AEG S 86378 Kg Operating Instructions

							Maintenance and Cleaning
818 36 55-00/341
Replacing the light bulb
3 For safety reasons the interior lighting switches off after 7 minutes 
when the door is open. It switches on again the next time the door is 
opened. 
1 Warning!  Danger of electrical shock! Before replacing the light bulb 
switch off the appliance and remove the mains plug.
Light bulb specifications: 220-240 V, max. 25 W, fitting: E 14 
0 1.To switch the appliance off press and hold the ON/OFF button.
2.Unplug the mains plug.
3.To change the light bulb, undo the 
cross head screw and remove the 
light bulb cover downwards.
4.Change the defective light bulb.
5.Refit the light bulb cover and the 
cross head screw.
 
						

							42818 36 55-00/3
Hints and Tips
Normal Operating Sounds
 You may hear faint gurgling or bubbling sounds when the refrigerant 
is pumped through the coils or tubing at the rear, to the cooling 
plate/evaporator. 
 When the compressor is on, the refrigerant is being pumped round 
and you will hear a whirring sound or pulsating noise from the 
compressor.
 A thermostat controls the compressor and you will hear a faint click 
when the thermostat cuts in and out.
 A murmuring noise can be made by the flows of air created by the 
fan.
Food Storage
To obtain the best performance from your refrigerator/freezer:
 Do not store warm food or evaporating liquids.
 Do not store food uncovered.
 Keep the time between buying chilled food and placing it in your 
freezer as short as possible.
 Do not push food together too much, try to allow air to circulate 
around each item.
2 Energy Saving Advice
 Do not install the appliance close to sources of heat, such as a cooker, 
dishwasher or radiator.
 Locate the appliance in a cool well ventilated room and make sure 
that the air openings of the appliance are not obstructed.
 Always leave warm food to cool down to room temperature before 
placing in the freezer compartment.
 Try to avoid keeping the door open for long periods or opening the 
door too frequently as warm air will enter the cabinet and cause the 
compressor to switch on unnecessarily often.
 Ensure there are no obstructions preventing the door from closing 
properly.
 
						

							818 36 55-00/343
What to do if ...
Before contacting your local Service Force Centre, check the following 
points.
SymptomSolution
No power to the appliance.
Check there is power at the socket
Check there is not a power cut by 
checking the household lights.
Check the fuse has not blown.
Appliance cools too much.
Temperature is set too cold.
Temporarily select a higher temperature 
setting.
The temperature in the refrigerator/
freezer is too high.
Check the ambient temperature is within 
the appliances operating limits
Check the temperature setting is correct 
relative to ambient conditions.
In the display, “POWER” is displayed.
There was a power failure.
Please check whether the power plug is 
plugged in or whether the fuse has been 
tripped (see also section “Control and 
information system”). Check the status of 
the food.
Temperature display shows a square or a 
letter. In the display, “SERVICE” is dis-
played.There is a function fault.
Please contact your local Service Force 
Centre. Do not open the door of the 
appliance again.
Warning tone sounds, in the display 
“DOOR OPEN” and a red back light are 
flashing“Open door“ warning.
Please check in Control and Information 
System section.
Warning tone sounds, a red back light is 
flashing. “TEMPERATURE” is flashing in 
the displayTemperature warning for freezer section 
or fridge section.
Please check in Control and Information 
System section.
Interior illumination does not function.
Important: The interior lighting switches 
off automatically after 7 minutes. Please refer to Replace Light Bulb  
section.
 
						

							44818 36 55-00/3
If after the above checks there is still a fault, call your local AEG Service 
Force Centre.
In-guarantee customers should ensure that the above checks have been 
made as the engineer will make a charge if the fault is not a 
mechanical or electrical breakdown.
Please note that proof of purchase is required for in-guarantee service 
calls.
Regulations, Standards, Guidelines
This appliance was designed for household use and was manufactured 
in accordance with the appropriate standards. The necessary measures 
in accordance with appliance safety legislation regulations (GSG), 
accident prevention regulations for refrigeration appliances (VBG 20) 
and the regulations of the German Society of Electrical Engineers (VDE) 
were observed in the manufacture of this appliance.
The refrigerant circuit has been checked for leaks.
Excessive build up of frost.
If the door seal is not airtight (probably 
after reversing the door) apply warm air 
to the non sealing area using a hair dryer 
set to a gentle heat. (do not use a fan 
heater for this purpose). This will make 
the rubber more supple and allow it to 
revert to its original shape.
The compressor runs continuously 
Adjust the temperature to give correct 
temperature control.
Check that the doors are closed.
Large quantities of food have recently 
been placed in the cabinet and/or door is 
frequently opened.
Check that air ventilation is not 
obstructed.
NoiseRefer to Normal Operating Sounds
The compressor does not start 
immediately after changing the 
temperature setting.This is normal, the compressor starts after 
a period of time.
SymptomSolution
 
						

