AEG Freestanding dishwasher F66742W0P User Manual

							Problem and alarm codePossible cause and solutionRattling/knocking sounds
from inside the appliance.• The tableware is not properly arranged in the baskets. Refer to basket loading leaflet.
• Make sure that the spray arms can rotate freely.The appliance trips the cir-
cuit-beaker.• The amperage is insufficient to supply simultaneously all the appliances in use. Check the socket amperage and
the capacity of the meter or turn off one of the applian-
ces in use.
• Internal electrical fault of the appliance. Contact an Au- thorised Service Centre.Refer to  "Before first use" , 
"Daily use" , or "Hints and
tips"  for other possible
causes.
Once you have checked the appliance,
deactivate and activate the appliance. If
the problem occurs again, contact an
Authorised Service Centre.
For alarm codes not described in the
table, contact an Authorised Service
Centre.12.1  The washing and drying results are not satisfactoryProblemPossible cause and solutionPoor washing results.• Refer to  "Daily use" , "Hints and tips"  and basket
loading leaflet.
• Use more intensive washing programmes.
• Clean spray arm jets and filter. Refer to  "Care and
Cleaning" .Poor drying results.• Tableware has been left for too long inside a closed
appliance.
• There is no rinse aid or the dosage of rinse aid is not enough. Set the rinse aid dispenser to a higher level.
• Plastic items may need to be towel dried.
• For the best drying performance activate the option XtraDry and set AirDry.
• We recommend to always use rinse aid, even in com- bination with multi-tablets.There are whitish streaks or
bluish layers on glasses and
dishes.• The release quantity of rinse aid is too much. Adjust the rinse aid level to a lower level.
• The quantity of detergent is too much.There are stains and dry water
drops on glasses and dishes.• The released quantity of rinse aid is not sufficient. Ad- just the rinse aid level to a higher level.
• The quality of the rinse aid can be the cause.ENGLISH21  
						

							ProblemPossible cause and solutionThe dishes are wet.• For the best drying performance activate the optionXtraDry and set AirDry .
• The programme does not have a drying phase or has a drying phase with low temperature.
• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the cause.
• The quality of the multi-tablets can be the cause. Try a different brand or activate the rinse aid dispenser and
use rinse aid and multi-tablets together.The interior of the appliance is
wet.• This is not a defect of the appliance. it is caused by the humidity in the air that condenses on the walls.Unusual foam during washing.• Use the detergent for dishwashers only.• There is a leak in the rinse aid dispenser. Contact an Authorised Service Centre.Traces of rust on cutlery.• There is too much salt in the water used for washing. Refer to  "The water softener" .
• Silver and stainless steel cutlery were placed together. Avoid to put silver and stainless steel items close to-
gether.There are residues of deter-
gent in the dispenser at the
end of the programme.• The detergent tablet got stuck in the dispenser and therefore was not completely washed away by water.
• Water cannot wash away the detergent from the dis- penser. Make sure that the spray arm is not blocked or
clogged.
• Make sure that items in the baskets do not impede the lid of the detergent dispenser from opening.Odours inside the appliance.• Refer to  "Internal cleaning" .Limescale deposits on the ta-
bleware, on the tub and on
the inside of the door.• The level of salt is low, check the refill indicator.
• The cap of the salt container is loose. • Your tap water is hard. Refer to  "The water softener".
• Even using multi-functional tabs use salt and set re- generation of the water softener. Refer to  "The water
softener" .
• If lime scale deposits still remain, clean the appliance with appliance cleaners which are particularly suitable
for this purpose.
• Try different detergent.
• Contact the detergent manufacturer.Dull, discoloured or chipped
tableware.• Make sure that only dishwasher-safe items are washed in the appliance.
• Load and unload the basket carefully. Refer to basket loading leaflet.
• Place delicate items in the upper basket.www.aeg.com22 
						

							Refer to "Before first use" , 
"Daily use"  or "Hints and
tips"  for other possible
causes.13.  TECHNICAL INFORMATIONDimensionsWidth / height / depth (mm)596 / 850 / 610Electrical connection 1)Voltage (V)200 - 240Frequency (Hz)50 / 60Water supply pressurebar (minimum and maximum)0.5 - 8MPa (minimum and maximum)0.05 - 0.8Water supplyCold water or hot water 2)max 60 °CCapacityPlace settings15Power consumptionLeft-on mode (W)5.0Power consumptionOff-mode (W)0.101) 
Refer to the rating plate for other values.
2)  If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian energy), use the
hot water supply to decrease energy consumption.14.  ENVIRONMENTAL CONCERNSRecycle the materials with the symbol .
Put the packaging in applicable
containers to recycle it. Help protect the
environment and human health and to recycle waste of electrical and electronic
appliances. Do not dispose appliancesmarked with the symbol  with the
household waste. Return the product to
your local recycling facility or contact
your municipal office.
*
ENGLISH23    
						

							www.aeg.com/shop117887130-A-232016