AEG Induction hob HKH81700FB User Manual

on. Touch  and choose the option to
unsplit the zone.If you remove cookware for
more than 10 seconds or you
deactivate the zone, the
function deactivates.To split or unsplit the zone
you can also touch the zone
symbol with two fingers.4.11  Automatic Heat Up
If you activate this function you can get a
necessary heat setting in a shorter time.The function sets the highest heat setting
for some time and then decreases to the correct heat setting.
To activate the function for a cooking
zone:  touch the...

• When the function operates youchange the heat setting only by
moving the cookware.
• When you use the function you can
also use the Reminder 
.
Lift up the cookware and
place in a different position
on the flexible zone if you
want to change the heat
setting. Sliding the cookware
can cause scratches and
discolouration of the surface.You can add the shortcut to
the function to the status bar
on the control panel 
.
Activating the function
To activate the function place the
cookware on the flexible zone....

4.15 PAUSE
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, you cannot
change the heat setting. The function has no effect on timers operation.You can add the shortcut to
the function to the status bar
on the control panel 
.
To activate the function:  touch  and
choose the function from the list. To
activate the function you can also touch
shortcut symbol on the status bar 
.
To deactivate the function:  touch the
display. Previous heat settings...

choose the desired setting. Confirm yourselection.When the sounds are off you
can still hear the sound when
timer comes to an end or
when you deactivate the
hob.4.20  Power management
function
• Cooking zones are grouped according to the location and number
of the phases in the hob. See the illustration.
• Each phase has a maximum electricity loading of 3700 W.
• The function divides the power between cooking zones connected to
the same phase.
• The function activates when the total electricity loading...

5.2 The noises during
operation
If you can hear:
• crack noise: cookware is made of different materials (sandwich
construction).
• whistle sound: you use the cooking zone with high power level and the
cookware is made of different
materials (sandwich construction).
• humming: you use high power level. • clicking: electric switching occurs.
• clicking on flexible zone: the pot is
not detected and the cooking zone is
not set.
• hissing, buzzing: the fan operates.
The noises are normal and do not refer
to...

Heat settingUse to:Time
(min)Hints12 - 13Heavy fry, hash browns, loin
steaks, steaks.5 - 15Turn halfway through.14Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.Boil large quantities of water. Power function is activated.6.  CARE AND CLEANINGWARNING!
Refer to Safety chapters.6.1  General information
• Clean the hob after each use.
• Always use cookware with clean bottom.
• Scratches or dark stains on the surface have no effect on how the hob
operates.
• Use a special cleaner...

ProblemPossible causeRemedy The fuse is blown.Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again
and again, contact a quali-
fied electrician.The hob deactivates.There is water or fat stains
on the control panel.Clean the control panel. You put something on the
sensor field 
.
Remove the object from the
sensor field.One pot activates two zones.The pot bottom is uneven.Move the pot slightly until
only one zone is detected.Two or more zones are de-
tected as one zone.The...

ProblemPossible causeRemedyThe display brightness is re-
duced.The temperature of the
zones is high. To ensure
long lifetime of the display
the brightness is reduced
depending on the tempera-
ture of the hob.Let the hob cool down.The display does not react
to the touch.Part of the display is covered
or the pots are placed to
near to the display.Remove the objects. Move
the pots away from the dis-
play.The power level is reduced.
The arrow pointing down
comes on in the cooking
zone symbol.Power management...

ProblemPossible causeRemedyE8 comes on.The electrical connection is
incorrect. The hob is con-
nected only to one phase.Speak to a qualified electri-
cian to check the installation.
Refer to the connection dia-
gram.E9  comes on.There is an error of the inter-
face.Deactivate the hob and acti-
vate it again. If the message
comes on contact an Author-
ised Service Centre.7.2  If you cannot find a
solution...
If you cannot find a solution to theproblem yourself, contact your dealer or
an Authorised Service...

8.4 Assemblywww.aeg.com20min. 50mm
min.500mm
min.2mm  min. 2 mm
A B
A 12 mm28 mm 38 mmB 62 mm46 mm36 mm
min  30 mmmin. 500 mm
< 20 mm > 20 mm
min. 2 mm
A
B
A 12 mm28 mm 38 mm B 62 mm46 mm36 mm
min. 500 mm R 5mm
min. 55mm490+1
mm750 +1
mm 65±1
 mm
490 ±1
 mm
55
±1
 mm