AEG Front loader washing machine L99699FL User Manual

							Programme
Temperature rangeMaximum
load
Maximum
spin speedProgramme description
(Type of load and soil level)
Cottons
95°C - Cold
9 kg
1600 rpmWhite cotton and coloured cotton . Normal soil
and light soil.
Extra Silent
95°C - Cold
9 kgWhite and coloured cotton.  Normal soil and
light soil. The programme eliminates all spinning
phase to perform a silent cycle. The cycle stops
with water in the tub.
Synthetics
60° C - Cold
4 kg
1200 rpmSynthetic items or mixed fabric items . Normal
soil.
Easy Iron
60° C - Cold
4 kg
800 rpmSynthetic items requiring a gentle wash . Nor-
mal and light soil.1)
Delicates
40° C - Cold
4 kg
1200 rpmDelicate fabrics such as acrylics, viscose, poly-
ester items . Normal soil.
Wool/Silk
40° C - Cold
2 kg
1200 rpmMachine washable wool, hand washable wool
and delicate fabrics  with «hand washing» care
symbol.2)
Duvet
60°C - 30° C
3 kg
800 rpmSpecial programme for one  synthetic blanket,
duvet, bedspread  and so on.
Anti-Allergy
60° C
9 kg
1600 rpmWhite cotton items . This programme removes
micro-organisms thanks to the washing by 60°C
and adds one rinse. In this way the wash is more
effective.
Spin/Drain
9 kg
1600 rpmTo spin the laundry and to drain the water in the
drum.  All fabrics, except woollens and delicate
fabrics .
Rinse
Cold
9 kg
1600 rpmTo rinse and spin the laundry.  All fabrics, except
woollens and very delicate fabrics. Reduce the
spin speed accordingly to the type of laundry.
Outdoor
40° - Cold
2.5 kg
800 rpmWaterproof, sports and outdoor items . Do not
use any fabric softener!ENGLISH11            
						

							Programme
Temperature rangeMaximum
load
Maximum
spin speedProgramme description
(Type of load and soil level)
20 Min.-3kg
40°C - 30°C
3 kg
1200 rpmCotton and synthetic items with light soil level
or worn only once.
Super Eco 30°
30° - Cold
3 kg
1200 rpmCottons, synthetic and mixed fabrics.  Normal
soil3)
.Cottons Eco
4)
60°C - 40° C
9 kg
1600 rpmWhite cotton and fast-coloured cotton . Normal
soil. The energy consumption decreases and the
time of the washing programme is extended.Steam programmes5)
Steam can be used for dried, washed or worn once laundry. These programmes can 
reduce creases and odours and make your laundry softer. 
        
Do not use any detergent. If necessary, remove stains by washing or using localized  stain removal. 
Steam programmes do not perform any hygienic cycle. Do not set a Steam programme with these types of items: 
• Items to be washed at a temperature lower than 40°C.
• Items where it is not specified on the care label as being suitable for tumble drying.
• All items with plastic, metal, wooden parts or alike.Steam Refresh
1.5 kgSteam programme for  cotton and synthetic
items . This cycle removes odours from the laun-
dry.6)www.aeg.com12     
						

							Programme
Temperature rangeMaximum
load
Maximum
spin speedProgramme description
(Type of load and soil level)
Steam Anticrease
1.5 kgSteam programme for  synthetic items. This cy-
cle helps to dewrinkle the laundry.1)  To reduce creasing, this cycle regulates the water temperature and performs a soft wash and spin
phase. The appliance adds some rinses.
2)  During this cycle the drum rotates slowly to ensure a gentle wash. It can seem that the drum doesn't
rotate or doesn't rotate properly, but this is normal for this programme. 3)  Set this programme to decrease the energy and water consumption maintaining a good washing per-
formance.
4)  Standard programmes for the Energy Label consumption values.  According to regulation
1061/2010, these programmes are respectively the «Standard 60°C cotton programme» and the «Stand- ard 40°C cotton programme». They are the most efficient programmes in terms of combined energy and
water consumption for washing normally soiled cotton laundry.The water temperature of the washing phase may differ from the temperature declared
for the selected programme.
5)  If you set a Steam programme with dried laundry, at the end of the cycle the laundry could be humid.
It is better to expose the items to the fresh air for about 10 minutes to let the humidity dry. When the
programme is completed, quickly remove the laundry from the drum. After a steam cycle, items may be
ironed however with less effort.
6)  Steam does not remove animal odours.
Programme options compatibilityProgramme
Spin
Stains/
Pre-
wash 1)
SoakExtra
Rinse 2)Time
Save 3)Delay StartCottons■ ■■■■■■Extra Silent  ■■■■■■Synthetics■ ■■■■■■Easy Iron■ ■■ 4)■■■■Delicates■ ■■■■■■Wool/Silk ■ ■    ■Duvet■      ■Anti-Allergy■ ■■■■ ■Spin/Drain5)■■     ■Rinse■ ■  ■ ■ENGLISH13      
						

