AEG Front loader washing machine L89499FL User Manual

							Programme
Temperature rangeMaximum
load
Maximum
spin speedProgramme description
(Type of load and soil level)
Super Eco 30°  3)
30°C - Cold
3 kg
1200 rpmCottons, synthetics and mixed fabrics.  Normal
soil.
Cottons Eco 4)
60°C - 40° C
9 kg
1400 rpmWhite cotton and colour-fast cotton . Normal soil.
The energy consumption decreases and the time of
the washing programme is extended.Steam programmes 5)
Steam can be used for dried, washed or worn once laundry. These programmes can 
reduce creases and odours and make your laundry more soft. 
        
Do not use any detergent. If necessary, remove stains by washing or using localized  stain removal. 
Steam programmes do not perform any hygienic cycle. Do not set a Steam programme with these types of items: 
• items where it is not specified on the care label as being suitable for tumble drying.
• all items with plastic, metal, wooden parts or alike.
Refresh
40° C
1.5 kgSteam programme for  cotton and synthetic items .
This cycle removes odours from the laundry. 6)ENGLISH11      
						

							Programme
Temperature rangeMaximum
load
Maximum
spin speedProgramme description
(Type of load and soil level)
Anticrease
40° C
1.5 kgSteam programme for  synthetic items. This cycle
helps to dewrinkle the laundry.1)  To reduce the creases of the laundry, this cycle regulates the water temperature and performs a soft
wash and spin phase. The appliance adds some rinses. 2)  During this cycle the drum rotates slowly to ensure a gentle washing. It can seem that the drum
doesn't rotate or doesn't rotate properly. Consider this as a normal functioning of the appliance. 3)  Set this programme to decrease the energy and water consumption maintaining a good washing per-
formance.
4)  Standard programmes for the Energy Label consumption values.  According to regulation
1061/2010, these programmes are respectively the «Standard 60°C cotton programme» and the «Stand- ard 40°C cotton programme». They are the most efficient programmes in terms of combined energy and
water consumption for washing normally soiled cotton laundry.The water temperature of the washing phase may differ from the temperature declared for the selected programme.
5)  If you set a Steam programme with dried laundry, at the end of the cycle the laundry could be humid.
It is better to expose the items to the fresh air for about 10 minutes to let the humidity dry. When the
programme is completed, quickly remove the laundry from the drum. After a steam cycle, items may to
be ironed anyway, but with less effort!
6)  Steam does not remove animal odours.
Programme options compatibilityProgrammeSpinStain/
Prewash  1)Extra
Rinse  2)Time
Save  3)Delay
StartCottons■ ■■■■■Extra Silent   ■■■■Synthetics■ ■■■■■Easy Iron■ ■■  4)■■■Delicates■ ■■■■■Wool/Silk ■ ■   ■Duvet■     ■Anti-Allergy■ ■■■ ■Spin/Drain 5)■■    ■www.aeg.com12       
						

							ProgrammeSpinStain/
Prewash  1)Extra
Rinse  2)Time
Save  3)Delay
StartRinse■ ■ ■ ■Outdoor■ ■ ■■■20 min.-3Kg■     ■Super Eco■ ■ ■ ■ Cottons Eco■ ■■■■ 6)■1) 
If you use liquid detergent, set a programme without Prewash. The Stain option is not available with a
temperature lower then 40°C.
2)  With a low spin speed the appliance performs delicate rinses and a short spin.
3)  If you set a shorter duration, we recommend that you decrease the quantity of the load. It is possible
to load fully the appliance, however the washing results are reduced. 4)  Only the Prewash function is available.
5)  Set the spin speed. Make sure it agrees with the laundry. If you set No Spin option the only drain
phase is available.
6)  With these programmes you can set only the shorter duration.5.  PROGRAMMES5.1  Programme ChartProgramme
Temperature rangeMaximum
load
Maximum
spin speedProgramme description
(Type of load and soil level)Washing programmes
Cottons
95°C - Cold
9 kg
1400 rpmWhite cotton and coloured cotton . Normal soil
and light soil.
Extra Silent
95°C - Cold
9 kgWhite and coloured cotton.  Normal soil and light
soil. The programme eliminates all spinning phase
to perform a silent cycle. The cycle stops with water
in the tub.
Synthetics
60° C- Cold
3 kg
1200 rpmSynthetic items or mixed fabric items . Normal
soil.
Easy Iron
60° C - Cold
3 kg
800 rpmSynthetic items to be gentle washed . Normal and
light soil.ENGLISH13        
						

