AEG Heat pump dryer T75380AH2 User Manual

ProgrammesLoad 1)Properties / Fabric mark
Easy Iron1 kg (or 5shirts)
Easy care fabrics for which a minimum of ironing
is necessary. The drying results can be different
from one type of fabric to the other. Shake the
items before you put them in the appliance.
When the programme is completed, Immediate-
ly remove the items and put them on a hanger.
/ 
  
Active Wear2 kg
To dry outdoor pieces of clothing, technical,
sports, pile fabrics, waterproof and breathable
jackets, shell jacket teamed with a...

6.1 Programmes and options selection OptionsProgrammes 1)Dry PlusReverse
PlusAnti-creaseTime Dry- ingCottons; Extra Dry  Cottons;  Cupboard Dry  Cottons; Iron Dry  Jeans  Bed Linen  Pillows   Time Drying  Extra Quick Mixed  Synthetics; Extra Dry Synthetics; Cupboard Dry Synthetics; Iron Dry Easy Iron  Active Wear   Sports  Silk/Lingerie  Wool   2)1) Together with the programme you can set 1 or more options.
2)  Only with the drying rack — see chapter ACCESSORIES.6.2  Consumption DataProgrammeSpun at /...

ProgrammeSpun at / residual humidityDrying timeEnergy
consump- tionIron Dry1400 rpm / 50%111 min.1,66 kWh 1000 rpm / 60%127 min.1,89 kWhSynthetics 3,5 kgCupboard Dry1200 rpm / 40%57 min.0,64 kWh 800 rpm / 50%65 min.0,72 kWh7.  OPTIONS7.1  Dry Plus
This option helps to get the laundry
more dried. There are 3 possible
selections:
 - the default selection which is
related to the programme.
 - the selection to get the laundry
lightly dried.
 - the selection to get the laundry
more dried.
7.2  Reverse Plus
To...

8. BEFORE FIRST USEBefore you use the appliance for the first
time do these operations:
• Clean the tumble dryer drum with a moist cloth.
• Start a short programme (e.g. 30 minutes) with moist laundry.At the beginning of drying
cycle (3-5 min.) there could
be a slightly higher sound
level. It is because of start of
the compressor that is
normal for compressor
powered appliances such:
refrigerators, freezers.9.  DAILY USE9.1  Preparing the laundry
• Close the zippers.
• Close the fasteners of the duvet...

9.4 Auto stand-by function
To decrease the energy consumption, the automatic stand-by function
deactivates the appliance:
• if the Start/Pause button was not pushed in the time of 5 minutes.
• after 5 minutes from the programme end.
Push the On/Off button to activate the
appliance.
If the appliance is on, some indications come in to the view on the display.9.5  Setting a programme
Use the programme dial to set the
programme.
The possible time to complete the programme comes into the view on the display....

9.9 Programme change
To change a programme:
1. Push the On/Off button to turn off
the appliance.
2. Push again the On/Off button to turn
on the appliance.
3. Set a new programme.9.10  Programme endClean the filter and drain the
water container after each
drying cycle. (See chapter
CARE AND CLEANING.)If the drying cycle is completed, the
symbol 
flashes on the display. If the 
Buzzer option is on, the acoustic signal sounds intermittently for 1 minute.
If you do not turn off the
appliance, the crease...

11. CARE AND CLEANING11.1  Cleaning the filter
At the end of each cycle the indicator 
Filter  is on and you must clean the filter.The filter collects the fluff.
The fluff occurs while the
cloths are dried in the
tumble dryer.
1. Open the door. Pull the filter.
2.Push the hook to open the filter.
3.Use a moist hand to clean each filter
part.
4. If necessary clean the filter with the
brush under warm tap water and/or a
vacuum cleaner. Close the filter.
5. If necessary remove fluff from the
filter socket...

2.Move the plastic connection out and
drain the water into a basin or
equivalent receptacle.
3. Move plastic connection in and install
water container.
4. To continue the programme press
the Start/Pause button.
11.3  Cleaning the heat
exchanger
If the indicator  Condenser flashes, do
the inspection of the heat exchanger and
its compartment. If there is a dirt, clean
it.
To do the inspection:
1. Open the door. Pull the filter.
2.Move the release button on the
bottom of the door to open the heat
exchanger...

6.If necessary, remove the fluff from
the heat exchanger and its
compartment. You can use wet cloth and/or a vacuum cleaner with the
brush.
7. Close the heat exchanger cover.
8. Lock the blockage until it snaps.
9.Put the filter back.11.4  Cleaning the drumWARNING!
Disconnect the appliance
before you clean it.
Use a standard neutral soap detergent to
clean the inner surface of the drum and
drum ribs. Dry the cleaned surfaces with a soft cloth.
CAUTION!
Do not use abrasive
materials or steel wool to
clean...

12. TROUBLESHOOTINGProblem 1)Possible causeRemedy
The tumble dry-
er does not op-
erate.
The tumble dryer is not connected
to mains supply.Connect in at mains socket. Check
fuse in fuse box (domestic installa-
tion).The loading door is opened.Close the loading door.The On/Off button was not push-
ed.Push the On/Off button.The Start/Pause button was not
pushed.Push the Start/Pause button.The appliance is in the standby
mode.Push the On/Off button.
Unsatisfactory
drying result.
Incorrect programme...