							Programme
Spin
Stains/Pre-
wash 1)
SoakExtra
Rinse 2)Time
Save 3)Delay StartOutdoor■ ■  ■ ■20 Min.-3kg■      ■Super Eco 30°■ ■  ■ ■Cottons Eco■ ■■■■■6)■1)  If you use liquid detergent, set a programme without Prewash. The Stain option is not available with a
temperature lower than 40°C.
2)  With a low spin speed the appliance performs delicate rinses and a short spin.
3)  If you set a shorter duration, we recommend that you decrease the load size. It is possible to fully load
the appliance, however the washing results can be less satisfactory. 4)  Only the Prewash function is available.
5)  Set the spin speed. Make sure it is suitable for the type of fabric being washed. If you set the No Spin
option then only the drain phase is available. 6)  With these programmes you can set only the shorter duration.5.2  Woolmark Apparel Care -
Green
The wool wash cycle of this machine has
been approved by The Woolmark
Company for the washing of wool
garments labelled as «hand wash»
provided that the garments are washed
according to the instructions issued by
the manufacturer of this washing
machine. Follow the garment care label
for drying and other laundry instructions.
M1361
In UK, Eire, Hong Kong and India the
Woolmark symbol is a certification
trademark.6.  CONSUMPTION VALUESThe data in this table are approximate. Different variables can affect the
data: the quantity and type of laundry, the water and ambient tempera-ture.www.aeg.com14       
						

							At the start of the programme, the display shows the programme dura-tion for the maximum load capacity.
During the washing phase the programme duration is automatically cal- culated and can be greatly reduced if the laundry load is lower than the
maximum load capacity (e.g. Cotton 60°C, maximum load capacity  9 kg,
the programme duration exceeds 2 hours; actual load 1 kg, the pro- gramme duration will be less than 1 hour).When the appliance is calculating the real programme duration a dot flashes in the display.ProgrammesLoad (kg)Energy con-
sumption
(kWh)Water con-
sumption
(litre)Approxi-
mate pro-
gramme du-
ration (mi-
nutes)Remaining
moisture
(%)1)Cottons 60°C91,558722044Cottons 40°C90,978720544Synthetics 40°C40,725515535Delicates 40°C40,60598935Wool/Silk 30°C 2)20,35586030Standard cotton programmes  Standard 60°C cot-
ton 90,6405722644Standard 60°C cot-
ton 4.50,3494118544Standard 40°C cot-
ton 4.50,34740199441)  At the end of spin phase.
2)  Not available for some models.Off Mode (W)Left On Mode (W)0.050.05The information given in the chart above is compliant with the EU Commission regulation
1015/2010 implementing directive 2009/125/EC.7.  OPTIONS7.1  Programme knob
Turn this knob to set a programme. The
related programme indicator comes on.ENGLISH15      
						