							Programme
Temperature rangeMaximum
load
Maximum
spin speedProgramme description
(Type of load and soil level)
Delicates
40° C - Cold
3 kg
1200 rpmDelicate fabrics as acrylics, viscose, polyester
items . Normal soil.
Wool/Silk
40° C - Cold
2 kg
1200 rpmMachine washable wool, hand washable wool
and delicate fabrics  with «hand washing» care
symbol.
Duvet
60°C - 30° C
3 kg
800 rpmSpecial programme for one  synthetic blanket, du-
vet, bedspread  and so on.
Anti-Allergy
60° C
9 kg
1400White cotton items . This programme removes mi-
cro-organisms thanks to the washing by 60°C and
adds one rinse. In this way the wash is more effec-
tive.
Spin/Drain
9 kg
1400 rpmTo spin the laundry and to drain the water in the
drum.  All fabrics .
Rinse
Cold
9 kg
1400 rpmTo rinse and spin the laundry.  All fabrics.
Outdoor
40° - Cold
2.5 kg
800 rpmWaterproof, sports and outdoor items. . Do not
use any fabric softener!
20 min.-3Kg
40°C - 30°C
3 kg
1200 rpmCottons and synthetics items with light soil level
or worn only once.
Super Eco 30° 
30°C - Cold
3 kg
1200 rpmCottons, synthetics and mixed fabrics.  Normal
soil.
Cottons Eco
60°C - 40° C
9 kg
1400 rpmWhite cotton and colour-fast cotton . Normal soil.
The energy consumption decreases and the time of
the washing programme is extended.www.aeg.com14             
						

							Programme
Temperature rangeMaximum
load
Maximum
spin speedProgramme description
(Type of load and soil level)Steam programmes
Steam can be used for dried, washed or worn once laundry. These programmes can 
reduce creases and odours and make your laundry more soft.          
Do not use any detergent. If necessary, remove stains by washing or using localized  stain removal. 
Steam programmes do not perform any hygienic cycle. Do not set a Steam programme with these types of items: 
• items where it is not specified on the care label as being suitable for tumble drying.• all items with plastic, metal, wooden parts or alike.
Refresh
40° C
1.5 kgSteam programme for  cotton and synthetic items .
This cycle removes odours from the laundry.
Anticrease
40° C
1.5 kgSteam programme for  synthetic items. This cycle
helps to dewrinkle the laundry.Programme options compatibilityProgrammeSpinStain/
Prewash Extra
Rinse Time
Save Delay StartCottons■ ■■■■■Extra Silent   ■■■■Synthetics■ ■■■■■Easy Iron■ ■■ ■■■Delicates■ ■■■■■Wool/Silk ■ ■   ■Duvet■     ■Anti-Allergy■ ■■■ ■Spin/Drain■■    ■ENGLISH15        
						

							ProgrammeSpinStain/
Prewash Extra
Rinse Time
Save Delay StartRinse■ ■ ■ ■Outdoor■ ■ ■■■20 min.-3Kg■     ■Super Eco■ ■ ■ ■ Cottons Eco■ ■■■■■6.  CONSUMPTION VALUESThe data of this table are approximate. Different causes can change the
data: the quantity and type of laundry, the water and ambient tempera-
ture.At programme start the display shows the duration programme for the maximum load capacity. During the washing phase the programme dura-
tion is automatically calculated and can be greatly reduced if the laundry load is lower than the maximum load capacity (e.g. Cotton 60°C, maxi-
mum load capacity  9 kg, the programme duration exceeds 2 hours; real
load 1 kg, the programme duration don’t reach 1 hour). When the appli- ance is calculating the real programme duration a dot blinks in the dis-
play.ProgrammesLoad (kg)Energy con-
sumption
(kWh)Water con-
sumption
(litre)Approxi-
mate pro-
gramme du-
ration (mi-
nutes)Remaining
moisture
(%)  1)Cottons 60 °C91.557917052Cottons 40 °C90.977916452Synthetics 40 °C30.555410935Delicates 40 °C30.60598935Wool/Silk 30 °C20.35586030Standard cotton programmesStandard 60 °C cot-
ton90.645722652Standard 60 °C cot-
ton4.50.354118552www.aeg.com16      
						

							ProgrammesLoad (kg)Energy con-
sumption
(kWh)Water con-
sumption
(litre)Approxi-
mate pro-
gramme du-
ration (mi-
nutes)Remaining
moisture
(%)  1)Standard 40 °C cot-
ton4.50.3540199521)  At the end of spin phase.Off Mode (W)Left On Mode (W)0,050,05The information given in the chart above are in compliance with the EU Commission regu-
lation 1015/2010 implementing directive 2009/125/EC.7.  OPTIONS7.1  Start/Pause
Press button Start/Pause to start or
interrupt a programme.7.2  Delay Start
With this option you can delay the start
of a programme from 30 minutes to 20
hours.
The display shows the related indicator.
7.3  Time Save
With this option you can decrease the
programme duration.
• Press this button one time to set 'Shortened duration' for items withdaily soil.
• Press this button two times to set 'Extra Quick' for items with almost no
soil.
Some programmes accept
only one of the two options.7.4  Extra Rinse
With this option you can add some rinses
to a washing programme.
Use this option for persons allergic to detergents and in areas where the water
is soft.
The related indicator comes on.
7.5  Stain/Prewash
Press this button to add the stain and/or
a prewash phase to a programme.
Press the button again and again to
activate one or two options. The related
symbol and the indicator bar comes on
in the display.
• Stain:  Use this option for laundry with
hard stains to remove.
When you set this option, put the
stain remover into compartment 
.
This function increases the
programme duration.
This option is not available
with a temperature lower
than 40° C.
• Prewash:  Use this option to add a
prewash phase before the washing phase.
We recommend that you use this
option when you have laundry with a
high level of soil.
The set of this option
increases the programme
duration.7.6  Spin
Press this button to:
• Decrease the maximum speed of the spin phase of the programme.
ENGLISH17     
						

