AEG Integrated slimline dishwasher F55412VI0 User Manual

7. OPTIONSDesired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.Not all options are
compatible with each other.
If you have selected non
compatible options, the
appliance will automatically
deactivate one or more of
them. Only the indicators of
the options still active will
stay on.7.1  Multitab
Activate this option when you use multi-
tablets that integrate the salt, rinse aid
and detergent functions....

5.Turn the cap of the salt container
clockwise to close the salt container.
Water and salt can come out
from the salt container when
you fill it. Risk of corrosion.
To prevent it, after you fill
the salt container, start a
programme.8.2  How to fill the rinse aid
dispenserCAUTION!
Only use rinse aid
specifically designed for dishwashers.
1. Press the release button ( D) to open
the lid ( C).
2. Pour the rinse aid in the dispenser ( A)
until the liquid reaches the fill level
'max'.
3. Remove the...

1.Press the release button ( B) to open
the lid ( C).
2. Put the detergent, in powder or
tablets, in the compartment ( A).
3. If the programme has a prewash
phase, put a small quantity of
detergent in the compartment ( D).
4. Close the lid. Make sure that the
release button locks into position.
9.2  Setting and starting a
programmeThe Auto Off function
This function decreases energy
consumption by deactivating
automatically the appliance when it is not
operating.
The function comes into operation:
• 5...

End of the programme
When the programme is completed the display shows 0:00 .
1. Press the on/off button or wait for
the Auto Off function toautomatically deactivate the
appliance.
2. Close the water tap.10.  HINTS AND TIPS10.1  General
The following hints will ensure optimal
cleaning and drying results in daily use
and also help to protect the
environment.
• Remove larger residues of food from the dishes into the waste bin.
• Do not pre-rinse dishes by hand. When needed, use the prewash
programme (if...

• Do not put in the appliance items thatcan absorb water (sponges,
household cloths).
• Remove remaining food from the items.
• Make soft the remaining burned food on the items.
• Put hollow items (cups, glasses and pans) with the opening down.
• Make sure that cutlery and dishes do not bond together. Mix spoons withother cutlery.
• Make sure that glasses do not touch other glasses.
• Put small items in the cutlery basket. • Put light items in the upper basket. Make sure that the items do not
move.
•...

2.Remove the filter ( C) out of filter ( B). 
3. Remove the flat filter ( A).
4. Wash the filters.
5.Make sure that there are no residues
of food or soil in or around the edge
of the sump.
6. Put back in place the flat filter ( A).
Make sure that it is correctly
positioned under the 2 guides.
7. Reassemble the filters ( B) and ( C).
8. Put back the filter ( B) in the flat filter
( A ). Turn it clockwise until it locks.
CAUTION!
An incorrect position of the
filters can cause bad
washing results and...

• If you regularly use short durationprogrammes, these can leave
deposits of grease and limescale
inside the appliance. To prevent this,
we recommend to run long duration
programmes at least 2 times per month.• To maintain the performance of your appliance at its best, we recommend
to use monthly a specific cleaning
product for dishwashers. Follow
carefully the instructions on the
packaging of the product.12.  TROUBLESHOOTINGIf the appliance does not start or it stops
during operation. Before you contact...

Problem and alarm codePossible cause and solutionThe appliance stops and
starts more times during op-
eration.• It is normal. It provides optimal cleaning results and en- ergy savings.The program lasts too long.• If the delayed start option is set, cancel the delay settingor wait for the end of the countdown.The remaining time in the
display increases and skips
nearly to the end of program
time.• This is not a defect. The appliance is working correctly.Small leak from the appli-
ance door.• The appliance...

ProblemPossible cause and solutionPoor drying results.• Tableware has been left for too long inside a closedappliance.
• There is no rinse aid or the dosage of rinse aid is not enough. Set the rinse aid dispenser to a higher level.
• Plastic items may need to be towel dried.
• We recommend to always use rinse aid, even in com- bination with multi-tablets.There are whitish streaks or
bluish layers on glasses and
dishes.• The release quantity of rinse aid is too much. Adjust the rinse aid level to a lower...

ProblemPossible cause and solutionDull, discoloured or chipped
tableware.• Make sure that only dishwasher-safe items are washed in the appliance.
• Load and unload the basket carefully. Refer to basket loading leaflet.
• Place delicate items in the upper basket.Refer to  "Before first use" , 
"Daily use"  or "Hints and
tips"  for other possible
causes.13.  TECHNICAL INFORMATIONDimensionsWidth / height / depth (mm)446 / 818 - 898 / 550Electrical connection 1)Voltage (V)220 -...