AEG Freestanding dishwasher F66742W0P User Manual

• The indicators , 
and  go off.
• The indicator 
 continues to
flash.
• The display shows the current
setting: e.g. 
= level 4.
– The levels of rinse aid are from 0A to 6A.
– Level 0 = no rinse aid is released.
3. Press  Delay  again and again to
change the setting.
4. Press the on/off button to confirm
the setting.
6.3  The rinse aid empty
notification
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released during the hot rinse phase.
When rinse aid...

2.Press  Option .
• The indicators 
, 
and  go off.
• The indicator 
 continues to flash.
• The display shows the current
setting: 
 = AirDry activated.
3. Press  Option  to change the setting:
 = AirDry deactivated.
4. Press the on/off button to confirm
the setting.7.  OPTIONSDesired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.Not all options are
compatible with each other.
If you have selected non...

How to activate Sanitize
Press  Option  until the indicator 
comes on.
If the option is not applicable to the
programme, the related indicator does
not come on or it flashes quickly for a few seconds and then goes off.
The display shows the updated
programme duration.8.  BEFORE FIRST USE1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open...

8.2 How to fill the rinse aid
dispenserCAUTION!
Only use rinse aid
specifically designed for dishwashers.1. Open the lid ( C).
2. Fill the dispenser ( B) until the rinse
aid reaches the marking ''MAX''.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4. Close the lid. Make sure that the lid
locks into position.Fill the rinse aid dispenser
when the indicator ( A)
becomes clear.If you use multi-tablets and
the drying performance is
satisfactory, the rinse...

detergent on the inner part of the
appliance door.
4. Close the lid. Make sure that the lid
locks into position.9.2  Setting and starting a
programmeThe Auto Off function
This function decreases energy
consumption by deactivating
automatically the appliance when it is not
operating.
The function comes into operation:
• 5 minutes after the completion of the programme.
• After 5 minutes if the programme has not started.
Starting a programme
1. Press the on/off button to activate
the appliance. Make sure...

End of the programme
All buttons are inactive except for the
on/off button.
1. Press the on/off button or wait for
the Auto Off function toautomatically deactivate the
appliance.
If you open the door before the
activation of Auto Off, the appliance
is automatically deactivated.
2. Close the water tap.10.  HINTS AND TIPS10.1  General
The following hints will ensure optimal
cleaning and drying results in daily use
and also help to protect the
environment.
• Remove larger residues of food from the dishes...

• Remove larger residues of food fromthe dishes into the waste bin.
• Make soft the remaining burned food on the items.
• Put hollow items (cups, glasses and pans) with the opening down.
• Make sure that glasses do not touch other glasses.
• Put cutlery and small items in the cutlery drawer.
• Put light items in the upper basket. Make sure that the items do not
move.
• Make sure that the spray arms can
move freely before you start a
programme.10.5  Before starting a
programme
Make sure that:
• The...

2.Remove the filter ( C) out of filter ( B). 
3. Remove the flat filter ( A).
4. Wash the filters.
5.Make sure that there are no residues
of food or soil in or around the edge
of the sump.
6. Put back in place the flat filter ( A).
Make sure that it is correctly
positioned under the 2 guides.
7. Reassemble the filters ( B) and ( C).
8. Put back the filter ( B) in the flat filter
( A ). Turn it clockwise until it locks.CAUTION!
An incorrect position of the
filters can cause bad
washing results and damage...

4.To engage again the spray arm to
the basket, press the spray arm
upwards in the direction indicated by the lower arrow and simultaneouslyturn it counterclockwise until it locks
into place.
11.3  External cleaning
• Clean the appliance with a moist soft cloth.
• Only use neutral detergents.
• Do not use abrasive products, abrasive cleaning pads or solvents.11.4  Internal cleaning
• Carefully clean the appliance,
including the rubber gasket of the
door, with a soft damp cloth.
• If you use short duration...

Problem and alarm codePossible cause and solutionYou cannot activate the ap-
pliance.• Make sure that the mains plug is connected to the mains socket.
• Make sure that there is no damaged fuse in the fuse box.The program does not start.• Make sure that the appliance door is closed.• Press  Start.
• If the delay start is set, cancel the setting or wait for the end of the countdown.
• The appliance has started the procedure to recharge the resin inside the water softener. The duration of the
procedure is...