AGFA AP OPTIMA 1 User Manual

65
Red Eye Correction
The Red Eye Correction function is used to reduce red eye 
in captured images. This function is only available for still 
images. Red eye correction can be applied to an image 
several times, but the quality may gradually deteriorate. 
To activate Red Eye Correction:
1. Set the camera to Playback mode.
2. Press the   or   keys to scroll and select an image.
3. Press the  MENU button to launch the Playback menu.
4. Select  Red Eye Correction .
5. Select  Start.
6. Press the  SET...

66
Voice Memo
The Voice Memo function allows you to record and attach a voice memo to a saved image. 
You can record a maximum of 30 seconds of Voice memo per image. This function is only 
available in still images. 
To record voice memo:
1. Set the camera to Playback mode.
2. Press the   or   keys to scroll and select an image  to attach voice memo to.
3. Press the  MENU button to launch the Playback menu.
4. Select  Voice Memo .
5. Select  Start, then press the  SET button to start 
recording.
6....

67
Photo Edit
The Photo Edit function lets you edit still images to apply different colors or tones for a more 
artistic effect. Edited photos in this function is saved as a new file.
To activate Photo Edit:
1. Set the camera to Playback mode.
2. Press the   or   keys to scroll and select an image to edit.
3. Press the  MENU button to launch the Playback menu.
4. Select  Photo Edit . The Photo Edit submenu appears.
5. Press the   or   keys to scroll and select an option. As you move through the...

68
Trim
The Trim function allows you to trim an image to another 
image size. This function is only available for still images.
To trim an image:
1. Set the camera to Playback mode.
2. Use the   or   keys to scroll and select an image to trim.
3. Press the  MENU button to launch the Playback menu.
B&WImage is saved in black and white.
NegativeImage appears to be the oppos ite of the original image.
MosaicImage is saved with mosaic tiles.
Vivid RedImage is saved with reddish tint.
Vivid GreenImage is...

69
4. Select 
Trim. The Trim screen layout is displayed on the LCD monitor.
5. Use the   control to change size. 
6. Use the navigation controls to move the image. 
7. Press the  SET button to appl y changes. A menu 
selection appears.
8. Select whether to:
•Overwrite.  Save and replace the old file with 
the new one.
• Save As.  Save the new file as a new one.
• Cancel.  Cancel resize.
9. Press the  SET button to save/cancel changes.
•   Trim function is not available for phot os with image size set to...

70
Resize
The Resize function allows you to change the image resolution of large images to smaller ones. 
This function is only available for still images. 
To resize an image:
1. Set the camera to Playback mode.
2. Use the   or   keys to scroll and select an image  to resize.
3. Press the  MENU button to launch the Playback menu.
4. Select  Resize. The Resize submenu is displayed on 
the LCD monitor.
5. Select size among: 8M, 5M, 3M, and VGA. Available  size settings may vary depending on original...

71
Startup Image
The Startup Image function allows you to setup a startup 
image when you turn on your camera. 1. Press the  MENU button to launch the Playback menu.
2. Select  Startup Image . The menu selection appears.
3. Select options: •System.  Use camera default image.
• My Photo.  Use the   or   keys to scroll and 
select desired image.
• Off.  Disable the startup image.
4. Press the  SET button to apply changes.
,The startup image will still be displayed star tup even if the selected image was...

72
To set DPOF on a single image/all images:
1. Select Single or All  on the DPOF submenu. 
2. For single image, use the   or   keys to scroll and  select an image to mark for printing.
3. Specify the number of copies. Use the   or   to  increase/decrease number.
4. Press the  FUNC button to toggle between turning 
on/off the date stamp. 
5. Press the  SET button to save DPOF settings.
To  r e s e t  D P O F :
1. Select  Reset on the DPOF submenu. A confirmation 
message appears.
2. Select  Yes. 
3....

73
PictBridge
The PictBridge function allows you to print images captured by your camera without connecting 
the camera to a PC. Print images with a  PictBridge compatible printer directly. 
To activate PictBridge:
Connect your camera to a PictBridge compatible  printer using the USB cable. See illustration 
below.
If the printer does not support date stamp, the date stamp function will be disable in 
PicBridge. Also, the date stamp selection will be gray.
Note 

74
Using the Setup Menu
You can access the Setup menu whether you are in Photo/Movie/Audio Record or Playback 
mode.
The Setup menu allows you to configure general camera settings.
To go to Setup Menu: 
1. Press   to launch the Record/Playback Menu.
2. In Photo Record or Playback mode, use the   or 
 keys to change the menu tab to  Setup  
menu. In Movie Record mode, Setup menu is 
automatically displayed.
3. Use the   or   keys to move through the menu  selections.
4. To select an item, press the  SET...