AEG Lavamat 87680 User Manual

L 87680 FLEN User manual
 

CONTENTS
1.SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
2.TECHNICAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4
3.PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
4.ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

1.  SAFETY INFORMATION
Before the installation and use, read this
manual carefully:
• For your safety and the safety of your
property
• To help the environment
• For the correct operation of the appli-
ance.
Always keep these instructions with the
appliance also if you move or give it to a
different person.
The manufacturer is not responsible if an
incorrect installation and use causes
damage.
1.1 Children and vulnerable
person safety
• Do not let persons, children included,
with reduced physical...

• Do not install and connect a damaged
appliance.
• Make sure to remove all packaging
and transport bolts.
• Make sure that the mains plug is dis-
connected from the mains socket dur-
ing installation.
• Only a qualified person must do the
electrical installation, the plumbing
and the installation of the appliance.
This to prevent the risks of structural
damage or injury.
• Do not install or use the appliance
where the temperature is less than 0
°C.
• When you install the appliance on a
carpet floor,...

Water supply pressureMinimum0,5 bar (0,05 MPa)
Maximum8 bar (0,8 MPa)
Water supply 1) Cold water
Maximum loadCotton8 kg
Spin speedMaximum1600 rpm
1) 
Connect the water inlet hose to a water tap with a 3/4'' thread.
3. PRODUCT DESCRIPTION
12389
5
6
7
4
10
11
12
1Worktop
2Detergent dispenser
3Control panel
4Door handle
5Rating plate
6Drain pump
7Feet for the appliance level
8Water drain hose
9Water inlet valve
10Mains cable
11Transit bolts
12Feet for the appliance level
ENGLISH5
 

4. ACCESSORIES
12
34
1Spanner
To remove the transit bolts.
2Plastic caps
To close the holes on the rear side
of the cabinet after the removal of
the transit bolts.
3Anti-flood inlet hose
To prevent possible leakage
4Plastic hose guide
To connect the drain hose on the
edge of a sink.
5. CONTROL PANEL
g i t s a t i Hg
n i d n
i Vé l H / t k i e v KTímaval/ a t
t e l B
r u t t o v þ r o fAuka-
skolun
Ull/Silki
Aðalþvottur
Aðalþvottur
hljóðlátt
Straufrítt
Straulétt
Viðkvæmt
Vatt-teppi
Ofnæmisvörn
Vinding/...

6.1 AUTO Off button 1
Press this button to activate or deacti-
vate the appliance. A tune sounds when
the appliance is activated.
The AUTO OFF function automatically
deactivates the appliance to stop the en-
ergy consumption when:
• You do not use the appliance for 5 mi-
nutes before you press button 
4 .
– All settings are cancelled.
–
Press button 
1 to activate the ap-
pliance again.– Set again the washing programme
and all possible options.
• After 5 minutes from the end of the
washing programme....

The phase symbols
• When a programme is set, all the symbols of the phases related to
the programme come on.
• When the programme starts, only the symbol of the phase in oper-
ation flashes.
• When the programme is completed, the symbol of the last phase
is on.
DThe steam symbol comes on when you set a Steam pro-
gramme.
EThe detergent overdosing comes on at the end of the cy-
cle when the appliance detects too much detergent.
F
You cannot open the appliance door when the symbol is
on.
You can open the...

If you make a wrong selection the message Err indicates that the selec-
tion is not possible.
J
The time save symbol comes on when you set one of the
programme duration:
• Shortened duration
• Extra Quick
K
The extra rinse symbol comes on when this function is acti-
vated.
The value shows the total number of the rinses.
The indicator bar is fully filled when you set to the maxi-
mum number of rinses.
L
The Stain symbol comes on when you activate the function.
The Prewash symbol comes on when you activate...

when you have laundry with a high lev-
el of soil.
The set of this function increases
the programme duration.
6.9 Spin button 9
Press this button to:
• Decrease the maximum speed of the
spin phase of the programme.
The display shows only the spin
speeds available with the set
programme.
• Deactivate the spin phase.
• Activate the 'Rinse Hold' function. Set
this function to prevent fabric creases.
The appliance does not drain the wa-
ter when the programme is comple-
ted.
6.10 Temperature button...