Home > AEG > Fridge freezer > AEG A 75248 Ga Operating Instructions

AEG A 75248 Ga Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual AEG A 75248 Ga Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 513 AEG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							818 34 59-00/011
    Opening the door
    If the door is closed when the appliance is in operation, it cannot be 
    immediately opened again, because a vacuum occurs which holds the 
    door closed until pressure has been equalised. The door can be opened 
    again after several minutes.
    The no-frost (frost free) system
    The no-frost (frost free) system enables both the freezing of fresh 
    foodstuff as well as the storage of readily frozen foodstuff by cold 
    air. An evaporator cools the air in the interior space of the appliance, 
    which is circulated and uniformly distributed by a ventilator. This 
    uniformly circulating air-flow creates for a dry climate, low 
    temperature fluctuations and low temperature differences in the 
    entire appliance interior. The moisture in the air condenses as frost on 
    the evaporator. The evaporator thaws/defrosts -automatically, as 
    soon as this is necessary. The melted water is drained off outside to 
    the compressor and evaporates through the heat generated by the 
    latter. Thus, the interior of the appliance and the stored cooled or 
    frozen foodstuffs always remain fresh and ice-free. Manual thawing/
    defrosting is not necessary. 
     
    						
    							12818 34 59-00/0
    Description of the appliance
    View of the appliance
    áControl panel
    àInterior Illumination 
    âCold accumulation block (not on all models)
    äCompartments with lids and drawers 
    ãMaxi-Box
    åDrawer (for frozen food storage only) 
    çRating plate
    Cold accumulation block
    There is one cold accumulation block in the freezer.
    Refer to the section “Prior to Initial Start–Up” concerning freezing of 
    the cold accumulation block.
    3 In the event of a power failure or malfunction, the cold accumulation 
    block will increase the hold over period by several hours, providing 
    it is placed in the uppermost drawer, at the front, above the frozen 
    food.
    You can also use the cold accumulation block in a cool bag.
     
    						
    							Description of the appliance
    818 34 59-00/013
    Control Panel
    1ON/OFF button
    2Temperature setting button (for warmer temperatures)
    3Temperature display
    4Temperature setting button (for colder temperatures)
    5FROSTMATIC indicator light (yellow)
    6FROSTMATIC button
    7WARNING indicator light (red)
    8ALARM OFF button (see Control and Information Systems) 
    Temperature setting buttons
    The temperature is adjusted using the 
    „+“ (WARMER) and „-“ (COLDER) buttons.
    These buttons are connected to the temperature display.
     The temperature display is switched over from the display of the 
    ACTUAL temperature (Temperature display is illuminated) to the dis-
    play of the DESIRED temperature (Temperature display flashes) by 
    pressing one of the two buttons, „+“ (WARMER) or „-“ (COLDER).
     Each time one of the two buttons is pressed again the DESIRED tem-
    perature is adjusted by 1 °C.
     If neither button is pressed, the temperature display automatically 
    switches back after a short period (approx. 5 sec.) to the display of 
    the ACTUAL temperature. The ACTUAL temperature in the appliance is 
    now adjusted to match the preset DESIRED temperature.
    DESIRED temperature means:
    The temperature that is required in the appliance, this can be adjusted 
    to the temperatures shown in the display. The DESIRED temperature is 
    indicated by flashing numbers.
    ACTUAL temperature means:
    The temperature display indicates the temperature that is currently 
    present in the appliance. The ACTUAL temperature is indicated with 
    illuminated numbers.
    3 Once the FROSTMATIC function has been switched on the DESIRED 
    temperature that was set originally cannot be changed.
     
     
    						
    							Description of the appliance
    14818 34 59-00/0
    Temperature display
    The temperature display shows several types of 
    information.
     In normal operation the current freezer compartment temperature is 
    displayed (ACTUAL temperature). 
     During temperature adjustment, a flashing display of the 
    temperature selected at the moment occurs (DESIRED temperature). 
     In the event that frozen food has been partially or totally defrosted, 
    perhaps as the result of a lengthy power failure and if the ALARM OFF 
    button is activated the temperature display will show the warmest 
    temperature the frozen food has reached on restoration of the power 
    supply.
     If there is a fault in the appliance a square will appear in the temper-
    ature display.
    FROSTMATIC-button
    The FROSTMATIC function provides for quick freezing of 
    fresh food products, and at the same time protects pre-
    viously stored goods against undesired warming in the 
    freezer compartment. 
    0 1.The FROSTMATIC function is switched on by pressing the FROSTMATIC 
    button. The yellow light illuminates. The compressor runs continuously. 
    2.The FROSTMATIC function can be ended manually at any time by press-
    ing the FROSTMATIC button again. The yellow light goes out.
    If the FROSTMATIC function is not ended manually, the appliance elec-
    tronics switch off the FROSTMATIC function after approx. 50 hours. The 
    yellow light goes out.
    Important! Once the FROSTMATIC function has been switched on the 
    DESIRED temperature that was set originally cannot be changed.
     
    ALARM OFF button
    With the ALARM OFF button, the acoustic warning signal 
    can be switched off, e.g. the Open Door warning when 
    sorting in or out, the food to be frozen. 
    When there is a temperature warning, if the ALARM OFF button is acti-
    vated, the temperature display will show the warmest temperature the 
    frozen food has reached. 
     