							7.2 Steam
Touch this button to set the steam level.
This is possible only with programmes
where the steam function is available. The duration of the steam phase
changes accordingly to your selection.7.3  Memory
Touch one of the buttons Memory to
memorise a programme or to set a
memorised programme.
Memorise a programme:
1. Press button Auto Off to activate the
appliance.
2. Turn the programme knob to your
favourite programme.
3. If it is necessary, set one or more
functions.
4. Touch and hold one of the buttons
Memory for some seconds.
The buzzer sounds and the display shows
that the programme is saved.
Set a memorised programme:  Touch
the button where you memorised the
programme you want to set.
The programme indicator comes on and
the display shows all the information.
To cancel a memorised
programme you can only
memorise a new
programme.7.4  Start/Pause
Touch button Start/Pause to start or
interrupt a programme.
7.5  Delay Start
Touch button Delay Start to delay the
start of a programme from 30 minutes to
20 hours.
7.6  Time Save
Touch button Time Save to decrease the
programme time.
You can select:
• SHORTENED DURATION: to wash items with daily soil.
• EXTRA QUICK: to wash quickly items
with almost no soil.
Some programmes accept
only one of these functions.7.7  Extra Rinse
Touch button Extra Rinse to add rinsing
phases to a programme.
Use this function for persons allergic to
detergents and in areas where the water
is soft.
7.8  Stains/Prewash
Touch this button to set one of the
following functions:
•
  Prewash
Use this function for heavy soil. The
appliance adds a prewash phase to
the main wash. The programme
duration increases.
•
  Soak
Use this function for heavy soil. The
appliance soaks the laundry at 30°C
for about half an hour before to wash.
•
  Stains
Use this function for laundry with hard
stains to remove. When you set this function, put the stain remover into
compartment 
.
The programme duration
increases. This function is
not available with a
temperature lower than
40° C.7.9  Spin
Touch button Spin to:
• Decrease the maximum speed of the spin phase of the programme.
The display shows only
the spin speeds available
for the set programme.
• Deactivate the spin phase ( 'No spin' function).
• Activate the  Rinse Hold function.
Set this function to prevent fabric
creases. The appliance does not drain
the water when the programme is completed.
www.aeg.com16         
						

							7.10 Temperature
Touch this button to change the default temperature.Symbols  and  = cold water8.  SETTINGS8.1  Acoustic signals
You can hear the acoustic signals when:
• You activate the appliance.
• You deactivate the appliance.
• You touch the buttons.
• The programme is completed.
• The appliance has a malfunction.
To  deactivate/activate  the acoustic
signals, press Stains/Prewash and Extra Rinse at the same time for 6 seconds.If you deactivate the
acoustic signals, they
continue operate only when
you touch the buttons and
when a malfunction occurs.8.2  Child Lock function
With this function you can prevent that
the children play with the control panel.
• To  activate/deactivate  this function,
touch Temp. and Spin buttons at the
same time until the indicator 
 
comes on/goes off .
You can activate this function:
• After you touch Start/Pause : all the buttons and the programme knob aredeactivated.
• Before you touch Start/Pause : the appliance cannot start.8.3  Permanent Extra Rinse
With this function you can keep the extra
rinse permanently on when you set a new
programme.
• To  activate/deactivate  this function
touch Time Save and Delay Start at
the same time until the indicator 
 
comes on/goes off .
8.4 Weight sensor activating
or deactivating
To activate or deactivate the weight
sensors, press Temp. and Stains/Prewash
at the same time for some seconds.
9.  BEFORE FIRST USE1.Put a small quantity of detergent in
the compartment for washing phase.
2. Set and start a programme for cotton
at the highest temperature without
laundry.
This removes all possible dirt from the
drum and the tub.9.1  Language setting
The first time you activate the appliance,
the display shows the default language
and tells you to confirm it or change it:
1. Turn the programme knob to set the
desired language.
2. When the display shows the
necessary language touch Start/
Pause button to confirm the
selection.
9.2  Change the language after
the first activation
1. Touch button Spin and button
Stains/Prewash at the same time for
some seconds.
2. When the display shows the
language set, turn the programme
knob to set the new language.
3. Touch Start/Pause button to confirm
the selection.9.3  Clock setting
After you set the language, the display
tells to set the clock. The hour digits
flash.
ENGLISH17      
						

