AEG Integrated refrigerator SKZ81800C0 User Manual
Have a look at the manual AEG Integrated refrigerator SKZ81800C0 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 513 AEG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
6. HINTS AND TIPS6.1 Normal operating sounds The following sounds are normal during operation: • A faint gurgling and bubbling sound from coils sound when refrigerant is pumped. • A whirring and pulsating sound from the compressor when refrigerant ispumped. • A sudden cracking noise from inside appliance caused by thermic dilatation (a natural and not dangerous physical phenomenon). • A faint click noise from the temperature regulator when the compressor switches on or off.6.2 Hints for energy saving • Do not open the door frequently or leave it open longer than absolutelynecessary. 6.3 Hints for fresh food refrigeration To obtain the best performance: • do not store warm food or evaporating liquids in the refrigerator • do cover or wrap the food, particularly if it has a strong flavour • position food so that air can circulate freely around it6.4 Hints for refrigeration Useful hints: • Meat (all types): wrap in a suitable packaging and place it on the glass shelf above the vegetable drawer. Store meat for at most 1-2 days. • Cooked foods, cold dishes: cover and place on any shelf. • Fruit and vegetables: clean thoroughly and place in a special drawer. Bananas, potatoes, onions and garlic must not be kept in the refrigerator if not packed. • Butter and cheese: place in a special airtight container or wrap in an aluminium foil or a polythene bag to exclude as much air as possible. • Bottles: close with a cap and place on the door bottle shelf, or (if available) on the bottle rack. 7. CARE AND CLEANINGWARNING! Refer to Safety chapters.7.1 General warningsCAUTION! Unplug the appliance before carrying out any maintenance operation.This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorized technicians.The accessories and parts of the appliance are not suitable for washing in a dishwasher.7.2 Periodic cleaningCAUTION! Do not pull, move or damage any pipes and/or cables inside the cabinet.CAUTION! Take care of not to damage the cooling system.ENGLISH11
CAUTION! When moving the cabinet, lift it by the front edge to avoid scratching the floor. The equipment has to be cleaned regularly: 1. Clean the inside and accessories with lukewarm water and some neutral soap. 2. Regularly check the door seals and wipe clean to ensure they are clean and free from debris. 3. Rinse and dry thoroughly. 4. If accessible, clean the condenser and the compressor at the back of the appliance with a brush. This operation will improve the performance of the appliance and save electricity consumption. The lowest shelf, dividing the cooler compartment from the compartment can be removed only for cleaning. To remove pull out the shelf straight. To make sure fully functionality of the LongFresh compartment the lowest shelf and cover plates must be put back in their original position after cleaning.The cover plates above the drawers in the compartment can be taken out for cleaning.7.3 Defrosting of the refrigerator Defrosting of the fridge compartment is automatic. The water that forms flows into a recipient on the compressor andevaporates. The recipient cannot be removed. 7.4 Periods of non-operation When the appliance is not in use for long periods, take the following precautions: 1. Disconnect the appliance from electricity supply. 2. Remove all food. 3. Clean the appliance and all accessories. 4. Leave the door/doors open to prevent unpleasant smells. WARNING! If you want to keep the appliance switched on, ask somebody to check it once in a while to prevent the food inside from spoiling in case of a power failure.8. TROUBLESHOOTINGWARNING! Refer to Safety chapters.8.1 What to do if...ProblemPossible causeSolutionThe appliance does not op- erate.The appliance is switched off.Switch on the appliance. The mains plug is not con- nected to the mains socket correctly.Connect the mains plug to the mains socket correctly. There is no voltage in the mains socket.Connect a different electrical appliance to the mains socket. Contact a qualified electrician.www.aeg.com12
ProblemPossible causeSolutionThe appliance is noisy.The appliance is not sup- ported properly.Check if the appliance stands stable.Audible or visual alarm is on.The cabinet has been re- cently switched on or the temperature is still too high.Refer to "Door open alarm"or "High temperature alarm".The temperature in the ap- pliance is too high.Refer to "Door open alarm"or "High temperature alarm".The door is left open.Close the door.The temperature in the ap- pliance is too high.Contact a qualified electrician or contact the nearest Author- ised Service Centre.A rectangular symbol is shown instead of numbers on the Temperature Display.Temperature sensor prob- lem.Contact the nearest Author- ised Service Centre (the cool- ing system will continue to keep food products