AEG Sz 91840 5i User Manual

Het verwijderen van de geleiders van de schappen
Uw apparaat is voorzien van borgklemmen voor
de schappen die het mogelijk maken de schappen
vast te zetten tijdens transport.
Om deze te verwijderen gaat u als volgt te werk:
1. Trek de schaphouders in de richting van de pijl
(A).
2. Til het schap aan de achterkant op en duw het
naar voren tot het vrij komt (B).
3. Verwijder de borgklemmen (C).
Elektrische aansluiting
Zorg er vóór het aansluiten voor dat het voltage en de frequentie op het typeplaatje...

Bij aflevering zit het koolstoffilter in een plastic
zak om de levensduur en eigenschappen ervan te
garanderen. Het filter moet achter de klep ge-
plaatst worden voordat het apparaat wordt inge-
schakeld.
1. Open de klep (1)
2. Haal het filter uit de plastic zak
3. Plaats het filter in de gleuf in de achterkant
van het klepdeksel (2)
4. Sluit de klep
Houd tijdens de werking de ventilatieklep altijd
gesloten.
Het filter moet voorzichtig worden gehanteerd
om te voorkomen dat deeltjes van het oppervlak...

Thank you for choosing one of our high-quality products.
To ensure optimal and regular performance of your appliance please read this
instruction manual carefully. It will enable you to navigate all processes perfectly
and most efficiently. To refer to this manual any time you need to, we recommend
you to keep it in a safe place. And please pass it to any future owner of the
appliance.
We wish you much joy with your new appliance.
CONTENTS
SAFETY INFORMATION  24
Children and vulnerable people safety...

 SAFETY INFORMATION
In the interest of your safety and to ensure the correct use, before installing and first using
the appliance, read this user manual carefully, including its hints and warnings. To avoid
unnecessary mistakes and accidents, it is important to ensure that all people using the ap-
pliance are thoroughly familiar with its operation and safety features. Save these instruc-
tions and make sure that they remain with the appliance if it is moved or sold, so that ev-
eryone using it through...

WARNING!
Any electrical component (power cord, plug, compressor) must be replaced by a certified
service agent or qualified service personnel.
1. Power cord must not be lengthened.
2. Make sure that the power plug is not squashed or damaged by the back of the appli-
ance. A squashed or damaged power plug may overheat and cause a fire.
3. Make sure that you can come to the mains plug of the appliance.
4. Do not pull the mains cable.
5. If the power plug socket is loose, do not insert the power plug. There...

• Unpack the appliance and check if there are damages on it. Do not connect the appli-
ance if it is damaged. Report possible damages immediately to the place you bought it.
In that case retain packing.
• It is advisable to wait at least four hours before connecting the appliance to allow the oil
to flow back in the compressor.
• Adequate air circulation should be around the appliance, lacking this leads to overheat-
ing. To achieve sufficient ventilation follow the instructions relevant to...

10Freezer temperature regulator, + button
11Freezer temperature indicator
12Freezer temperature regulator, - button
13FROSTMATIC indicator
14FROSTMATIC button
15Alarm indicator ( ALARM OFF)
16Alarm reset button (ALARM OFF)
Switching on the fridge
1. Insert the plug into the mains socket.
2. Press ON/OFF switch .
3. The Pilot Light will light up.
Switching on the freezer
1. Insert the plug into the mains socket.
2. Press ON/OFF switch .
3. The Pilot Light will light up.
4. The alarm indicator light...

• The temperature indicator is switched over from the indicator of the ACTUAL tempera-
ture (Temperature indicator is illuminated) to the indicator of the DESIRED temperature
(Temperature indicator flashes) by pressing one of the Temperature setting buttons.
• Each time one of the two buttons is pressed again the DESIRED temperature is adjusted
by 1°C. The DESIRED temperature must be reached within 24 hours.
If neither button is pressed, the temperature indicator automatically switches back after a
short...

2. The TURBO COOLMATIC indicator switches off.
FROSTMATIC function
The FROSTMATIC function accelerates the freezing of fresh food and, at the same time, pro-
tects foodstuffs already stored from undesirable warming.
To activate the function, do these steps:
1. Press the FROSTMATIC button.
2. The FROSTMATIC indicator switches on.
The FROSTMATIC function is ended automatically after a period of 52 hours.
You can deactivate the function at any time:
1. Press the FROSTMATIC button.
2. The FROSTMATIC...

In the event of accidental defrosting, for example due to a power failure, if the power has
been off for longer that the value shown in the technical characteristics chart under rising
time, the defrosted food must be consumed quickly or cooked immediately and then re-
frozen (after cooling).
Frozen Food Calendar
The symbols show different types of frozen goods.
The numbers indicate storage times in months for the appropriate types of frozen goods.
Whether the upper or lower value of the indicated...