AEG Integrated dishwasher F50513VI0 User Manual

7.1 ExtraHygiene
With this option you have better hygiene results. During the last rinsing phase, the
temperature stays at 70 °C for at least 10
minutes.How to activate ExtraHygiene
Press , the related indicator comes on
If the option is not applicable to the
programme, the related indicator does not come on or it flashes quickly for afew seconds and then goes off.
The display shows the updated
programme duration.
7.2  XtraDry
Activate this option when you want to
boost the drying performance. With the...

5.Turn the cap of the salt container
clockwise to close the salt container.CAUTION!
Water and salt can come out of the salt container when
you fill it. After you fill the
salt container, immediately
start a programme to
prevent corrosion.8.2  How to fill the rinse aid
dispenserCAUTION!
Only use rinse aid
specifically designed for dishwashers.
1. Press the release button ( D) to open
the lid ( C).
2. Pour the rinse aid in the dispenser ( A)
until the liquid reaches the fill level
'max'.
3. Remove...

9.1 Using the detergent
1.Press the release button ( B) to open
the lid ( C).
2. Put the detergent, in powder or
tablets, in the compartment ( A).
3. If the programme has a prewash
phase, put a small quantity of
detergent in the compartment ( D).
4. Close the lid. Make sure that the
release button locks into position.
9.2  Setting and starting a
programmeThe Auto Off function
This function decreases energy
consumption by deactivating
automatically the appliance when it is not
operating.
The function...

Cancelling the delay start while
the countdown operates
When you cancel the delay start you
have to set the programme and options
again.
Press and hold  Reset until the appliance
is in programme selection mode.Cancelling the programme
Press and hold  Reset until the appliance
is in programme selection mode.
Make sure that there is detergent in the detergent dispenser before you start anew programme.End of the programme
When the programme is completed the
display shows 0:00 .
1. Press the on/off button or...

6.Activate the rinse aid empty
notification.10.4  Loading the baskets
• Only use the appliance to wash items
that are dishwasher-safe.
• Do not put in the appliance items made of wood, horn, aluminium,
pewter and copper.
• Do not put in the appliance items that can absorb water (sponges,
household cloths).
• Remove remaining food from the items.
• Make soft the remaining burned food on the items.
• Put hollow items (cups, glasses and pans) with the opening down.
• Make sure that cutlery and dishes do not...

2.Remove the filter ( C) out of filter ( B). 
3. Remove the flat filter ( A).
4. Wash the filters.
5.Make sure that there are no residues
of food or soil in or around the edge
of the sump.
6. Put back in place the flat filter ( A).
Make sure that it is correctly
positioned under the 2 guides.
7. Reassemble the filters ( B) and ( C).
8. Put back the filter ( B) in the flat filter
( A ). Turn it clockwise until it locks.
CAUTION!
An incorrect position of the
filters can cause bad
washing results and...

• To maintain the performance of yourappliance at its best, we recommendto use monthly a specific cleaning
product for dishwashers. Followcarefully the instructions on the
packaging of the product.12.  TROUBLESHOOTINGIf the appliance does not start or it stops
during operation. Before you contact an Authorised Service Centre, check if youcan solve the problem by yourself with
the help of the information in the table.WARNING!
Repairs not properly done
may result in serious risk to
the safety of the user....

Problem and alarm codePossible cause and solutionThe appliance stops and
starts more times during op-
eration.• It is normal. It provides optimal cleaning results and en- ergy savings.The program lasts too long.• If the delayed start option is set, cancel the delay settingor wait for the end of the countdown.The remaining time in the
display increases and skips
nearly to the end of program
time.• This is not a defect. The appliance is working correctly.Small leak from the appli-
ance door.• The appliance...

ProblemPossible cause and solutionPoor drying results.• Tableware has been left for too long inside a closedappliance.
• There is no rinse aid or the dosage of rinse aid is not enough. Set the rinse aid dispenser to a higher level.
• Plastic items may need to be towel dried.
• For the best drying performance activate the option XtraDry.
• We recommend to always use rinse aid, even in com- bination with multi-tablets.There are whitish streaks or
bluish layers on glasses and
dishes.• The release quantity...

ProblemPossible cause and solutionLimescale deposits on the ta-
bleware, on the tub and on
the inside of the door.• The level of salt is low, check the refill indicator.
• The cap of the salt container is loose. • Your tap water is hard. Refer to  "The water softener".
• Even using multi-functional tabs use salt and set re- generation of the water softener. Refer to  "The water
softener" .
• If lime scale deposits still remain, clean the appliance with appliance cleaners which are...