AEM Boost Control Solenoid Kit 302400 User Manual

							  
 
 
ADVANCED ENGINE MANAGEMENT INC. 
This product is legal in California for racing vehicles only and should never be used on public highways. 
Advanced Engine Management, 2205 126
th Street Unit A Hawthorne, CA. 90250, Phone: (310) 484-2322 Fax: (310) 484-0152 
Instruction Part Number: 10-2400, © 2008 Advanced Engine Management, Inc. 
 
BOOST CONTROL SOLENOID 
AEM P/N 30-2400 
 
 
The model 30-2400 Boost Control Solenoid is specially modified for use as a boost control solenoid in high boost 
automotive systems. The kit includes all the necessary fittings to plumb your wastegate for either an internal or external 
wastegate. 
 
The 30-2400 Kit Contains: 
1x Fast Response Solenoid 
1x Mating Connector Assembly 
1x 1/8” NPT Sintered Muffler 
2x 1/8” NPT to 3/16” Hose Barb Adapters 
 
Operating Voltage:  12VDC 
Operating Frequency:  31hz 
Duty Range:  10 to 90% 
Max Pressure:  120 PSI 
 
Electrical Connection:  Polarity is unimportant. Hook 
one wire to switched 12 Volts and the other to the AEM 
EMS’s PW2 output or the driving devices boost control 
line. NOTE: on the SRT4 EMS 30-1510 PW2 outputs +12V.  
Hook up one wire to PW2 and one wire to ground.   
If you are not sure please refer to your EMS instructions/pin 
out sheet and verified the polarity output on PW2.  
When energized, ports 1 & 2 are connected, when 
de-energized, ports 2 & 3 are connected. The port  
numbers are clearly noted on the solenoid body. 
 
 
 
 
  
						

							 
 
 
AEM Electronics Warranty 
  
Advanced Engine Management Inc. warrants to the consumer that all AEM Electronics products will 
be free from defects in material and workmanship for a period of twelve months from date of the 
original purchase. Products that fail within this 12-month warranty period will be repaired or replaced 
when determined by AEM that the product failed due to defects in material or workmanship. This 
warranty is limited to the repair or replacement of the AEM part. In no event shall this warranty 
exceed the original purchase price of the AEM part nor shall AEM be responsible for special, 
incidental or consequential damages or cost incurred due to the failure of this product. Warranty 
claims to AEM must be transportation prepaid and accompanied with dated proof of purchase. This 
warranty applies only to the original purchaser of product and is non-transferable. All implied 
warranties shall be limited in duration to the said 12-month warranty period. Improper use or 
installation, accident, abuse, unauthorized repairs or alterations voids this warranty. AEM disclaims 
any liability for consequential damages due to breach of any written or implied warranty on all 
products manufactured by AEM. Warranty returns will only be accepted by AEM when accompanied 
by a valid Return Merchandise Authorization (RMA) number.  Product must be received by AEM 
within 30 days of the date the RMA is issued. 
  
Please note that before AEM can issue an RMA for any electronic product, it is first necessary for the 
installer or end user to contact the tech line at 1-800-423-0046 to discuss the problem.  Most issues 
can be resolved over the phone.  Under no circumstances should a system be returned or a RMA 
requested before the above process transpires. 
  
AEM will not be responsible for electronic products that are installed incorrectly, installed in a non 
approved application, misused, or tampered with.  
  
Any AEM electronics product can be returned for repair if it is out of the warranty period. There is a 
minimum charge of $50.00 for inspection and diagnosis of AEM electronic parts. Parts used in the 
repair of AEM electronic components will be extra. AEM will provide an estimate of repairs and 
receive written or electronic authorization before repairs are made to the product.