AEG Cordless stick vacuum AG61A User Manual

Hand Held Vacuum Cleaner (Household Type)
Owner´s Guide
60 - 70 Series
IMPORTANT
For any advice on your cleaner and to order  lters and accessories,
please telephone the AEG Helpline on
+44 (0) 8445 611 611
IMPORTANT INFORMATION .....2-4
GUARANTEE................................. 4
HOW TO ASSEMBLE..................... 4
HOW TO USE .............................5-6
ROUTINE MAINTENANCE ............ 6
DUST CUP ..................................... 6
FILTER ........................................... 6 

To reduce the risk of fire, electric shock, or injury:
This appliance can be used by children aged from 8 years and above and persons with reduced
  physical, sensory or mental capabilities or lack of experience and knowledge if they have been
  given supervision or instruction concerning use of the appliance in a safe way and understand the
  hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall
  not be made by children without supervision.
If the supply cord...

IMPORTANT INFORMATION
3
BEFORE YOU START
CHECK THE VOLTAGE
Before connecting the cleaner to an electrical supply, ensure that the voltage shown on the rating plate located beneath the cleaner is 
of the correct voltage for your electricity supply. If it is not, do not use the cleaner but refer back to your dealer.
CONNECTING TO YOUR ELECTRICITY SUPPLY 
Permanently connected to the cleaner is a mains supply (2-core) cable fitted with a non-rewirable plug incorporating a 13A fuse.
In the event of the fuse...

SERVICE
Should you require service on your AEG cleaner, please telephone AEG  Customer Ser vices on +44 (0) 8445 611 611. Before requesting 
ser vice, please check whether your problem is covered under Ser vice Checklist (see below).
SERVICE CHECKLIST
  If your cleaner will not operate, check the plug connec tion, plug fuse and mains fuse.
• Never allow the dust cup to become so full that it impedes the air-flow, thus reducing the cleaning efficiency of the machine. The 
charac ter of household dust and...

HOW TO ASSEMBLEHOW TO USE
5 Store crevice tool inside the base of the cleaner.
ASSEMBLY PARTS
ASSEMBLY / STORAGE
2
2
2
Riser VisorTM Nozzle Cover
CAUTION:  To prevent injury, turn off the power
                  switch and unplug cleaner before
                  rotating the Riser Visor nozzle. CAUTION: Moving parts. Make sure the power switch
                  is in off  (0) position before plugging in. 
1
1
1
Power Switch
The Riser VisorTM nozzle features a rotating cover over 
the brush roll. When the...

1
2
3
4
The instructions given in this booklet serve as a guide to routine 
maintenance. To avoid unnecessary service calls, check the hose, 
dust cup and dust cup filter often. Clear a clogged hose, empty the 
dust cup if it is full, and clean the dust cup filter when it is dirty.
CAUTION:  Turn off the power switch and unplug the electrical 
cord before emptying the dust cup or cleaning the 
dust cup lter.
CAUTION:  Do not use the cleaner without the dust cup lter 
properly installed. This can damage the...

7
Brush Roll
The brush roll turns to agitate, sweep and comb the carpet
nap. Check the brush roll regularly to be sure it is in top
condition. Cut away any hair or thread wound around the
brush roll because the build-up could cause the brush roll
to rotate unevenly. 
HOW TO MAINTAIN (continued) 

A61M 02 06 01
Part No. 74538
Printed in China(5/04)
101 Oakley Road, LUTON, BEDFORDSHIRE, LU4 9QQ
Features of the AEG vacuum cleaner and accessories supplied with it are protected in Great Britain and abroad by Patents or Registered
Designs.
This appliance conforms with the requirements of the amended E.E.C. directive No. 89/336/EEC relating to electromagnetic compatibility
(EMC) CE.
AEG may introduce modifications to their products from time to time, and consequently the details given in this booklet are...