AEG Lavamat 70260 Tl User Manual

Programme
TemperatureType of load
max. weight of loadCycle
descriptionFunctions
 
Spin / Drain4)
All fabrics
The maximum load of
the laundry is related
to the type of laundry.Drainage of the
water
Spin phase at the
maximum speed.SPIN REDUCTION
NO SPIN
Rinse
All fabrics.One rinse with ad-
ditive spin phaseSPIN REDUCTION
RINSE HOLD
EXTRA RINSE
5)
Curtains
40° - Cold
Set this programme
to wash curtains. It
adds automatically
the prewash phase to
clean the dust from
the curtains.
Do not put the deter-
gent...

4) 
The default phase of the spin speed is related to cotton items. Set the spin speed. Make
sure that it agrees with the laundry. To select the DRAIN programme only, set the function
NO SPIN.
5) 
Press EXTRA RINSE button to add rinses. With a low spin speed the appliance performs
delicate rinses and a short spin.
6) 
Set this programme to decrease the time and the consumption of energy and water.
7) 
Standard programmes for the Energy Label consumption values] according to regulation
1061/2010, the “ECO...

1) 
Refer to the display for the programme time.
2) 
The consumption information shown in this chart is indicative. It can vary depending on the
quantity and the type of laundry, on the temperature of the water supply and on the
ambient temperature.
3) 
This is the programme for test institutes. It agrees with EN60456.
BEFORE FIRST USE
Put a small quantity of detergent in the
main wash compartment of the detergent
dispenser. Set and start a programme forcotton at the highest temperature without
laundry....

USING THE DETERGENT AND ADDITIVES
The detergent compartment for the prewash phase.
The detergent compartment for the washing phase.
Liquid additives compartment (fabric conditioner, starch).
The mark 
M is the maximum level for the quantity liquid additives.
Always obey the instructions that
you find on the packaging of the
detergent products.
SETTING AND STARTING A PROGRAMME
1.Turn the programme knob. The rela-
ted programme indicator comes on.
2.The indicator of button 4 flashes
with red colour.
3.The...

2.Press button 4 , the appliance starts
the countdown of the delay start.
When the countdown is completed,
the programme starts automatically.
Before you press button 4 to
start the appliance, you can cancel
or change the set of the delay
start.
You cannot set the delay start with
the Steam programme.
CANCEL THE DELAY START
1.Press button 4 . The related indica-
tor flashes.
2.Press button 5 again and again until
the display shows 0’.
3.Press button 4 . The programme
starts.
OPEN THE LID
While a...

HELPFUL HINTS AND TIPS
THE LAUNDRY LOAD
• Divide the laundry in: white, coloured,
synthetics, delicates and wool.
• Obey the washing instructions that are
on the laundry care labels.
• Do not wash together white and col-
oured items.
• Some coloured items can discolour with
the first wash. We recommend that you
wash them separately for the first times.
• Button up pillowcases, close zippers,
hooks and poppers. Tie up belts.
• Empty the pockets and unfold the
items.
• Turn inside out multilayered...

Water hardness table
LevelTypeWater hardness
°dH°T.H.mmol/lClarke
1soft0-70-150-1.50-9
2medium8-1416-251.6-2.510-16
3hard15-2126-372.6-3.717-25
4very hard> 21> 37>3.7>25
ENGLISH17
 

CARE AND CLEANING
WARNING!
Disconnect the appliance from the mains
supply before you clean it.
DESCALING
The water we use contains limescale. If it
becomes necessary, use a water softener
to remove limescales.
Use a special product made for washing
machines. Obey the instructions that you
find on the packaging of the manufactur-
er.
Do this separately from the laundry wash.
EXTERNAL CLEANING
Clean the appliance only with soap and
warm water. Fully dry all the surfaces.
CAUTION!
Do not use alcohol,...

1.Open the drain filter door.
2.Put a container below the recess of
the drain filter to collect the water
that flows out. Turn the filter until it is
vertical.
3.Turn the filter fully and remove it.
4.Remove fluff and objects.
5.Clean the filter with water.
6.Put it back and screw it in.
7.Make sure that you tighten correctly
the filter to prevent leakages.
8.Close the drain filter door.
THE INLET HOSE FILTER AND
THE VALVE FILTER
WARNING!
• Disconnect the mains plug from
the mains socket.
To clean the...

4.Remove the inlet hose behind the
appliance.
5.Clean the filter in the valve with a stiff
brush or a towel.
90˚
6.Install again the inlet hose. Make sure
that the couplings are tight to pre-
vent leakages.
7.Open the water tap.
EMERGENCY DRAIN
Because of a malfunction, the appliance
cannot drain the water.
If this occurs, do steps (1) through (3) of
'To clean the drain filter'.
If necessary, clean the filter.
Put the drainage duct back and close the
drain filter flap.
FROST PRECAUTIONS
If the...