Home > AEM > High Flow Fuel Pumps > AEM High Flow Fuel Pump 501000 User Manual

AEM High Flow Fuel Pump 501000 User Manual

Add to Favourites
    Download as PDF

    View the AEM High Flow Fuel Pump 501000 User Manual for free. All the AEM manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 WARNING: ! Due to the fact that this installation deals with your fuel system this installation is not for the mechanically challenged! If you are not mechanically inclined or do not understand the procedure please do not attempt the installation. Refer the installation to a reputable mechanic. AEM Performance Electronics 2205 126th Street Unit A, Hawthorne, CA. 90250 Phone: (310) 484-2322 Fax: (310) 484-0152...
    Page 2 Page 2 10-505 for Fuel Pump Kit 50-1205 CAUTION! Installation of the AEM Fuel Pump requires handling of Gasoline. It is imperative that all work is carried out in a well-ventilated area and a fire extinguisher rated for gasoline fires is within easy reach of all personnel working on the fuel system. Extinguish all open flames, prohibit smoking, eliminate all sources of static electricity or any other source of ignition BEFORE proceeding with installation. Wear protective clothing, goggles,...
    Page 3 Page 3 10-505 for Fuel Pump Kit 50-1205 Fuel Delivery Hose Sizes Gasoline Powered Engines Up to 499 HP .344” hose -6AN 500 - 799 HP .437” hose -8 AN 900 – 1100 HP .562” hose -10 AN The above table should be used for typical passenger car applications. However, for custom applications the hose run length will affect fuel delivery. If you have a long hose run, then the actual flow will have to be determined by running the fuel pump into a graduated cylinder, then measuring the flow vs. time and...
    Page 4 Page 4 10-505 for Fuel Pump Kit 50-1205 Installation Notes The AEM Fuel Pump is rated for all gasoline fuels. No warranty is made when used with fuels containing alcohol content 50% or more. When doing the installation of the AEM pump into a new fuel tank, we recommend that the pump is located in a sump or a chamber where baffling is used to reduce fuel slosh. BEFORE STARTING THE VEHICLE, CHECK THE ENTIRE FUEL DELIVERY SYSTEM FOR LEAKS AND REPAIR ANY LEAK BEFORE STARTING THE VEHICLE....
    Start reading AEM High Flow Fuel Pump 501000 User Manual

    Related Manuals for AEM High Flow Fuel Pump 501000 User Manual

    All AEM manuals