AEG S 83200 Cmm0 User Manual

S83200CMM0
S83600CMM0ENFRIDGE FREEZER USER MANUAL
 

FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have
created it to give you impeccable performance for many
years, with innovative technologies that help make life
simpler – features you might not find on ordinary
appliances. Please spend a few minutes reading to get the
very best from it.
ACCESSORIES AND CONSUMABLES
In the AEG webshop, you’ll find everything you need to
keep all your AEG appliances looking spotless and
working perfectly. Along with a wide range of accessories
designed...

CONTENTS
4 Safety information
7 Control panel
11 First use
12 Daily use
16 Helpful hints and tips
18 Care and cleaning
19 What to do if…
21 Technical data
21 Installation
24 Environmental concerns
The following symbols are used in this user
manual:
Important information concerning your
personal safety and information on how to
avoid damaging the appliance.
General information and tips
Environmental information
Subject to change without noticeContents
3
 

 SAFETY INFORMATION
In the interest of your safety and to ensure the correct use, before installing and first using
the appliance, read this user manual carefully, including its hints and warnings. To avoid
unnecessary mistakes and accidents, it is important to ensure that all people using the ap-
pliance are thoroughly familiar with its operation and safety features. Save these instruc-
tions and make sure that they remain with the appliance if it is moved or sold, so that ev-
eryone using it through...

• It is dangerous to alter the specifications or modify this product in any way. Any damage
to the cord may cause a short-circuit, fire and/or electric shock.
WARNING!
Any electrical component (power cord, plug, compressor) must be replaced by a certified
service agent or qualified service personnel to avoid hazard.
1. Power cord must not be lengthened.
2. Make sure that the power plug is not squashed or damaged by the back of the appli-
ance. A squashed or damaged power plug may overheat and cause a...

Installation
For electrical connection carefully follow the instructions given in specific paragraphs.
• Unpack the appliance and check if there are damages on it. Do not connect the appli-
ance if it is damaged. Report possible damages immediately to the place you bought it.
In that case retain packing.
• It is advisable to wait at least four hours before connecting the appliance to allow the oil
to flow back in the compressor.
• Adequate air circulation should be around the appliance, lacking this...

CONTROL PANEL
1
7
6
5
2
3
4
1Fridge temperature colder button
2Fridge temperature warmer button
3ON/OFF button
OK button
4Freezer temperature warmer button
5Display
6Freezer temperature colder button
7Mode button
It is possible to change predefined sound of buttons to a loudly one by pressing togeth-
er MODE 
7 and MINUS 6 for some seconds. Change is reversible.
Display
9
8
7
10
1
6
5
3
2
4
1Fridge temperature indicator
2Holiday function
3Extra humidity function
4Fridge Off
5Freezer temperature...

8FROSTMATIC function
9COOLMATIC function
10Child Lock function
Switching on
To switch on the appliance do these steps:
1. Connect the mains plug to the power socket.
2. Press the appliance ON/OFF button if the display is off.
3. The alarm buzzer could operate after few seconds.
To reset the alarm refer to High temperature alarm.
4. If dEMo appears on the display, the appliance is in demonstration mode. Refer to
What to do if....
5. The temperature indicators show the set default temperature.
To select a...

Set default temperature:
• +5°C for the fridge
•-18°C for the freezer
The temperature indicators show the set temperature.
To restore the set default temperature switch off the appliance.
The set temperature will be reached within 24 hours.
Fluctuations of some degrees around set temperature are normal and does not mean any
fault in the appliance.
After a power failure the set temperature remains stored.
Child Lock function
To lock the buttons from unintentional operation select the Child Lock function....

1. Press the Mode button until the corresponding icon appears.
The COOLMATIC indicator flashes.
2. Press the OK button to confirm.
The COOLMATIC indicator is shown.
The COOLMATIC function shuts off automatically after approximately 6 hours.
To switch off the function before its automatic end:
1. Press the Mode button until the COOLMATIC indicator flashes.
2. Press the OK button to confirm.
3. The COOLMATIC indicator goes off.
The function switches off by selecting a different fridge set temperature....