AEG Integrated slimline dishwasher F78400VI0P User Manual

the indicators ,  and  start to
flash and the display is blank.
2. Press 
 .
• The indicators 
 and  go off.
• The indicator 
 continues to
flash.
• The display shows the current setting.
–
 = rinse aid dispenser
activated.
–
 = rinse aid dispenser
deactivated.
3. Press 
 to change the setting.
4. Press the on/off button to confirm
the setting.
6.4  Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic signals.
There is also an...

The washing results are the same as with
the normal programme duration. The drying results can decrease.How to activate TimeSaver
Press  TimeSaver , the related indicator
comes on.
If the option is not applicable to the
programme, the related indicator does
not come on or it flashes quickly for a
few seconds and then goes off.
The display shows the updated
programme duration.8.  BEFORE FIRST USE1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not,...

8.2 How to fill the rinse aid
dispenserCAUTION!
Only use rinse aid
specifically designed for dishwashers.
1. Press the release button ( D) to open
the lid ( C).
2. Pour the rinse aid in the dispenser ( A)
until the liquid reaches the fill level
'max'.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4. Close the lid. Make sure that the
release button locks into position.
You can turn the selector of
the released quantity ( B)
between position 1 (lowest
quantity)...

1.Press the release button ( B) to open
the lid ( C).
2. Put the detergent, in powder or
tablets, in the compartment ( A).
3. If the programme has a prewash
phase, put a small quantity of
detergent in the compartment ( D).
4. Close the lid. Make sure that the
release button locks into position.
9.2  Setting and starting a
programmeThe Auto Off function
This function decreases energy
consumption by deactivating
automatically the appliance when it is not
operating.
The function comes into operation:
• 5...

End of the programme
When the programme is completed the display shows 0:00 .
1. Press the on/off button or wait for
the Auto Off function toautomatically deactivate the
appliance.
2. Close the water tap.10.  HINTS AND TIPS10.1  General
The following hints will ensure optimal
cleaning and drying results in daily use
and also help to protect the
environment.
• Remove larger residues of food from the dishes into the waste bin.
• Do not pre-rinse dishes by hand. When needed, use the prewash
programme (if...

• Do not put in the appliance items thatcan absorb water (sponges,
household cloths).
• Remove remaining food from the items.
• Make soft the remaining burned food on the items.
• Put hollow items (cups, glasses and pans) with the opening down.
• Make sure that cutlery and dishes do not bond together. Mix spoons withother cutlery.
• Make sure that glasses do not touch other glasses.
• Put small items in the cutlery basket. • Put light items in the upper basket. Make sure that the items do not
move.
•...

2.Remove the filter ( C) out of filter ( B). 
3. Remove the flat filter ( A).
4. Wash the filters.
5.Make sure that there are no residues
of food or soil in or around the edge
of the sump.
6. Put back in place the flat filter ( A).
Make sure that it is correctly
positioned under the 2 guides.
7. Reassemble the filters ( B) and ( C).
8. Put back the filter ( B) in the flat filter
( A ). Turn it clockwise until it locks.
CAUTION!
An incorrect position of the
filters can cause bad
washing results and...

• If you regularly use short durationprogrammes, these can leave
deposits of grease and limescale
inside the appliance. To prevent this,
we recommend to run long duration
programmes at least 2 times per month.• To maintain the performance of your appliance at its best, we recommend
to use monthly a specific cleaning
product for dishwashers. Follow
carefully the instructions on the
packaging of the product.12.  TROUBLESHOOTINGIf the appliance does not start or it stops
during operation. Before you contact...

Problem and alarm codePossible cause and solutionThe appliance stops and
starts more times during op-
eration.• It is normal. It provides optimal cleaning results and en- ergy savings.The program lasts too long.• Select the TimeSaver option to shorten the program time.
• If the delayed start option is set, cancel the delay setting or wait for the end of the countdown.The remaining time in the
display increases and skips
nearly to the end of program
time.• This is not a defect. The appliance is working...

12.1 The washing and drying results are not satisfactoryProblemPossible cause and solutionPoor washing results.• Refer to  "Daily use" , "Hints and tips"  and basket
loading leaflet.
• Use more intensive washing programmes.
• If you use multi-tablets, always switch on the option Multitab.
• Clean spray arm jets and filter. Refer to  "Care and
Cleaning" .Poor drying results.• Tableware has been left for too long inside a closed
appliance.
• There is no rinse aid or the dosage of...