AEG B8871-5-m Manual

							ProblemPossible causeSolution
The oven does not heat upThe fuse is releasedMake sure, if the fuse is the
cause for the malfunction. If
the fuse releases again and
again, refer to an authorized
electrician
The oven lamp does not operateThe oven lamp is defectiveReplace the oven lamp.
The pyrolytic cleaning does
not operate (the clock display
shows „C1“)The shelf runners/telescopic
shelf runners are not removedRemove side rails/oven shelf
runners
The pyrolytic cleaning does
not operate (the time display
shows „C3“)The door is not correctly
closed or door lock is defectiveClose the door correctly
The display shows F11• There is a short circuit of
the meat probe
• The meat probe plug is not
correctly installed into the
meat probe socketInstall the meat probe plug as
far as possible
The display shows F2• The door is not closed cor-
rectly
• The door lock is defect• Close the door correctly
• Switch off the appliance
with the house fuse or the
safety switch in the fuse
box and switch it on again
• If the display shows F2
again, refer to the Custom-
er Care Department
The display shows an error
code that is not in this listThere is an electronic fault• Switch off the appliance
with the house fuse or the
safety switch in the fuse
box and switch it on again
• If the display shows the er-
ror code again, refer to the
Customer Care Department
If you cannot find a solution to the problem yourself, contact your dealer or the service
centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the
front frame of the oven cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................What to do if…
31 
						

							ENVIRONMENT CONCERNS
The symbol    on the product or on its packaging indicates that this product may not
be treated as household waste. Instead it should be taken to the appropriate collection
point for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed information about recycling of this
product, please contact your local council, your household waste disposal service or the
shop where you purchased the product.
Packaging material
The packaging material is environmentally-friendly and recyclable. Plastic parts are
marked with international abbreviations such as PE, PS, etc. Dispose of the packaging ma-
terial in the containers provided for this purpose at your local waste management facility.
WARNING!
Your appliance should be made inoperable before it is disposed of, so that it does not
constitute a danger.
To do this, take the mains plug from the socket and remove the mains cable from the
appliance.
32Environment concerns 
						

							33 
						

							34 
						

							35 
						

							 www.aeg-electrolux.com/shop
   
892946511-A-272010