AEG L 64840 User Manual
Have a look at the manual AEG L 64840 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 513 AEG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
In the interest of the environment Washing machines should be con- nected to the FOUL drainage system, the water will then be taken to a sewage works for treatment before being discharged safely into a river. It is essential that these appliances are not connected to the surface water drainage system as this water is discharged directly into a river or stream and may cause pollution. If you require any further advice please contact your local water authority. Electrical connection WARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer does not accept any responsibility for damage or injury through failure to comply with the above safety precaution. If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate plug fitted. Remove the fuse from the cut off plug. The cut off plug should then be disposed of to prevent the hazard of shocks in case it should be plugged into a 13 Amp socket in another part of your home. Important The wires in the mains lead are coloured in accordance with the following code: Green and Yellow - Earth Blue - Neutral Brown - Live 41Installation 132964771.qxd 13/10/2008 15.22 Pagina 41
If you fit your own plug, the colours of the wires in the mains lead of your appli- ance may not correspond with the markings identifying the terminals in your plug, proceed as follows: Connect the green and yellow (earth) wire to the terminal in the plug which is marked with the letter «E» or the earth symbol or coloured green and yellow. Connect the blue (neutral) wire to the terminal in the plug which is marked with the letter «N» or coloured black. Connect the brown (live) wire to the terminal in the plug which is marked with the letter «L» or coloured red. The plug moulded on to the lead incorporates a fuse. For replacement, use a 13 Amp BS1363/A A fuse. Only ASTA or BSI approved fuses should be used. The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indi- cated by the coloured insert at the base of the plug. A replacement cover/carrier must be obtained from your local AEG/ELECTROLUX Service Centre. The power supply cable must be easily accessible after installing the machine. Should the appliance power supply cable need to be replaced, this MUST be carried out by a Service Centre. 42Installation 132964771.qxd 13/10/2008 15.22 Pagina 42
Environmental concerns Packaging materials The materials marked with the symbol are recyclable. >PEPSPP
www.electrolux.com 132 964 771-01-422008 Subject to change without notice www.aeg-electrolux.co.uk 132964771.qxd 13/10/2008 15.22 Pagina 44