AEG Integrated dishwasher F66602VI0P User Manual
Here you can view all the pages of manual AEG Integrated dishwasher F66602VI0P User Manual. The AEG manuals for Dishwasher are available online for free. You can easily download all the documents as PDF.
Page 11
7. OPTIONSDesired options must be activated every time before you start a programme. It is not possible to activate or deactivate options while a programme is running.Not all options are compatible with each other. If you have selected non compatible options, the appliance will automatically deactivate one or more of them. Only the indicators of the options still active will stay on.7.1 Multitab Activate this option when you use multi- tablets that integrate the salt, rinse aid and detergent functions....
Page 12
When you start a programme, the appliance can take up to 5 minutes to recharge the resin in the water softener. It seems that the appliance is not working. The washing phase starts only after this procedure is completed. The procedure will be repeated periodically.8.1 The salt containerCAUTION! Only use salt specifically designed for dishwashers. The salt is used to recharge the resin in the water softener and to assure good washing results in the daily use. How to fill the salt container 1. Turn the...
Page 13
4.Add the detergent. If you use multi- tablets, activate the option Multitab. 5. Set and start the correct programme for the type of load and the degree of soil.9.1 Using the detergentCAUTION! Only use detergent specifically designed for dishwashers. 1. Press the release button ( A) to open the lid ( C). 2. Put the detergent, in powder or tablets, in the compartment ( B). 3. If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door. 4. Close the lid....
Page 14
Cancelling the delay start while the countdown operates When you cancel the delay start you have to set the programme and options again. Press and hold RESET until the appliance is in programme selection mode.Cancelling the programme Press and hold RESET until the appliance is in programme selection mode. Make sure that there is detergent in the detergent dispenser before you start a new programme.End of programme When the programme is completed and you open the door, the appliance is automatically...
Page 15
3.Start the shortest programme with a rinsing phase. Do not add detergent and do not load the baskets. 4. When the programme is completed, adjust the water softener according to the water hardness in your area. 5. Adjust the released quantity of rinse aid.10.4 Loading the baskets • Only use the appliance to wash items that are dishwasher-safe. • Do not put in the appliance items made of wood, horn, aluminium, pewter and copper. • Do not put in the appliance items that can absorb water (sponges,...
Page 16
2.Remove the filter ( C) out of filter ( B). 3. Remove the flat filter ( A). 4. Wash the filters. 5.Make sure that there are no residues of food or soil in or around the edge of the sump. 6. Put back in place the flat filter ( A). Make sure that it is correctly positioned under the 2 guides. 7. Reassemble the filters ( B) and ( C). 8. Put back the filter ( B) in the flat filter ( A ). Turn it clockwise until it locks. CAUTION! An incorrect position of the filters can cause bad washing results and...
Page 17
• If you regularly use short durationprogrammes, these can leave deposits of grease and limescale inside the appliance. To prevent this,we recommend to run long duration programmes at least 2 times per month.12. TROUBLESHOOTINGIf the appliance does not start or it stops during operation. Before you contact an Authorised Service Centre, check if you can solve the problem by yourself with the help of the information in the table.With some problems, the display shows an alarm code.Problem and alarm...
Page 18
12.1 The washing and drying results are not satisfactoryProblemPossible solutionThere are whitish streaks or bluish layers on glasses and dishes.• The release quantity of rinse aid is too much. Adjust the rinse aid selector to a lower position. • The quantity of detergent is too much.There are stains and dry water drops on glasses and dishes.• The released quantity of rinse aid is not sufficient. Ad- just the rinse aid selector to a higher position. • The quality of the rinse aid can be the cause.The...