							818 36 55-00/345
; This appliance is in accordance with the following EU guidelines:
– 73/23/EWG dated 19 February 1973 - low voltage guidelines.
– 89/336/EWG dated 3 May 1989
(including guideline change notice 92/31/EWG) - EMV guideline 
Technical Terminology
Refrigerant
Liquids that can be used to a generate a cooling effect are known as 
refrigerants. They have a relatively low boiling-point, indeed so low, 
that the warmth from the food stored in the fridge or freezer can 
cause the refrigerant to boil and vaporise.
Refrigerant Circuit
Closed circulation system that contains the refrigerant. The 
refrigerant circuit comprises primarily of an evaporator, a compressor, 
a condenser and pipe work.
Evaporator
The refrigerant is evaporated in the evaporator. Similar to all other 
liquids, refrigerant requires heat to evaporate. This heat is removed 
from the interior of the appliance, as a result the interior is cooled. 
The evaporator is therefore located inside the appliance or placed in 
foam immediately behind the inner wall and thus not visible.
Compressor
The compressor looks like a small drum. It is driven by a built-in 
electric motor and is mounted on the base of the appliance at the 
rear. The task of the compressor is to draw in vaporised refrigerant 
from the evaporator, to compress it, and to pass it on to the 
condenser.
Condenser
The condenser normally has the form of a grid. The refrigerant 
compressed in the compressor is liquefied in the condenser. During 
this process, heat is released to the surrounding air at the surface of 
the condenser. The condenser is mounted on the base of the 
appliance.
 
						

							46818 36 55-00/3
Guarantee Conditions
Standard Guarantee Conditions
We, AEG, undertake that if within 12 months of the date of the purchase this AEG 
appliance or any part thereof is proved to be defective by reason only of faulty 
workmanship or materials, we will, at our discretion repair or replace the same FREE OF 
CHARGE for labour, materials or carriage on condition that:
 The appliance has been correctly installed and used only on the electricity or gas 
supply stated on the rating plate.
 The appliance has been used for normal domestic purposes only, and in accordance 
with the manufacturers operating and maintenance instructions.
 The appliance has not been serviced, maintained, repaired, taken apart or tampered 
with by any person not authorised by us.
 All service work under this guarantee must be undertaken by a Service Force Centre.  
Any appliance or defective part replaced shall become the Companys property.
 This guarantee is in addition to your statutory and other legal rights.
 Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be 
available outside these hours in which case a premium will be charged.
Exclusions
This guarantee does not cover:
 Damage or calls resulting from transportation, improper use or neglect, the 
replacement of any light bulbs or removable parts of glass or plastic.
 Costs incurred for calls to put right an appliance which is improperly installed or calls 
to appliances outside the United Kingdom.
 Appliances found to be in use within a commercial environment, plus those which 
are subject to rental agreements.
 Products of AEG manufacture which are not marketed by AEG.
European Guarantee
If you should move to another country within Europe then your guarantee moves with 
you to your new home subject to the following qualifications:
 The guarantee starts from the date you first purchased your product.
 The guarantee is for the same period and to the same extent for labour and parts as 
exists in the new country of use for this brand or range of products.
 This guarantee relates to you and cannot be transferred to another user.
 Your new home is within the European Community (EC) or European Free Trade Area.
 The product is installed and used in accordance with our instructions and is only used 
domestically, i.e. a normal household.
 The product is installed taking into account regulations in your new country.
Before you move please contact your nearest Customer Care centre, listed below, to 
give them details of your new home. They will then ensure that the local Service 
Organisation is aware of your move and able to look after you and your appliances..
France Senlis +33 (0) 3 44 62 29 29
Germany Nürnberg +49 (0) 800 234 7378
Italy Pordenone +39 (0) 800 117511
Sweden Stockholm +46 (0) 8 672 5360
UK Slough +44 (0) 1753 219899
 
						

							818 36 55-00/347
Service & Spare Parts
In the event of your appliance requiring service, or if you wish to pur-
chase spare parts, please contact Service Force by telephoning:
08705 929 929
Your telephone call will be automatically routed to the Service Force 
Centre covering your post code area.
For the adress of your local Service Force Centre and further informa-
tion about Service Force, please visit the website at 
www.serviceforce.co.uk
Before calling out an engineer, please ensure you have read the details 
under the heading „What to do if.....“
When you contact the Service Force Centre you will need to give the 
following details:
1. Your name, address and post code.
2. Your telephone number
3. Clear and concise details of the fault.
4. The model and serial number of the appliance (found on the 
rating plate).
5. The purchase date
Please note that a valid purchase receipt or guarantee documentation 
is required for in-guarantee service calls.
Customer Care
For general enquiries concerning your AEG appliance or for further 
information on AEG products please contact our Customer Care 
Department by letter or telephone at the address below or visit our 
website at www.aeg.co.uk.
Customer Care Department
AEG Domestic Appliances
55-77 High Street
Slough
Berkshire, SL1 1DZ
Tel. 08705 350350 (*)
(*) Calls may be recorded for training purposes Model Name
 Model Number (PNC)
 Serial Number (S-No.)
 
						

							From the Electrolux Group. The world´s No.1 choice.
The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor
use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines,
vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more
than 150 countries around the world.
AEG Hausgeräte GmbH
Postfach 1036
D-90327 Nürnberg
http://www.aeg.hausgeraete.de
© Copyright by AEG
818 36 55 – 00/3 - 0105
Subject to change without notice