AEG Oven BP861511KM User Manual

							6.2 The menus in overview
Main menuSym-
bolMenu itemApplicationHeating FunctionsContains a list of heating functions.Assisted CookingContains a list of automatic programmes.PyrolysisPyrolytic cleaning.Basic SettingsUsed to set other settings.FavouritesContains a list of favourite cooking programmes
created by the user.
Submenu for: Basic Settings
Sym-
bolSubmenuDescriptionSet Time of DaySets the current time on the clock.Time IndicationWhen ON, the display shows the current time
when you deactivate the appliance.Fast heat upWhen ON, the function decreases the heat-up
time.Set + GoTo set a function and activate it later with a press
of any symbol on the control panel.Heat + HoldKeeps the prepared food warm for 30 minutes af-
ter a cooking cycle finished.Time ExtensionActivates and deactivates the time extension
function.Display ContrastAdjusts the display contrast by degrees.Display BrightnessAdjusts the display brightness by degrees.Set LanguageSets the language for the display.Buzzer VolumeAdjusts the volume of press-tones and signals by
degrees.Key TonesActivates and deactivates the tone of the touch
fields. It is not possible to deactivate the tone of
the ON / OFF touch field.Alarm/Error TonesActivates and deactivates the alarm tones.Cleaning AssistantGuides you through the cleaning procedure.ENGLISH11                   
						

							Sym-
bolSubmenuDescriptionCleaning ReminderReminds you when to clean the appliance.DEMO modeActivation / deactivation code: 2468ServiceShows the software version and configuration.Factory SettingsResets all settings to factory settings.6.3  Heating FunctionsHeating functionApplicationTrue Fan CookingTo bake on up to three shelf positions at the same
time and to dry food. Set the temperature 20 - 40
°C lower than for the function: Conventional
Cooking.Pizza SettingTo bake food on one shelf position for a more in-
tensive browning and a crispy bottom. Set the
temperature 20 - 40 °C lower than for the func-
tion: Conventional Cooking.Slow CookingTo prepare tender, succulent roasts.Conventional CookingTo bake and roast food on one shelf position.Frozen FoodsTo make convenience food like e.g. french fries,
potato wedges or spring rolls crispy.Turbo GrillingTo roast larger meat joints or poultry with bones
on one shelf position. Also to make gratins and to
brown.Fast GrillingTo grill flat food in large quantities and to toast
bread.GrillingTo grill flat food and to toast bread.Keep WarmTo keep food warm.DefrostThis function can be used for defrosting frozen
foods, such as vegetables and fruits. The defrost-
ing time depends on the amount and size of the
frozen food.www.aeg.com12               
						

							Heating functionApplicationBottom HeatTo bake cakes with crispy bottom and to preserve
food.Moist Fan BakingTo prepare baked goods in tin on one shelf posi-
tion. To save energy during cooking. This function
must be used in accordance with the cooking ta-
bles in order to achieve the desired cooking re-
sult. To get more information about the recom-
mended settings, refer to the cooking tables. This
function was used to define the energy efficiency
class acc. to EN 60350-1.Dough ProvingFor controlled rising of yeast dough before bak-
ing.Bread BakingTo bake bread.Au GratinFor dishes such as lasagna or potato gratin. Also
to gratinate and brown.PreservingTo make vegetable preserves such as pickles.DryingTo dry sliced fruit (e.g. apples, plums, peaches)
and vegetables (e.g. tomatoes, zucchini, mush-
rooms).Plate WarmingTo preheat plates for serving.ECO RoastingWhen you use this function during cooking, it al-
lows you to optimize the energy consumption. To
get more information about the recommended
settings, refer to the cooking tables with the
equivalent function (Turbo Grilling).6.4  Activating a heating
function
1. Activate the appliance.
2. Select the menu: Heating Functions.
3. Press 
 to confirm.
4. Select a heating function.
5. Press 
 to confirm.
6. Set the temperature.
7. Press 
 to confirm.
6.5  Heat-up indicator
When you activate a heating function,
the bar on the display comes on. The bar shows that the temperature increases.
When temperature is reached the buzzer sounds 3 times and the bar flashes and
then disappears.6.6  Fast Heat Up Indicator
This function decreases the heat-up time.
ENGLISH13             
						