							The display shows only the
spin speeds available with
the set programme.
• Deactivate the spin phase.
• Activate the  Rinse Hold function.
Set this function to prevent fabric
creases. The appliance does not drain
the water when the programme is
completed.
7.7  Temperature
Press this button to change the default
temperature. When the display shows 
and , the appliance does not heat
the water.
8.  SETTINGS8.1  Acoustic signals
The acoustic signals operate when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To  deactivate/activate  the acoustic
signals, press Stain/Prewash and Extra Rinse at the same time for 6 seconds.If you deactivate the acoustic
signals, they continue operate
when the appliance has a
malfunction.8.2  Child Lock 
With this option you can prevent that the
children play with the control panel.
• To  activate/deactivate  this option,
press Temp. and Spin at the same
time until the indicator 
  comes on/
goes off .
You can activate this option:
• After you press Start/Pause : the options and the programme knob arelocked.
• Before you press Start/Pause : the appliance cannot start.8.3  Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a newprogramme.
• To  activate/deactivate  this option
press Time Save and Delay Start at
the same time until the indicator ExtraRinse  comes on/goes off .
8.4 Weight sensor activating
or deactivating
To activate or deactivate the weight
sensors, press Temp. and Stain/Prewash
at the same time for some seconds.
9.  BEFORE FIRST USE1.Put 2 litre of water in the detergent
compartment for washing phase.
This activates the drain system.
2. Put a small quantity of detergent in
the compartment for washing phase.
3. Set and start a programme for cotton
at the highest temperature without
laundry.This removes all possible dirt from the drum and the tub.10.  DAILY USEWARNING!
Refer to Safety chapters.www.aeg.com18        
						

							10.1 Using weight sensorsFor a correct operation of the
weight sensor, activate the
appliance and set the
programme BEFORE you put
the laundry in the drum.10.2  Before activating the
appliance
1. Open the water tap.
2. Connect the mains plug to the mains
socket.
10.3  Activating the appliance
and setting a programme
1. Press button AutoOff to activate the
appliance.
2. Turn the programme knob to the
necessary programme.
The programme indicator comes on. The indicator of Start/Pause buttonflashes with red colour.
The display shows the default
temperature and spin and the empty
indicator bars of the available functions. 3. If it is necessary, press Temperature
button and Spin button to change
the water temperature and the spin speed.
4. If necessary, press the related
buttons to add some functions or to
set a delayed start.
The display shows the symbol of the set
function and the digit shows the delayed time.
10.4  Loading the laundry
1.Open the appliance door.
The display shows the maximum load for
the programme 
 and the weight of the
laundry 
.
2. Put the laundry in the drum, one item
at time. Shake the items before you put them in the drum.
On the display the weight of the laundry
updates by steps of kg 0.5. The weight is indicative and changes with the type of
the laundry.
If you put in the drum more
laundry than the maximum
load, the symbol 
 and
the value 
 start to flash. You
can wash your laundry but the
water and energy
consumption increase. To
have the best consumption
and washing performance
remove some items until the
symbols stop to flash. The
overload indication is
available only for programmes
with a maximum load lower
than the appliance maximum
load.
3. Close the door.
The value 
 near the symbol  on the
display shows the quantity of the
detergent to use.
This data is indicative and refers to the
detergent quantity for a maximum load
that the manufacturer recommends.
4. Make sure that no laundry stays
between the seal and the door.
There is a risk of water leakage or
damage to the laundry.
ENGLISH19          
						

							10.5 Filling the detergent and
additivesCompartment for prewash phase
an soak programme.Compartment for washing phase.Compartment for liquid additives
(fabric conditioner, starch).Maximum level for quantity of
liquid additives.Compartment for stain remover.Flap for powder or liquid
detergent.Always obey the instructions
that you find on the
packaging of the detergent
products.10.6  Check the position of the
flap
1. Pull out the detergent dispenser until
it stops.
2. Press the lever down to remove the
dispenser.
3. To use powder detergent, turn the
flap up.
4. To use liquid detergent, turn the flap
down.
With the flap in the position
DOWN: • Do not use gelatinousor thick liquid
detergents.
• Do not put more liquid detergent than the
limit showed in the
flap.
• Do not set the prewash phase.
• Do not set the delay start function.
5. Measure out the detergent and the
fabric conditioner.
6. Carefully close the detergent
dispenser.
Make sure that the flap does not cause a blockage when you close the drawer.
www.aeg.com20        12 A B