AEG Integrated dishwasher F45700VI0P User Manual

inside the appliance. Do not use
detergent and do not load the
baskets.
When you start a programme, the
appliance can take up to 5 minutes to recharge the resin in the water softener.It seems that the appliance is not
working. The washing phase starts only
after this procedure is completed. The
procedure will be repeated periodically.8.1  How to fill the salt
container
1. Turn the cap of the salt container
counterclockwise and remove it.
2. Put 1 litre of water in the salt
container (Only for the first...

2.Press the on/off button to activate
the appliance.
Make sure that the appliance is in programme selection mode. • If the salt indicator is on, fill thesalt container.
• If the rinse aid indicator is on, fill the rinse aid dispenser.
3. Load the baskets.
4. Set and start the correct programme
for the type of load and the degree
of soil.9.1  Using the detergentCAUTION!
Only use detergent specifically designed for
dishwashers.
1. Press the release button ( A) to open
the lid ( C).
2. Put the detergent, in...

Cancelling the delay start while
the countdown operates
When you cancel the delay start you
have to set the programme and options
again.
Press and hold simultaneously 
 and
 until the appliance is in
programme selection mode.
Cancelling the programme
Press and hold simultaneously  and
 until the appliance is in
programme selection mode.
Make sure that there is detergent in the
detergent dispenser before you start anew programme.End of programme
When the programme is completed andyou open the door, the...

2.Make sure that the salt and rinse aid
containers are full.
3. Start the shortest programme with a
rinsing phase. Do not add detergent
and do not load the baskets.
4. When the programme is completed,
adjust the water softener according to the water hardness in your area.
5. Adjust the released quantity of rinse
aid.
6. Activate the rinse aid empty
notification.10.4  Loading the baskets
• Only use the appliance to wash items
that are dishwasher-safe.
• Do not put in the appliance items made of wood,...

1.Turn the filter ( B) counterclockwise
and remove it.
2. Remove the filter ( C) out of filter ( B). 
3. Remove the flat filter ( A).
4. Wash the filters.
5.Make sure that there are no residues
of food or soil in or around the edge
of the sump.
6. Put back in place the flat filter ( A).
Make sure that it is correctly
positioned under the 2 guides.
7. Reassemble the filters ( B) and ( C).
8. Put back the filter ( B) in the flat filter
( A ). Turn it clockwise until it locks.
CAUTION!
An incorrect position...

3.Wash the spray arm under running
water. Use a thin pointed tool, e.g.
toothpick, to remove particles of soil
from the holes.
4. To engage again the spray arm to
the basket, press the spray arm
upwards in the direction indicated by the lower arrow and simultaneouslyturn it counterclockwise until it locks
into place.
11.3  External cleaning
• Clean the appliance with a moist soft cloth.
• Only use neutral detergents.
• Do not use abrasive products, abrasive cleaning pads or solvents.11.4  Internal...

WARNING!
Repairs not properly done
may result in serious risk to
the safety of the user. Any
repairs must be performed
by qualified personnel.
With some problems the end indicator flashes intermittently indicating a
malfunction.
The majority of problems that can
occur can be solved without the need
to contact an Authorised Service
Centre.Problem and alarm codePossible cause and solutionYou cannot activate the appliance.• Make sure that the mains plug is connected to
the mains socket.
• Make sure that...

Problem and alarm codePossible cause and solutionThe program lasts too long.• If the delayed start option is set, cancel the de-lay setting or wait for the end of the count-
down.Small leak from the appliance door.• The appliance is not levelled. Loosen or tight- en the adjustable feet (if applicable).
• The appliance door is not centred on the tub. Adjust the rear foot (if applicable).The appliance door is difficult to
close.• The appliance is not levelled. Loosen or tight- en the adjustable feet (if...

ProblemPossible cause and solutionPoor drying results.• Tableware has been left for too long inside a closedappliance.
• There is no rinse aid or the dosage of rinse aid is not enough. Set the rinse aid dispenser to a higher level.
• Plastic items may need to be towel dried.
• For the best drying performance activate the option XtraDry.
• We recommend to always use rinse aid, even in com- bination with multi-tablets.There are whitish streaks or
bluish layers on glasses and
dishes.• The release quantity...

ProblemPossible cause and solutionLimescale deposits on the ta-
bleware, on the tub and on
the inside of the door.• The level of salt is low, check the refill indicator.
• The cap of the salt container is loose. • Your tap water is hard. Refer to  "The water softener".
• Even using multi-functional tabs use salt and set re- generation of the water softener. Refer to  "The water
softener" .
• If lime scale deposits still remain, clean the appliance with appliance cleaners which are...