							Do not put food in the oven
when the Fast heat up
function operates.
To activate the function, hold  for 3
seconds. The heat-up indicator
alternates.
6.7  Residual heat
When you deactivate the appliance, the display shows the residual heat. You can
use the heat to keep the food warm.7.  CLOCK FUNCTIONS7.1  Clock functions tableClock functionApplicationMinute MinderTo set a countdown (max. 2 h 30 min). This
function has no effect on the operation of the
appliance. You can also activate it when the
appliance is deactivated.
Use 
 to activate the function. Press  or
 to set the minutes and  to start.
DurationTo set the length of an operation (max. 23 h
59 min).End TimeTo set the switch-off time for a heating func-
tion (max. 23 h 59 min).If you set the time for a clock function,
the time starts to count down after 5
seconds.If you use the clock
functions: Duration, End
Time, the appliance
deactivates the heating
elements after 90 % of the
set time. The appliance uses
the residual heat to continue
the cooking process until the
time ends (3 - 20 minutes).7.2  Setting the clock functionsBefore you use the
functions: Duration, End
Time, you must set a heating
function and temperature
first. The appliance
deactivates automatically.
You can use the functions:
Duration and End Time at
the same time if you want to
automatically activate and
deactivate the appliance on
a given time later.
The functions: Duration and
End Time do not work when
you use the core
temperature sensor.
1. Set a heating function.
2. Press 
 again and again until the
display shows the necessary clock
function and the related symbol.
3. Press 
 or  to set the necessary
time.
www.aeg.com14               
						

							4.Press  to confirm.
When the time ends, an acoustic signal
sounds. The appliance deactivates. The
display shows a message.
5. Press any symbol to stop the signal.7.3  Heat + Hold
Conditions for the function:
• The set temperature is more than 80 °C.
• The function: Duration is set.
The function: Heat + Hold keeps
prepared food warm at 80 °C for 30
minutes. It activates after the baking or roasting procedure ends.
You can activate or deactivate the
function in the menu: Basic Settings.
1. Activate the appliance.
2. Select the heating function.
3. Set the temperature above 80 °C.
4. Press 
 again and again until the
display shows: Heat + Hold.
5. Press 
 to confirm.
When the function ends, an acoustic
signal sounds.
The function stays on if you change the
heating functions.7.4  Time Extension
The function: Time Extension makes the
heating function continue after the end of Duration.
Applicable to all heating
functions with Duration or
Weight Automatic.
Not applicable to heating
functions with the core
temperature sensor.
1. When the cooking time ends, an
acoustic signal sounds. Press any
symbol.
The display shows the message.
2. Press 
 to activate or  to
cancel.
3. Set the length of the function.
4. Press 
.
8.  AUTOMATIC PROGRAMMESWARNING!
Refer to Safety chapters.8.1  Automatic programmes
The automatic programmes give
optimum settings for each type of meat
or other recipes.
• Meat programmes with the function: Weight Automatic (menu: Assisted
Cooking) — This function
automatically calculates the roasting
time. To use it you need to input food
weight.
• Meat programmes with the function: Food Sensor Automatic (menu:
Assisted Cooking) — This function
automatically calculates the roasting
time. To use it you need to input core
temperature. When the programme
ends an acoustic signal sounds.
• Recipe Automatic (menu: Assisted Cooking) — This function uses
predefined values for a dish. Prepare
the dish according to recipe from this
book.Dishes with the function:
Weight AutomaticRoast PorkRoast VealBraised meatRoast GameRoast LambChicken, wholeTurkey, wholeDuck, wholeGoose, wholeENGLISH15         
						

