AGFA AP Microflex 102 User Manual

							 
 10 
Power Supply 
• Be sure to use the type of battery or battery charger that is 
suitable for this camera. Using any other type of battery or 
battery charger may damage the equipment and render the 
guarantee void. 
•  Make sure the batteries are placed in the correct position.  
Error in the orientation of ba tteries may damage this product 
and result in fire. 
•  Remove the batteries to avoid leakage of battery fluid when the 
camera is not to be used for a long period of time. 
•  Remove a dropped or damaged ba ttery immediately to avoid 
leakage of battery fluid or abnormal expansion. 
•  This camera uses either a lithium battery or 2 AA batteries. We 
recommend the use of a lithium battery for a longer operating 
time.  
						

							 
 11  
1 General Introduction  
Please read this chapter carefully to understand the features and 
functions of this AgfaPhoto Microflex 102. This chapter also includes 
a description of system requirements, package contents and 
hardware components. 
1.1 System Requirements 
In order to get the most out of your camera, your computer must 
meet the following system requirements: 
•  Windows® Vista / XP / 2000 operating system or Mac OS 10.3 
~10.4 
•  Intel® Pentium 4 2.8 GHz CPU or equivalent 
•  Memory: at least 512 MB RAM   
•  Standard USB 1.1 connection port or higher 
•  Display adapter with min. 64MB 
Note:  
USB 1.1 allows you to transmit files to the host, but using a USB 2.0 connection port will increase transmission speed greatly. 
1.2  Features 
This AgfaPhoto camera has many  features and functions including: 
•  5 Megapixel CMOS   
•  High-resolution camera (maximum 16 million pixels) 
•  3.0-inch touch screen 
•  2 SD card slots   
•  Slow Motion Playback 
•  Still image capture from a movie 
•  Still image capture in Video Mode 
•  Infrared Night Vision 
In addition, this video camera has a USB mass storage hard disk,  and SD card reader.  
						

							 
 12 
1.3  Accessories 
 Please check the contents of your camera package. It should contain: 
 
  
						

							 
 13 
1.4  Camera View 
  
						

							 
 14 
1.5    Adjusting the LCD Display 
Before starting to take pictures or record movie clips, rotate the LCD 
Display according to the illustrations below. 
 
 
  
						

							 
 15 
2 Getting Started 
Expand your camera’s storage by using SD or SDHC memory cards.  
2.1  Inserting an SD Card   
Insert an SD card with the label facing upwards 
. 
 
 
 
Note: Do not remove or insert an SD card when the camera is 
powered on to avoid damaging files.   
 
2.2  Inserting the Batteries 
Use only the batteries provided or recommended by the 
manufacturer or dealer.   
 
 
  
						

							 
 16 
Note
: Insert the batteries properly according to the description 
below. Inserting the batteries incorrectly could result in non-repairable damage to the camera. 
How to open the battery cover. 
 
 
 
  Battery Status Indicator: 
  Battery full 
 Battery half full 
 
Battery empty 
Insert the Lithium-ion battery / 2 AA batteries according to the 
illustration. 
  
						

							 
 17 
 
  
 
* Important:  
Use the supplied lithium-ion battery when using the Infrared Night 
Vision function. This function  is not supported when using AA 
batteries. 
1.  Close the battery cover. 
  
						

							 
 18 
2.3  Charging the Battery
You can use the supplied battery charger to charge the lithium battery.  
						

							 
 19 
 
2.4   Using the Touchscreen 
2.4.1 Single Touch  
The single touch function acts as
 a hotkey menu to adjust basic 
settings directly on the display:   
1.  Mode change to DV = Digital Video, DSC = Digital Still Camera  and Voice Recording 
2.  Resolution change to FULL HD, HD, WVGA, WEB or 16M, 8M,  5M, 3M