AEG Integrated dishwasher F55322VI0 User Manual

7.2 TimeSaver
This option increases the pressure and the temperature of the water. The
washing and the drying phases are
shorter.
The total programme duration decreases
by approximately 50%.
The washing results are the same as with
the normal programme duration. The
drying results can decrease.How to activate TimeSaver
Press  TimeSaver , the related indicator
comes on. 
If the option is not applicable to the
programme, the related indicator does
not come on or it flashes quickly for a few seconds and...

8.2 How to fill the rinse aid
dispenserCAUTION!
Only use rinse aid
specifically designed for dishwashers.
1. Press the release button ( D) to open
the lid ( C).
2. Pour the rinse aid in the dispenser ( A)
until the liquid reaches the fill level
'max'.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4. Close the lid. Make sure that the
release button locks into position.
You can turn the selector of
the released quantity ( B)
between position 1 (lowest
quantity)...

1.Press the release button ( B) to open
the lid ( C).
2. Put the detergent, in powder or
tablets, in the compartment ( A).
3. If the programme has a prewash
phase, put a small quantity of
detergent in the compartment ( D).
4. Close the lid. Make sure that the
release button locks into position.
9.2  Setting and starting a
programmeThe AUTO OFF function
This function decreases energy
consumption by deactivating
automatically the appliance when it is not
operating.
The function comes into operation: • 5...

automatically deactivate the
appliance.2. Close the water tap.10.  HINTS AND TIPS10.1  General
The following hints will ensure optimal
cleaning and drying results in daily use
and also help to protect the
environment.
• Remove larger residues of food from the dishes into the waste bin.
• Do not pre-rinse dishes by hand. When needed, use the prewash
programme (if available) or select a
programme with a prewash phase.
• Always use the whole space of the baskets.
• When loading the appliance, make sure that...

• Make sure that cutlery and dishes donot bond together. Mix spoons withother cutlery.
• Make sure that glasses do not touch other glasses.
• Put small items in the cutlery basket.
• Put light items in the upper basket. Make sure that the items do not
move.
• Make sure that the spray arm can move freely before you start a
programme.10.5  Before starting a
programme
Make sure that:
• The filters are clean and correctly installed.
• The cap of the salt container is tight. • The spray arms are not clogged....

2.Remove the filter ( C) out of filter ( B). 
3. Remove the flat filter ( A).
4. Wash the filters.
5.Make sure that there are no residues
of food or soil in or around the edge
of the sump.
6. Put back in place the flat filter ( A).
Make sure that it is correctly
positioned under the 2 guides.
7. Reassemble the filters ( B) and ( C).
8. Put back the filter (
B) in the flat filter
( A ). Turn it clockwise until it locks.CAUTION!
An incorrect position of the
filters can cause bad
washing results and damage...

12. TROUBLESHOOTINGIf the appliance does not start or it stops
during operation. Before you contact an
Authorised Service Centre, check if you
can solve the problem by yourself with
the help of the information in the table.WARNING!
Repairs not properly done
may result in serious risk to
the safety of the user. Any
repairs must be performed
by qualified personnel.With some problems, the display
shows an alarm code.
The majority of problems that can occur can be solved without the need
to contact an...

Problem and alarm codePossible cause and solutionThe program lasts too long.• Select the time-saving option to shorten the programtime (if applicable).
• If the delayed start option is set, cancel the delay setting or wait for the end of the countdown.The remaining time in the
display increases and skips
nearly to the end of program
time.• This is not a defect. The appliance is working correctly.Small leak from the appli-
ance door.• The appliance is not level. Loosen or tighten the adjust- able feet (if...

ProblemPossible cause and solutionPoor drying results.• Tableware has been left for too long inside a closedappliance.
• There is no rinse aid or the dosage of rinse aid is not enough. Set the rinse aid dispenser to a higher level.
• Plastic items may need to be towel dried.There are whitish streaks or
bluish layers on glasses and
dishes.• The release quantity of rinse aid is too much. Adjust the rinse aid selector to a lower position.
• The quantity of detergent is too much.There are stains and dry...

Refer to "Before first use" , 
"Daily use"  or "Hints and
tips"  for other possible
causes.13.  TECHNICAL INFORMATIONDimensionsWidth / height / depth (mm)596 / 818-898 / 555Electrical connection 1)Voltage (V)220 - 240Frequency (Hz)50Water supply pressureMin. / max. bar (MPa)0.5 (0.05) / 8 (0.8)Water supplyCold water or hot water 2)max 60 °CCapacityPlace settings13Power consumptionLeft-on mode (W)0.99Power consumptionOff-mode (W)0.101) 
Refer to the rating plate for other values....