							Dishes with the function:
Food Sensor AutomaticLoin of PorkRoast BeefScandinavian BeefLoin of GameLamb Joint, mediumBoned PoultryWhole Fish8.2  Assisted Cooking with
Recipe Automatic
This appliance has a set of recipes you
can use. The recipes are fixed and you
cannot change them.
1. Activate the appliance.
2. Select the menu: Assisted Cooking.
Press 
 to confirm.
3. Select the category and dish. Press
 to confirm.
4. Select a recipe. Press 
 to confirm.
When you use the function:
Manual, the appliance uses
the automatic settings. You
can change them as with
other functions.8.3  Assisted Cooking with
Weight Automatic
This function automatically calculates the
roasting time. To use it, it is necessary to
input the food weight.
1. Activate the appliance.
2. Select the menu: Assisted Cooking.
Press 
 to confirm.
3. Select the category and dish. Press
 to confirm.
4. Select the function: Weight
Automatic. Press 
 to confirm.
5. Touch 
 or  to set the food
weight. Press 
 to confirm.
The automatic programme starts.
6. You can change the weight at any
time. Press 
 or  to change the
weight.
7. When the time ends, an acoustic
signal sounds. Press any symbol to
deactivate the signal.
With some programmes turn
over the food after 30
minutes. The display shows a
reminder.9.  USING THE ACCESSORIESWARNING!
Refer to Safety chapters.9.1  Core temperature sensor
There are two temperatures to be set:
the oven temperature and the core
temperature.
The core temperature sensor measures
the core temperature of the meat. When the meat is at the set temperature, theappliance deactivates.
CAUTION!
Only use the core
temperature sensor supplied or the correct replacement
parts.The core temperature sensor
must stay in the meat and in
the socket during the
cooking.
1. Activate the appliance.
2. Put the tip of the core temperature
sensor into the centre of the meat.
www.aeg.com16                 
						

							3.Put the plug of the core temperature
sensor into the socket at the top of the cavity.
The display shows the core temperature
sensor symbol.
4. Press 
 or  in less than 5
seconds to set the core temperature.
5. Set the heating function and, if
necessary, the oven temperature.
The appliance calculates an approximate end time. The end time is different for
the different quantities of the food, the
set oven temperatures (minimum 120 °C)
and the operating modes. The appliance calculates the end time in approximately
30 minutes.
6. To change the core temperature,
press 
.
When the meat is at the set core
temperature, an acoustic signal sounds.
The appliance deactivates automatically.
7. Touch any symbol to stop the signal.
8. Remove the core temperature sensor
plug from the socket and remove the
meat from the oven.
WARNING!
The core temperature sensor
is hot. There is a risk of
burns. Be careful when you
remove the tip and the plug
of the core temperature
sensor.9.2  Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of the shelf support and make sure that the
feet point down.
Deep pan:
Push the deep pan between the guide bars of the shelf support.
Wire shelf and the deep pan together:
Push the deep pan between the guide bars of the shelf support and the wireshelf on the guide bars above and make
sure that the feet point down.
Small indentation at the top
increase safety. The
indentations are also anti-tip
devices. The high rim
around the shelf prevents
cookware from slipping of
the shelf.ENGLISH17          
						

							9.3 Telescopic RunnersKeep the installation
instructions for the
telescopic runners for future
use.
With telescopic runners you can put in
and remove the shelves more easily.
CAUTION!
Do not clean the telescopic
runners in the dishwasher.
Do not lubricate the
telescopic runners.
1. Pull out the right and left hand
telescopic runners.
2. Put the wire shelf on the telescopic
runners and carefully push them into
the appliance.
Make sure you push back the telescopic runners fully in the appliance before you
close the oven door.
9.4  Trivet and Grill- / Roasting
panWARNING!
Be careful when you remove
the accessories from a hot
appliance. There is a risk of
burns.
You can use the trivet to roast larger pieces of meat or poultry on one shelf
position.
1. Put the trivet into the deep pan so
that the supports of the wire shelf
point up.
2. Put the deep pan into the oven on
the necessary shelf position.
You can use the trivet to grill flat dishes
in large quantities and to toast.
1. Put the trivet into the deep pan so
that the supports of the wire shelf
point down.
2. Put the deep pan into the oven on
the necessary shelf position.
www.aeg.com18  °C °C     
						

