AEG Lavamat 60060 Tl User Manual

Programme
TemperatureType of load
max. weight of loadCycle
descriptionFunctions
Curtains
40° - Cold
Set this programme
to wash curtains. It
adds automatically
the prewash phase to
clean the dust from
the curtains.
Do not put the deter-
gent into the prewash
compartment.
max. 2,5 kgPrewash
Wash
Rinses
Short spinSPIN REDUCTION
RINSE HOLD
EXTRA RINSE
Jeans
60° - Cold
All items in jeans. Jer-
sey made items with
hi-tech materials.
max.3 kgWash
Rinses
Short spinSPIN REDUCTION
RINSE HOLD
EXTRA RINSE
TIME SAVE...

Programme1)Energy consump-
tion (KWh)2)Water consump-
tion (litre)2)
Spin0.05/
Drain0.01/
Rinse0.1035
Curtains 40°C0.6060
Jeans 60°C0.9055
20 min. 3 kg 30°C0.3550
Economy 90°C1.8055
Programmes for energy saving
Economy 60°C3)1.0252
Economy 40°C3)0.7055
The cotton 60 °C economy and cotton 40 °C economy are the standard
cotton programmes for normally soiled cotton laundry. They are suitable
to clean normally soiled cotton laundry and they are the most efficient
programmes in terms of combined energy and...

LOADING THE LAUNDRY
A
1.Open the lid of the appliance.
2.Push the button A (depending on
model). The drum opens automatical-
ly.
3.Put the laundry. Make sure to not put
too much laundry into the drum.
4.Close the drum and the lid of your
washing machine.
Before you close the lid of your
appliance, make sure that you
close the drum correctly.
FILLING THE DETERGENT AND ADDITIVES
The detergent compartment for the prewash phase.
The detergent compartment for the washing phase.
Liquid additives compartment...

SETTING AND STARTING A PROGRAMME
1.Turn the programme knob.
2.The indicator of button 4 flashes
with red colour.
3.The indicators of the default tempera-
ture and spin speed come on. To
change the temperature and/or the
spin speed, press the related buttons.
4.Set the available functions and the
delay start. When you press the rele-
vant button, the indicator of the set
function comes on or the display
shows the related symbol.
5.Press button 4 to start the pro-
gramme. The indicator of button 
4
is on...

AT THE END OF PROGRAMME
• The appliance stops automatically.
• The acoustic signals operate.
•
In the display 
 comes on.
• The indicator of the Start/Pause button
4 goes off.
• You can open the lid 2 minutes after
the appliance stops. The door lock sym-
bol goes off.
•
Press button 
1 to deactivate the ap-
pliance. After five minutes from the end
of the programme, the AUTO OFF
function automatically deactivates the
appliance.
When you activate the appliance
again, the display shows the end
of the last...

• Do not mix different types of deter-
gents.
• To help the environment, do not use
more than the correct quantity of deter-
gent.
• Obey the instructions that you find on
the on packaging of these products.
• Use the correct products for the type
and colour of the fabric, the pro-
gramme temperature and the level of
soil.
• If you use liquid detergents, do not set
the prewash phase.
• If your appliance has not the detergent
dispenser with the flap device, add the
liquid detergents with a dosing ball....

CARE AND CLEANING
WARNING!
Disconnect the appliance from the mains
supply before you clean it.
DESCALING
The water we use contains limescale. If it
becomes necessary, use a water softener
to remove limescales.
Use a special product made for washing
machines. Obey the instructions that you
find on the packaging of the manufactur-
er.
Do this separately from the laundry wash.
EXTERNAL CLEANING
Clean the appliance only with soap and
warm water. Fully dry all the surfaces.
CAUTION!
Do not use alcohol,...

1.Open the drain filter door.
2.Put a container below the recess of
the drain filter to collect the water
that flows out. Turn the filter until it is
vertical.
3.Turn the filter fully and remove it.
4.Remove fluff and objects.
5.Clean the filter with water.
6.Put it back and screw it in.
7.Make sure that you tighten correctly
the filter to prevent leakages.
8.Close the drain filter door.
THE INLET HOSE FILTER AND
THE VALVE FILTER
WARNING!
• Disconnect the mains plug from
the mains socket.
To clean the...

4.Remove the inlet hose behind the
appliance.
5.Clean the filter in the valve with a stiff
brush or a towel.
90˚
6.Install again the inlet hose. Make sure
that the couplings are tight to pre-
vent leakages.
7.Open the water tap.
EMERGENCY DRAIN
Because of a malfunction, the appliance
cannot drain the water.
If this occurs, do steps (1) through (3) of
'To clean the drain filter'.
If necessary, clean the filter.
Put the drainage duct back and close the
drain filter flap.
FROST PRECAUTIONS
If the...

TROUBLESHOOTING
The start of the appliance does not occur
or it stops during operation.
First try to find a solution to the problem
(refer to the table). If not, contact the serv-
ice centre.
With some problems, the acoustic
signals operate and the display shows
an alarm code:
•
 - The appliance does not fill with
water.•
 - The appliance does not drain
the water.
•
 - The appliance door is open or
not closed correctly.
•
 - The anti-flood device is on.
WARNING!
Deactivate the appliance before
you do the...