							1.Turn the programme knob to change
the hour.
2. Touch Start/Pause button to confirm
the selection.
The minute digits flash. 3. Turn the programme knob to change
the minutes.
4. Touch Start/Pause button to confirm
the selection.9.4  Change the time of the
day after the first activation
1. Touch the button Extra Rinse and the
button Time Save at the same time
for some seconds.
The hour digits flash.
2. Turn the programme knob to change
the hour.
3. Touch Start/Pause button to confirm
the selection.
The minute digits flash.
4. Turn the programme knob to change
the minutes.
5. Touch Start/Pause button to confirm
the selection.10.  DAILY USEWARNING!
Refer to Safety chapters.10.1  Using weight sensorsFor a correct operation of
the weight sensor, activate
the appliance and set the
programme BEFORE you
put the laundry in the drum.10.2  Before activating the
appliance
1. Open the water tap.
2. Connect the mains plug to the mains
socket.
10.3  Activating the appliance
and setting a programme
1. Press button Auto Off to activate the
appliance.
2. Turn the programme knob to the
necessary programme or touch one
of the Memory buttons to set a
memorised programme.
The programme indicator comes on.
The indicator of Start/Pause button
flashes with red colour.
The display shows the default
temperature and spin and the empty
indicator bars of the available functions. 3. If it is necessary, touch Temperature
button and Spin button to change
the water temperature and the spin
speed.
4. If necessary, touch the other buttons
to add some functions or to set a
delayed start.
The display shows the symbol of the set
function and the digit shows the delayed
time.10.4  Loading the laundry
1.Open the appliance door.
The display shows the maximum load for
the set programme 
 and the weight of
the laundry 
 you put in the drum.
The text bar on the display tells to add the laundry.
2. Put the laundry in the drum, one item
at time. Shake the items before you
put them in the drum.
On the display the weight of the laundry
updates by steps of kg 0.5. The weight is
indicative and changes with the type of
the laundry.
www.aeg.com18     
						

							If you put in the drum more
laundry than the maximum
load, the text bar tells that
you have put more than the
maximum load. You can
wash your laundry but the
water and energy
consumption increase.
Remove some items to have
the best consumption and
washing performance
The overload indication is
available only for
programmes with a
maximum load lower than
the appliance maximum
load.
3. Close the door.
The text bar tells the percentage of detergent to use.
This data is indicative and refers to the
detergent quantity for a maximum load
that the manufacturer recommends.
4. Make sure that no laundry stays
between the seal and the door.
There is a risk of water leakage or
damage to the laundry.
10.5  Filling the detergent and
additivesCompartment for prewash phase
an soak programme.Compartment for washing phase.Compartment for liquid additives
(fabric conditioner, starch).Maximum level for quantity of
liquid additives.Compartment for stain remover.Flap for powder or liquid
detergent.Always follow the
instructions that you find on the packaging of the
detergent products.10.6  Check the position of the
flap
1. Pull out the detergent dispenser until
it stops.
2. Press the lever down to remove the
dispenser.
ENGLISH19          12  
						

							3.To use powder detergent, turn the
flap up.
4. To use liquid detergent, turn the flap
down.
With the flap in the
position DOWN: • Do not usegelatinous or thick
liquid detergents.
• Do not put more liquid detergent than
the limit shown on in
the flap.
• Do not set the prewash phase.
• Do not set the delay start function.
5. Measure out the detergent and the
fabric conditioner.
6. Carefully close the detergent
dispenser.
Make sure that the flap does not cause a blockage when you close the drawer.
10.7  Starting the programme
without the delay start
Touch button Start/Pause to start the
programme.
The related indicator stops flashing and stays on.10.8  Starting a programme
with the delay start
1. Touch button Delay Start again and
again to set the desired delayed
start.
The display show the expected end of
the programme.
2. Touch button Start/Pause.
The appliance starts the countdown of the delay start.
When the countdown is completed, the
programme starts automatically.
Before you touch button
Start/Pause to start the
appliance, you can cancel or
change the set of the delay
start.10.9  Cancelling the delay start
1.Touch button Start/Pause. The
related indicator flashes.
2. Touch button Delay Start again and
again until the display tells that there
is no delay start.
3. Touch button Start/Pause. The
programme starts.
10.10  Behaviour of the
applianceAfter approximately 15
minutes from the start of the
programme:
• The appliance adjusts automatically the cycle
time to the laundry you
have put in the drum to
have perfect washing
results in the minimum
necessary time.
• The display shows the new time value.www.aeg.com20A B