AEM Series 2 Plug Play EMS 306100 User Manual

							Page 11 of 12 This product is legal in California for racing vehicles only and should never be used on public highwa ys. 
 
30-1100 (Series 1) vs 30-6100 (Series 2)  Supra EMS  pin differences: 
The EMS functions assigned to certain pins have bee n changed and no longer match the 30
1100 EMS. Unless otherwise noted, the following pin s and functions will need to be manually 
reconfigured after using AEMTuner to convert a V1.1 9 (301100, Series 1 EMS) calibration for 
use with the 306100 Series 2 hardware.  
 
Pin 93-98 Supra harness destination 30-1100 function 30-6100 function Notes 
3A  Kickdown switch    Switch 3  
4A  Brake switch input    Switch 6  
11A  signal to ABS/ trac control    CAN1L  
12A  signal to cruise control    CAN1H  
17A  TT for datalink connector  Injector 10i  Injector  12 Inj12 controlled independently of inj10 
19A  TE2 for datalink connector  Injector 9i  Injector 11 Inj11 controlled independently of inj9 
20A  TE1 for datalink connector  PW 1   PW1 used for A/T control, not available  
as spare output 
22A  Fuel Pump ctrl  Coil 4  Coil 8 
Coil 4 reassigned to operate ignitor,   
Coil 8 must be used  to operate Fuel  
Pump 
24A  Main Relay ctrl  Coil 5  HS2 Coil 5 reassigned to operate ignitor,   
HS2 must be used to operate Main Relay 
25A  Manual indicator light (A/T)  FM  Coil 7 FM function became Coil 6  
Coil 6 reassigned to operate ignitor 
29A     Baro Volts  
(ADCR12) Available input… external baro or airbox 
pressure sensor 
30A    HS2    
36A      Injector 8 Injector 8 no longer used for A/T control,  
signal has been moved to empty pin 
37A    PW 2   PW2 available on pin B60 only 
38A  NEO to trac ECU    LS7 (tacho)  
5B  cam sensor G2 ground  TGND   G2 not used 
12B  AT sol 5  Idle 7  PW 1 Greater control resolution available using  
PW outputs for A/T solenoids 
13B  AT sol 4  Injector 8  PW 4 Greater control resolution available using  
PW outputs for A/T solenoids 
14B  AT sol 3  Idle 5  PW 3 Greater control resolution available using  
PW outputs for A/T solenoids 
52B  Igniter 6  Coil1 (waste spark)  Coil 6  
53B  Igniter 5  Coil 2 (waste spark)  Coil 5  
54B  Igniter 4  Coil 3 (waste spark)  Coil 4  
        
    
   
						

							Page 12 of 12 This product is legal in California for racing vehicles only and should never be used on public highwa ys. 
Electronics Warranty 
  
Advanced Engine Management Inc. warrants to the con sumer that all AEM Electronics 
products will be free from defects in material and  workmanship for a period of twelve months 
from date of the original purchase. Products that f ail within this 12month warranty period will 
be repaired or replaced when determined by AEM that  the product failed due to defects in 
material or workmanship. This warranty is limited t o the repair or replacement of the AEM part. 
In no event shall this warranty exceed the original  purchase price of the AEM part nor shall 
AEM be responsible for special, incidental or conse quential damages or cost incurred due to 
the failure of this product. Warranty claims to AEM  must be transportation prepaid and 
accompanied with dated proof of purchase. This warr anty applies only to the original purchaser 
of product and is nontransferable. All implied war ranties shall be limited in duration to the said 
12month warranty period. Improper use or installat ion, accident, abuse, unauthorized repairs 
or alterations voids this warranty. AEM disclaims a ny liability for consequential damages due to 
breach of any written or implied warranty on all pr oducts manufactured by AEM. Warranty 
returns will only be accepted by AEM when accompani ed by a valid Return Merchandise 
Authorization (RMA) number.  Product must be receiv ed by AEM within 30 days of the date the 
RMA is issued.  
  
Please note that before AEM can issue an RMA for an y electronic product, it is first necessary 
for the installer or end user to contact the tech l ine at 18004230046 to discuss the problem.  
Most issues can be resolved over the phone.  Under  no circumstances should a system be 
returned or a RMA requested before the above proces s transpires.
 
  
AEM will not be responsible for electronic products  that are installed incorrectly, installed in a 
non approved application, misused, or tampered with .  
  
Any AEM electronics product can be returned for rep air if it is out of the warranty period. There 
is a minimum charge of $50.00 for inspection and di agnosis of AEM electronic parts. Parts 
used in the repair of AEM electronic components wil l be extra. AEM will provide an estimate of 
repairs and receive written or electronic authoriza tion before repairs are made to the product.