AEG Sk 78800 5i Operating And Installation Instructions

SANTO
Built-In Refrigerator
Operating and Installation Instructions
K 78800-5 i
 

2

Dear customer,

Before switching on your new appliance please read these operating
instructions carefully. They contain important information for safe use,
for installation and for care of the appliance.
Please keep these operating instructions for future reference. Pass
them on to possible new owners of the appliance.
These operating instructions are for use with several technically com-
parable models with varying accessories. Please observe the notes
which apply to your model.
Notes which are...

3

Contents

Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . 6

Appliance Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Disposal of old Appliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . 6

Remove transport packaging . . . . . . . . . . . . . . . . . . . . . . . ....

4

Important Safety Instructions

These warnings are provided in the interests of your safety. Ensure
you fully understand them before installing or using the appliance.
Your safety is of paramount importance. If you are unsure about the
meaning of these warnings contact the Customer Care Department
for assistance.
Intended use

¥ The refrigerator is intended for use in the home. It is suitable for thestoring of food at low temperature. If the appliance is used for pur-
poses other than those intended...

5
Important Safety Instructions
¥ Please make old appliances unusable prior to disposal. Pull out themains plug, cut off the mains cable, break or remove spring or bolt
catches, if fitted. By doing this you ensure that children cannot lock
themselves in the appliance when playing (there is risk of suffoca-
tion!) or get themselves into other dangerous situations.
¥ Often children cannot recognise the hazards present in household appliances. It is therefore important that you ensure adequate super-...

6

Disposal
Appliance Packaging Information

All materials are environmentally sound! They can be disposed of or
burned at an incinerating plant without danger.
About the materials: The plastics can be recycled and are identified as
follows:
>PE< for polyethylene, e.g. the outer covering and the bags in the
interior.
>PS< for polystyrene foam, e.g. the pads, which are all free of chlo-
rofluorocarbon.
The carton parts are made from recycled paper and should be disposed
of at a waste-paper recycling...

7

Remove transport packaging

The appliance and the interior fittings are protected for transport.

+
1.
Pull off the adhesive tape on the left and right side of the door.

2.
Remove all adhesive tape and packing pieces from the interior of the
appliance.

Installation
Installation Location

The appliance should be set up in a well ventilated, dry room.
Energy use and efficient performance of the appliance is affected by
the ambient temperature.
The appliance should therefore
Ð not be exposed to direct...

8
Installation

Building-in

Please check whether, after installing your appliance and especially
after reversing the door, the door seal seals right round. A badly fitting
door seal may lead to heavy frosting and thereby to a higher power
consumption (see also ãWhat to do if...Ò).

Your refrigerator needs air
Integratable models (i-appliances)

The integrated door of the furniture cabi-
net largely seals the installation recess. 
i-appliances must therefore be provided
with ventilation by having an...

9
Installation

Dimensions of the recess

Height of housing 880 mm
Depth of housing 550 mm
Width of housing 560 mm
It is necessary that the cabinet
has a ventilation recess (at least
200 cm
2).

+
1.
The applianceÕs door has been locked in
position for transport by means of pins
on both sides. According to the door
opening direction, remove relevant pins
at the top and at the bottom.

B A
2.Press in the joint covers between the
appliance and the kitchen furniture.
D765
 

10
Installation

5.
Snap vent grill (B) and hinge cover (E) into
position.
Apply blanking covers (C-D) as indicated.

6.
Separate parts  Ha, Hb, Hc, Hd as shown
in the figure.

3.
Fit the appliance in the niche by making
sure that it stands against the interior
surface of the unit on the side where the
door hinges of the appliances are fitted.
Insert the appliance until the upper strip
butts up against the unit (1) and make
sure that the lower hinge is in line with
the surface of the unit (2).

4.
Open...