AEG Sc 71840 6i User Manual

Fridge-Freezer


	
User manual




 

2
Dear Customer
Thank you for choosing one of our high-quality products.
With this appliance you will experience the perfect combination of func-
tional design and cutting edge technology.
Convince yourself that our appliances are engineered to deliver the best
performance and control - indeed we are setting the highest standards of
excellence.
In addition to this you find environmental and energy saving aspects as an
integral part of our products.
To ensure optimal and regular performance of your...

3
Contents
Safety  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Disposal  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Appliance Packaging Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Disposal of old Appliances  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Remove transport safeguard  . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

4
Safety
The safety aspects of our refrigerators/freezers comply with accepted tech-
nical standards and the German Appliance Safety Law. Nevertheless, we
consider it our obligation to make you aware of the following safety infor-
mation:
Intended use
• The refrigerator is intended for use in the home. It is suitable for the coo-
ling, freezing and storing of frozen food, as well as for making ice. If the
appliance is used for purposes other than those intended or used incor-
rectly, no liability can be...

5
fridge when playing (there is risk of suffocation!)or get themselves into
other dangerous situations.
 This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction con-
cerning use of the appliance by a person responsible for their safety. Chil-
dren should be supervised to ensure that they do not play with the
appliance.!
Daily Operation
...

6
Disposal
Appliance Packaging Information
All materials are environmentally sound! They can be dumped or burned at
an incinerating plant without danger!
About the materials: The plastics can be recycled and are identified as fol-
lows:
>PE< for polyethylene, e.g. the outer covering and the bags in the interior.
>PS< for polystyrene foam, e.g. the pads, which are all free of chlorofluo-
rocarbon.
The carton parts are made from recycled paper and should be disposed of
at a waste-paper recycling collection...

7
Installation
Installation Location
The appliance should be set up in a well ventilated, dry room.
Energy use is affected by the ambient temperature. The appliance should
therefore
– not be exposed to direct sunlight;
– not be installed next to radiators, cookers or other sources of heat;
– only be installed at a location whose ambient temperature corresponds to
the climate classification, for which the appliance is designed.
The climate classification can be found on the serial plate, which is located...

8
Your appliance needs air
For safety reasons, minimum
ventilationmust be as shown Fig.
Attention: keep ventilation ope-
nings clear of obstruction;



	
	



Rehingeing the door
The side at which the door opens
can be changed from the right
side (factory adjustment) to the
left side, if the installation site
requires.
Warning!When changing the
side at which the door opens, the
appliance may not be connected
to the mains. Remove plug from
the mains beforehand.
1. Unscrew the...

9
Housing dimensions
Height 1780 mm
Depth 550 mm
Width 560 mm
Instructions for total built-in
Apply joint the sealing strip as
shown in figure.
8. Refit the upper door and rescrew the
hinge pin and the spacer on the
opposite side 
Make sure that a distance of 44 mm
is maintained in the lower part bet-
ween the kitchen furniture and the
border of the appliance.
The lower hinge cover inserted in the
accessories bag, is useful to guaran-
tee the exact position of the kitchen
furniture and the appliance....

10
Apply covers (C-D) on joint cover
lugs and into hinge holes.
Snap vent grille (B) and hinge covers
(E) into position.
BE
E
DC
Fasten the appliance with 4
screws provided in the kit
included with the appliance. 
I
I
From the plastic cover (E), which is
used to cover the hinge with the
pivot pin, you must take away the
part as indicated in the drawing.
This operation is made easer since
there is, in the internal part of the
cover hinge lid a groove that facila-
tes the removal of this coomponent....