Home > AEM > Sensors Connectors & Accessories > AEM XWiFi KType Closed Tip Thermocouple Kit 302067 User Manual

AEM XWiFi KType Closed Tip Thermocouple Kit 302067 User Manual

Add to Favourites
    Download as PDF

    View the AEM XWiFi KType Closed Tip Thermocouple Kit 302067 User Manual for free. All the AEM manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 INSTALLATION 1. Disconnect the negative battery cable. 2. Using the supplied Stainless Steel 1/8”NPT compression mount, mount the EGT thermocouple as shown in Figure 2. Common locations for mounting the EGT thermocouple are 1-2 inches from the exhaust port, 2-3 inches before the turbine inlet, or in the header collector. 3. Connect the EGT thermocouple to the extension harness as shown in Figure 3. 4. Connect the 3-pin connector on the...
    Page 2 Page 2 Connecting the Thermocouple Slide the supplied heat shrink onto the sensor cable. Connect the RED wire from the thermocouple to the RED wire on the harness and the YELLOW wire from the thermocouple to the YELLOW wire on the harness using the supplied 4-40 screws and hex nuts. Make sure the connections are not touching. Center the heat shrink over the connections and apply mild heat to the heat shrink until it shrinks over the connections. See Figure 7. Notes If...
    Start reading AEM XWiFi KType Closed Tip Thermocouple Kit 302067 User Manual

    Related Manuals for AEM XWiFi KType Closed Tip Thermocouple Kit 302067 User Manual

    All AEM manuals