AEG Freestanding dishwasher F66609W0P User Manual
Here you can view all the pages of manual AEG Freestanding dishwasher F66609W0P User Manual. The AEG manuals for Dishwasher are available online for free. You can easily download all the documents as PDF.
Page 11
7. OPTIONSDesired options must be activated every time before you start a programme. It is not possible to activate or deactivate options while a programme is running.Not all options are compatible with each other. If you have selected non compatible options, the appliance will automatically deactivate one or more of them. Only the indicators of the options still active will stay on.7.1 Multitab Activate this option when you use multi- tablets that integrate the salt, rinse aid and detergent functions....
Page 12
When you start a programme, the appliance can take up to 5 minutes to recharge the resin in the water softener. It seems that the appliance is not working. The washing phase starts only after this procedure is completed. The procedure will be repeated periodically.8.1 The salt containerCAUTION! Only use salt specifically designed for dishwashers. The salt is used to recharge the resin in the water softener and to assure good washing results in the daily use. How to fill the salt container 1. Turn the...
Page 13
4.Add the detergent. If you use multi- tablets, activate the option Multitab. 5. Set and start the correct programme for the type of load and the degree of soil.9.1 Using the detergentCAUTION! Only use detergent specifically designed for dishwashers. 1. Press the release button ( A) to open the lid ( C). 2. Put the detergent, in powder or tablets, in the compartment ( B). 3. If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door. 4. Close the lid....
Page 14
Press simultaneously Delay and Option until the appliance is in programme selection mode.Cancelling the programme Press and hold simultaneously Delay and Option until the appliance is in programme selection mode. Make sure that there is detergent in the detergent dispenser before you start a new programme. End of the programme All buttons are inactive except for the on/off button. 1. Press the on/off button or wait for the Auto Off function to automatically deactivate the appliance. If you open the...
Page 15
10.3 What to do if you want to stop using multi-tablets Before you start to use separately detergent, salt and rinse aid do the following procedure. 1. Set the highest level of the water softener. 2. Make sure that the salt and rinse aid containers are full. 3. Start the shortest programme with a rinsing phase. Do not add detergent and do not load the baskets. 4. When the programme is completed, adjust the water softener according to the water hardness in your area. 5. Adjust the released quantity of...
Page 16
1.Turn the filter ( B) counterclockwise and remove it. 2. Remove the filter ( C) out of filter ( B). 3. Remove the flat filter ( A). 4. Wash the filters. 5.Make sure that there are no residues of food or soil in or around the edge of the sump. 6. Put back in place the flat filter ( A). Make sure that it is correctly positioned under the 2 guides. 7. Reassemble the filters ( B) and ( C). 8. Put back the filter ( B) in the flat filter ( A ). Turn it clockwise until it locks. CAUTION! An incorrect position...
Page 17
11.2 Cleaning the spray arms Do not remove the spray arms. If the holes in the spray arms are clogged, remove remaining parts of soil with a thin pointed object.11.3 External cleaning • Clean the appliance with a moist soft cloth. • Only use neutral detergents. • Do not use abrasive products, abrasive cleaning pads or solvents. 11.4 Internal cleaning • Carefully clean the appliance, including the rubber gasket of the door, with a soft moist cloth. • If you regularly use short duration programmes, these...
Page 18
Once you have checked the appliance,deactivate and activate the appliance. Ifthe problem occurs again, contact an Authorised Service Centre.For alarm codes not described in the table, contact an Authorised Service Centre.12.1 The washing and drying results are not satisfactoryProblemPossible solutionThere are whitish streaks or bluish layers on glasses and dishes.• The release quantity of rinse aid is too much. Adjust the rinse aid selector to a lower position. • The quantity of detergent is too...
Page 19
marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office. * ENGLISH19