AEG Heat pump dryer T76781IH1 User Manual

ProgrammesLoad 1)Properties / Fabric mark
Outdoor2 kg
To dry outdoor pieces of clothing, technical,
sports, pile fabrics, waterproof and breathable
jackets, shell jacket teamed with a removable
fleece or inner insulation.Silk 1 kgTo dry hand-washable silk with
warm air and gentle movement./   
Wool  1 kg
Wool fabrics. Gentle drying for hand-washable
woollens. Remove immediately the items when
the programme is completed.
The wool drying cycle of this machine has been
approved by The Woolmark Company for...

 OptionsProgrammes 1)Dry PlusReversePlusAnticreaseTime Dry- ingCottons; Cupboard Dry +  Cottons; Cupboard Dry   Cottons; Iron Dry  Jeans  Bed Linen  Duvets   Time Drying  Synthetics; Extra Dry Synthetics; Cupboard Dry Synthetics; Iron Dry Easy Iron Outdoor  Silk   Wool     Extra Quick Mixed  1) Together with the programme you can set 1 or more options.6.2  Consumption DataProgrammeSpun at / residual humidityDrying timeEnergy
consump- tionCottons 8 kgCupboard Dry1400 rpm / 50%130 min.1,67 kWh 1000 rpm /...

ProgrammeSpun at / residual humidityDrying timeEnergy
consump- tionSynthetics 3,5 kgCupboard Dry1200 rpm / 40%55 min.0,60 kWh 800 rpm / 50%67 min.0,75 kWh7.  OPTIONS7.1  Dry Plus
This option can be used to adjust the
level of dryness. There are 3 levels to
choose from:
 - the default setting which is related
to the programme.
 - select to get the laundry slightly
more dried.
 - select to get the laundry dried
more thoroughly.
7.2  Reverse Plus
For gentle drying of delicate and
temperature sensitive...

8. BEFORE FIRST USERear drum packaging is
removed automatically when
dryer is activated for the first
time. Possible to hear some
noise.
Before you use the appliance for the first time:
• Clean the tumble dryer drum with a moist cloth.
• Start a short programme (e.g. 30 minutes) with moist laundry.
At the beginning of the
drying cycle (first 3-5 min.)
there could be a slightly
higher sound level. This is
due to the compressor
starting up. This is normal for
compressor powered
appliances such as...

Push the On/Off button.
If the appliance is on, some indications come in to the view on the display.9.4  Auto stand-by function
To decrease the energy consumption,
the automatic stand-by function
deactivates the appliance:
• if the Start/Pause button was not pushed in the time of 5 minutes.
• after 5 minutes from the programme end.
Push the On/Off button to activate the
appliance.
If the appliance is on, some indications come in to the view on the display.
9.5  Setting a programme
Use the programme dial...

9.9 Programme change
To change a programme:
1. Push the On/Off button to turn off
the appliance.
2. Push again the On/Off button to turn
on the appliance.
3. Set a new programme.9.10  Programme endClean the filter and drain the
water container after each
drying cycle. (See chapter
CARE AND CLEANING.)If the drying cycle is completed, the
symbol 
flashes on the display. If the
Buzzer option is on, the acoustic signal
sounds intermittently for 1 minute.
If you do not turn off the
appliance, the crease...

• the Tank indicator: is off if thesymbol 
 appears - the
water container indicator is
permanently  deactivated11. CARE AND CLEANING11.1  Cleaning the filter
At the end of each cycle the  Filter 
indicator comes on and you must clean
the filter.The filter collects the fluff
produced during the drying
cycle.
1. Open the door. Pull the filter up.
2.Push the hook to open the filter.
3.Use a moist hand to clean both parts
of the filter.
4. If necessary, clean the filter with a
brush under warm tap water...

1.Pull the water container out keeping
it in a horizontal position.
2. Pull the plastic connection out and
drain the water into a basin or
equivalent receptacle.
3. Push the plastic connection back in
and place the water container back
into position.
4. To continue the programme press
the Start/Pause button.
11.3  Cleaning the condenser
If the Condenser  indicator flashes,
inspect the condenser and its compartment. If it is dirty, clean it.
WARNING!
Do not touch the metal
surface with bare hands. Risk
of...

6.Close the heat exchanger cover.
7. Turn the lever until it clicks into
position.
8. Put the filter back.
11.4  Cleaning the drumWARNING!
Disconnect the appliance
before you clean it.
Use a standard neutral soap detergent to
clean the inner surface of the drum and
drum lifters. Dry the cleaned surfaces
with a soft cloth.CAUTION!
Do not use abrasive
materials or steel wool to
clean the drum.11.5  Cleaning the control
panel and housing
Use a standard neutral soap detergent to clean the control panel and...

Problem 1)Possible causeRemedy
Unsatisfactory
drying result.
Incorrect programme selection.Do the selection of the applicable
programme. 2)The filter is clogged.Clean the filter. 3)The Dry Plus option was in mini-
mum level. 4)Change the Dry Plus option to the
moderate or maximum level. 4)Too high volume of the load.Obey the maximum load volume.The airflow grill is clogged.Clean the airflow grill in the bot-
tom of the appliance.Dirt on the humidity sensor in the
drum.Clean the front surface of the...