cold, but temperature adjustment will not be possible).The lamp does not work.The lamp is in stand-by.Close and open the door.The lamp does not work.The lamp is defective.Contact the nearest Author- ised Service Centre.The compressor operates continually.Temperature is set incor- rectly.Refer to "Operation". Many food products were put in at the same time.Wait some hours and then check the temperature again. The room temperature is too high.Refer to climate class chart on the rating plate. Food products placed in the appliance were too warm.Allow food products to cool to room temperature before stor- ing.The door is not closed cor- rectly.Refer to "Closing the door".The COOLMATIC is switched on.Refer to "COOLMATIC func- tion".The compressor does not start immediately after pressing the COOLMATIC, or after changing the tem- perature.This is normal, no error has occurred.The compressor starts after a period of time.ENGLISH13
ProblemPossible causeSolutionWater flows inside the refrig- erator.The water outlet is clog- ged.Clean the water outlet.Food products prevent that water flows into the water collector.Make sure that food products do not touch the rear plate.Water flows on the floor.The melting water outlet is not connected to the evaporative tray above the compressor.Attach the melting water out- let to the evaporative tray.Temperature cannot be set.The FROSTMATIC or COOLMATIC function is switched on.Switch off FROSTMATIC or COOLMATIC manually, or wait until the function resets auto- matically to set the tempera- ture. Refer to "FROSTMATIC or COOLMATIC function".dEMo appears on the dis- play.The appliance is in demon- stration mode.Keep the OK pressed for ap- proximately 10 seconds until a long sound is heard and dis- play shuts off for a short time.The temperature in the ap- pliance is too low/too high.The temperature regulator is not set correctly.Set a higher/lower tempera- ture.The door is not closed cor- rectly.Refer to "Closing the door".The food products' tem- perature is too high.Let the food products temper- ature decrease to room tem- perature before storage.Many food products are stored at the same time.Store less food products at the same time.The door has been opened often.Open the door only if necessa- ry.There is no cold air circula- tion in the appliance.Make sure that there is cold air circulation in the appliance.If the advice does not lead to the desired result, contact the nearest Authorised Service Centre.8.2 Replacing the lamp The appliance is equipped with a longlife LED interior light. Only service is allowed to replace the lighting device. Contact your Authorised Service Centre.8.3 Closing the door 1.Clean the door gaskets. 2. If necessary, adjust the door. Refer to "Installation". 3. If necessary, replace the defective door gaskets. Contact the Authorised Service Centre. www.aeg.com14
9. INSTALLATION9.1 Positioning Install the appliance in a dry, well ventilated indoors where the ambient temperature corresponds to the climateclass indicated on the rating plate of the appliance.Climate classAmbient temperatureSN+10°C to + 32°CN+16°C to + 32°CST+16°C to + 38°CT+16°C to + 43°CSome functional problems might occur for some types of models when operating outside of that range. The correct operation can only be guaranteed within the specified temperature range. If you have any doubts regarding where to install the appliance, please turn to the vendor, to our customer service or to the nearest Authorised Service Centre.9.2 Electrical connection • Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply. • The appliance must be earthed. The power supply cable plug is providedwith a contact for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a qualified electrician. • The manufacturer declines all responsibility if the above safety precautions are not observed. • This appliance complies with the E.E.C. Directives.9.3 Ventilation requirements The airflow behind the appliance must be sufficient. CAUTION! Refer to the assembly instructions for the installation.10. NOISES There are some sounds during normal running (compressor, refrigerant circulation). ENGLISH15 5 cmmin. 200 cm2 min. 200 cm 2
www.aeg.com16BRRR! HISSS! CLICK! BLUBB! CRACK! SSSRR R! OK CLICK!CLICK!SSSRRR!SSSRRR! BRRR!BRRR!HISSS!HISSS! BLUBB!BLUBB!CRACK!CRACK!
11. TECHNICAL INFORMATION11.1 Technical data Dimensions of the recess Heightmm1780Widthmm560Depthmm550VoltageVolts230 - 240FrequencyHz50The technical information is situated in the rating plate, on the external orinternal side of the appliance and in the energy label.12. ENVIRONMENT CONCERNSPlease recycle all materials marked with the symbol . Dispose of all packaging materials appropriately and help to protect the environment, and future generations. Do not dispose of electrical equipment marked with the symbol along with the general house hold waste. Dispose all electrical goods via applicable local authority collections, or at local authority or, commercial recycling centres. * ENGLISH17