AEG Lavamat 48580 Information Manual

User information
11
Running a washing cycle
Loading the washing
•Lift the machine cover.
•Open the drum by pressing on the locking button A; the two
flaps automatically separate.
•Insert the washing, close the drum and the cover of your washing
machine.
Warning : before you close the cover of
your washing machine, make sure that the
drum door is properly closed :
•the two flaps latched together,
•the locking button A extended.
Proportioning of detergents 
Pour the powder detergent dose into the wash...

User information
12LINEN/EASY CARES12.45
Cycle end at14.37
50°C1000
Switching on the appliance/Selecting a programme
Select the programme using the
programme knob, e.g., LINEN 
/EASY CARES  .
By selecting a programme, you
switch the appliance on at the
same time.
– 
The display lights up and shows
the programme set, the current
time and the estimated end of
the cycle.
– 
Depending on the programme, the washing machine suggests a
temperature and a spin speed. You can change these suggestions.
– 
The...

User information
13
Setting options
Options can be added to a wash cycle that has already been selected.
Press the OPTION key . The display shows the symbols for the
options.
 Prewash
Pre-washes at about 30°C before the main wash cycle, which follows
automatically.
 Sensitive
Enhanced rinse action through an additional rinse cycle together with
decreased drum movement (improved fabric care). This is ideal when
frequent washes are necessary, for example, in cases of highly
sensitive skin.  An additional...

User information
14
Prewash, Sensitive, Stain, Night Cycle
1. Press the OPTION key 
repeatedly until the desired
symbol flashes, e. g., 
PREWASH. (with each press of
the key, the next symbol flashes,
from left to right)
2. Press the OK key. The symbol
stops flashing. A black bar
appears under the symbol. The
option is set. The display
changes to the next option.
To switch off the option, press
the OPTION key   repeatedly
until the symbol for the option
flashes and then press the OK
key. The black bar...

User information
15
Setting times
Shortened cycles and the delay of the start time can be set for a wash
cycle that has already been selected.  
Press the TIME key . The display shows the symbols for Time
Saving and Delay Start. 
 Time Saving : SHORT or VERY SHORT
Shortened wash cycle for lightly soiled washing. 
–SHORT: only possible  with the programmes  COTTONS/LINEN ,
EASY-CARES   and EASY  IRON .
–VERY SHORT: only possible  with the programmes COTTONS/LINEN
, EASY CARES , EASY IRON  and DELICATES ....

User information
16LINEN/EASY CARES12.45
Start in  4.00
50°C800
 
Delay Start
1. Press the TIME key   repeatedly, until the DELAY START symbol 
flashes.
2. Press the OK key. In the display, “Start in 0 min” is displayed.
3. Press the TIME key 
repeatedly, until the display shows
the desired period by which you
want to delay the start, e. g. “Start
in 4 h” (=4 hours). A black bar
appears under the  symbol.
 If 20 h is displayed and you
press the key again, the delayed
start is cancelled.
4. Press the OK...

User information
17
Starting a programme
1. Check that the water tap is open.
2. Press the START/PAUSE key  .
The programme is started or it starts after the time delay set has
elapsed.  
If after pressing the START/PAUSE key   the display shows
“Door not closed”, the door has not been shut properly. Push the door
firmly closed and press the START/PAUSE key  again.
Programme progress
The display indicates the stage of
the programme that is currently
being performed as well as the
time of the end of the...

User information
18
Adding washing
1. Press the START/PAUSE key .
•If “Door locked” and “Pause” are alternately shown in the display, it
is no longer possible to add washing, e. g. when the water level is
too high.
•If “Door unlocked” and “Pause” are alternately shown in the
display, it is still possible to add washing : 
2. Open the door.
3. Add washing and close the door again.
4. Press the START/PAUSE key  again. The programme continues.
Washing cycle complete / Removing the washing
At the end of the...

User information
19
Setup
The special functions that can be set under Setup remain permanently
stored independent of each washing cycle - even after the appliance
has been switched off or the main plug has been removed from the
socket.
Memory 1, 2, 3
Programme combinations can be stored at programme knob positions
MEMORY 1, 2, 3 and can then be selected directly using the
programme knob. To do this, the desired programme combination is
first put together and then stored. 
Setting the memory
Example:...

User information
20
programme combination (see “Changing the Memory”) but cannot be
deleted.  
Changing the Memory
1. Put together the new programme combination as required (for an
example, see “Setting the Memory”, steps 1 to 4).
2. Press the OPTION key   repeatedly, until the SETUP symbol 
flashes.
3. Press the OK key. 
4. Using the OPTION key   select the memory position to be
changed, e. g. MEMORY 1. 
5. Store the new programme combination using the OK key. 
Volume
The volume of the acoustic signal...