							10. ADDITIONAL FUNCTIONS10.1  Favourites
You can save your favourite settings,
such as duration, temperature or heating function. They are available in the menu:
Favourites. You can save 20
programmes.Saving a programme
1. Activate the appliance.
2. Set a heating function or an
automatic programme.
3. Touch 
 again and again until the
display shows: SAVE.
4. Press 
 to confirm.
The display shows the first free memory
position.
5. Press 
 to confirm.
6. Enter the name of the programme.
The first letter flashes.
7. Touch 
 or  to change the
letter.
8. Press 
.
The next letter flashes.
9. Do step 7 again as necessary.
10. Press and hold 
 to save.
You can overwrite a memory position.
When the display shows the first free
memory position, touch 
 or  and
press 
 to overwrite an existing
programme.
You can change the name of a
programme in the menu: Edit
Programme Name.
Activating the programme
1. Activate the appliance.
2. Select the menu: Favourites.
3. Press 
 to confirm.
4. Select your favourite programme
name.
5. Press 
 to confirm.
Press 
 to go directly to menu:
Favourites. You can also use it when the
appliance is deactivated.
10.2  Using the Child Lock
When the Child Lock is on, the appliance
cannot be activated accidentally.If the Pyrolysis function
operates, the door locks
automatically.
A message comes on in the
display when you touch any
symbol.
1. Touch  to activate the display.
2. Touch 
 and  at the same time
until the display shows a message.
To deactivate the Child Lock function
repeat step 2.
10.3  Function Lock
This function prevents an accidental
change of the heating function. You can
activate it only when the appliance
operates.
1. Activate the appliance.
2. Set a heating function or setting.
3. Press 
 again and again until the
display shows: Function Lock.
4. Press 
 to confirm.
If the Pyrolysis function
operates, the door is locked
and the symbol of a key
comes on in the display.
To deactivate the function, press . The
display shows a message. Press 
 again
and then 
 to confirm.
When you deactivate the
appliance, the function also
deactivates.10.4  Set + Go
The function lets you set a heating
function (or a programme) and use it
later with one press of any symbol.
1. Activate the appliance.
2. Set a heating function.
ENGLISH19                         
						

							3.Press  again and again until the
display shows: Duration.
4. Set the time.
5. Press 
 again and again until the
display shows: Set + Go.
6. Press 
 to confirm.
Press any symbol (except for 
) to start
the function: Set + Go. The set heating
function starts.
When the heating function ends, an
acoustic signal sounds.
• Function Lock is on when the heating function
operates.
• The menu: Basic Settings lets you activate and
deactivate the function:
Set + Go.10.5  Automatic Switch-off
For safety reasons the appliance
deactivates automatically after some
time if a heating function operates and you do not change any settings.
Temperature (°C)Switch-off time (h)30 - 11512.5120 - 1958.5200 - 2455.5250 - maximum1.5The Automatic switch-off
does not work with the
functions: Light, core
temperature sensor, End
Time, Duration.10.6  Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the appliance is deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness: – when the appliance is activated.
– if you touch a symbol during the night brightness (apart from ON /OFF), the display goes back to
the day brightness mode for the
next 10 seconds.
– if the appliance is deactivated and you set the function: Minute
Minder. When the function ends,
the display goes back to the night
brightness.10.7  Cooling fan
When the appliance operates, the
cooling fan activates automatically to
keep the surfaces of the appliance cool.
If you deactivate the appliance, the
cooling fan can continue to operate until
the appliance cools down.
10.8  Safety thermostat
Incorrect operation of the appliance or
defective components can cause
dangerous overheating. To prevent this,
the oven has a safety thermostat which
interrupts the power supply. The oven
activates again automatically when the
temperature drops.
11.  HINTS AND TIPSWARNING!
Refer to Safety chapters.The temperature and baking
times in the tables are
guidelines only. They
depend on the recipes and
the quality and quantity of
the ingredients used.www.aeg.com20