AEG Compact oven KR8403101M User Manual

Sym-
bolSubmenuDescriptionHeat + HoldKeeps the prepared food warm for 30 minutes af-
ter a cooking cycle finished.Extra TimeActivates and deactivates the time extension
function.Display ContrastAdjusts the display contrast by degrees.Display BrightnessAdjusts the display brightness by degrees.Set LanguageSets the language for the display.Buzzer VolumeAdjusts the volume of press-tones and signals by
degrees.Key TonesActivates and deactivates the tone of the touch
fields. It is not possible to deactivate...

Residual heat
In some heating functions if a
programme with time selection Duration
or End Time is activated and the cooking
time is longer than 30 minutes, the
heating elements deactivate
automatically 10% earlier.Cooking with the lamp off
Deactivate the lamp during the cooking
and activate only when you need it.
Keep food warm
If you want to use the residual heat to
keep the meal warm, choose the lowest
possible temperature setting. The
display shows the residual heat
temperature.7.  MICROWAVE MODE7.1...

Ready meals:
• Ready meals in metal packaging or plastic trays with metal covers can
only be defrosted or heated in the
microwave if they are expressively
designated as suitable for use in the microwave.• You must follow the manufacturer's instructions printed on the packaging
(e.g. remove the metal cover and
pierce the plastic film).Suitable cookware and materialsCookware / MaterialMicrowaveGrillingDefrost-
ingHeatingCookingOvenproof glass and porcelain with
no metal components, e.g. Pyrex,...

Tips for the microwaveResultRemedyYou cannot find details for the amount
of food prepared.Find details for similar type of food. Increase or shorten the length of the cooking time according
to the following rule: double the amount - almost
double the time, half the amount - half the time.The food after cooking is too dry.Set shorter cooking time or select lower micro-
wave power and cover with material suitable for
use in the microwave.The food is still not defrosted, hot or
cooked after the end of...

7.3 Setting the Microwave
function
1. Activate the appliance.
2. Touch 
 to activate the Microwave
function.
3. Touch 
. The function: Duration is
set to 30 seconds and the
microwaves starts to operate.
Each touch of  adds 30
seconds to the time of the
function: Duration.If you do not touch , the
appliance deactivates after
20 seconds.
4. Touch  to set the function:
Duration. Refer to "Setting the clock
functions".
When the time of the
function: Duration is longer
than 7 minutes the
Microwave...

Power settingUse• 1000 Watt
• 900 Watt
• 800 Watt
• 700 WattHeating liquids
Searing at the start of the cooking process
Cooking vegetables
Melting gelatine and butter• 600 Watt
• 500 WattDefrosting and heating frozen meals
Heating one-plate meals
Simmering stews
Cooking egg dishes• 400 Watt
• 300 Watt
• 200 WattContinuing to cook meals
Cooking delicate food
Heating baby food
Simmering rice
Heating delicate food
Melting cheese• 100 WattDefrosting meat, fish, bread
Defrosting cheese, cream, butter...

If you use the clock
functions: Duration, End
Time, the appliance
deactivates the heating
elements after 90 % of the
set time. The appliance uses
the residual heat to continue
the cooking process until the
time ends (3 - 20 minutes).8.2  Setting the clock functionsBefore you use the
functions: Duration, End
Time, you must set a heating
function and temperature
first. The appliance
deactivates automatically.
You can use the functions:
Duration and End Time at
the same time if you want to
automatically...

9.2 Assisted Cooking with
Recipe Automatic
This appliance has a set of recipes you
can use. The recipes are fixed and you
cannot change them.
1. Activate the appliance.
2. Select the menu: Assisted Cooking.
Press 
 to confirm.
3. Select the category and dish. Press to confirm.
4. Select a recipe. Press 
 to confirm.
When you use the function:
Manual, the appliance uses
the automatic settings. You
can change them as with
other functions.10.  USING THE ACCESSORIESWARNING!
Refer to Safety chapters.10.1...

Saving a programme1. Activate the appliance.
2. Set a heating function or an
automatic programme.
3. Touch 
 again and again until the
display shows: SAVE.
4. Press 
 to confirm.
The display shows the first free memory
position.
5. Press 
 to confirm.
6. Enter the name of the programme.
The first letter flashes.
7. Touch 
 or  to change the
letter.
8. Press 
.
The next letter flashes.
9. Do step 7 again as necessary.
10. Press and hold 
 to save.
You can overwrite a memory position.
When the display...

time if a heating function operates andyou do not change any settings.Temperature (°C)Switch-off time (h)30 - 11512.5120 - 1958.5200 - 2305.5The Automatic switch-off
does not work with the
functions: Light, End Time,
Duration.11.6  Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the appliance is deactivated, the brightness of thedisplay is lower between 10 PM and 6
AM.
• Day brightness:
– when the appliance is activated.
– if you touch a symbol during the...