    						
    							818 34 59-00/015
    Prior to Initial Start–Up
    1 Before connecting the appliance to the mains and putting it into oper-
    ation for the first time, leave the appliance to stand for 30 minutes if 
    was transported upright. After transport on its side, the appliance must 
    be left to stand for 2 hours before putting it into operation. This is nec-
    essary to allow the refrigerant to flow back into the compressor. Other-
    wise the compressor may be damaged.
    0 1.Please clean the appliance interior and all accessories prior to initial 
    start-up (see section: “Maintenance and Cleaning”).
    2.The appliance must be correctly installed in accordance with the chap-
    ter Installation before it is put into operation for the first time. Care 
    should be especially taken that the mains voltage and frequency avail-
    able correspond with the appliance’s rating plate. 
    3.Remove the cold accumulation block from the appliance.
    4.Only put the cold accumulation block to freeze in the top compartment 
    after the optimal storage temperature of –18 °C has been reached.
    5.After 24 hours place the cold accumulation block in the uppermost 
    compartment, at the front, above the frozen food.
    6.Re-freeze the thawed cold accumulation block in the same way, e. g. 
    after cleaning the appliance.
    Initial use
    0 1.Insert plug into mains socket.
    2.Press the ON/OFF button. 
    A warning tone sounds and the red warning light flashes indicating 
    that the required storage temperature has not yet been reached. 
    3.Press the ALARM OFF button to switch off the warning tone.
    4.Set temperature to -18°C or colder (see section: Temperature Adjust-
    ment).
    Important! Wait until the freezer compartment has reached a tempera-
    ture of –18 °C, or the red warning light has gone out, before storing 
    frozen food.
     
    						
    							16818 34 59-00/0
    Temperature Adjustment
    0 1.Press either the „+“ (WARMER) or „-“ (COLDER) button.
    The temperature display switches over and the DESIRED temperature 
    currently set flashes on the temperature display.
    2.To adjust to a warmer temperature, press the „+“ (WARMER) button. To 
    adjust to a colder temperature, press the „-“ (COLDER) button. The 
    changed setting is immediately displayed on the temperature display.
    Each time one of the two buttons is pressed again the DESIRED temper-
    ature is adjusted by 1 °C.
    Temperature range that can be set: -15 °C to -24 °C. 
    Note: From a food safety point of view, -18 °C for the freezer compart-
    ment should be considered cold enough as a storage temperature.
    3 If the buttons are not pressed again for approx. 5 seconds the tempera-
    ture display will change from the DESIRED temperature to the ACTUAL 
    temperature. The display changes from flashing to illuminated num-
    bers.
    Important!  Please check red warning display and temperature display 
    regularly to ensure maintenance of the storage temperature. 
     
    						
    							818 34 59-00/017
    Switching the Appliance Off
    In order to protect frozen goods, the appliance is guarded against 
    accidental switching off (child-proof).
    0 1.To switch off press and hold the ON/OFF button for approx. 5 seconds. 
    A so-called count down is started in the temperature display, which 
    counts backwards from 3 to 1. After 1 is reached the appliance 
    switches off. Illumination at the temperature display goes off.
    3 The appliance is only completely disconnected from the electricity 
    supply when the power plug has been removed from the power outlet.
    Note:
    The appliance cannot be switched on or off if unplugged, or if there is 
    no power being supplied to it.
    Following connection to the mains power supply, the appliance returns 
    to the same operating state as before the interruption of main power.
    If the appliance is not going to be used for an extended period:
    0 1.Switch appliance off by pressing and holding the ON/OFF button for 
    approximately 5 seconds (see above).
    2.Unplug or switch off at the mains supply.
    3.Clean thoroughly (see section: Maintenance and Cleaning).
    4.Leave door open to avoid accumulation of odours.
     
    						
    							18818 34 59-00/0
    Control and Information Systems
    The control and information systems consist of the temperature display, 
    an optical warning display and an acoustic warning.
    The system warns:
    – when first switching on the appliance (when the storage temperature 
    has not yet been attained);
    – if the appliance door remains open for longer than 80 seconds;
    – of excessive temperature in the freezer compartment;
    – if there are functional errors with the appliance.
    Open Door Warning 
    If the door remains open longer than approx. 80 seconds, the red 
    warning indicator flashes and a warning tone sounds. If you need more 
    time for sorting or rearranging frozen foodstuff, you can switch off 
    warning tone for 80 seconds by pressing the ALARM OFF button. 
    The red warning indicator will go out when the door is closed.
    Temperature Warning
    The red warning display and the temperature display flashes and an 
    audible warning sounds, as soon as the temperature in the freezer com-
    partment is warmer than -11 °C. 
    A rise in temperature may be caused by:
    – frequent door opening for long periods of time;
    – loading with large quantities of warm foods;
    – high ambient temperature;
    – an error with the appliance.
    0 1.You can cancel the warning tone with the ALARM OFF button. 
    The temperature display for the freezer indicates the warmest 
    temperature the freezer has reached during the temperature alarm 
    period. After approx. 5 seconds the temperature display reverts to the 
    current freezer temperature. The red warning indicator will switch off 
    as soon as the temperature has dropped to under -11 °C.
     
    						
    							818 34 59-00/019
    Temperature memory
    3 While the current freezer temperature is above -11 °C, the warmest 
    temperature the freezer has reached during the alarm period is stored 
    and can be called up as often as wished by pressing the ALARM OFF 
    button.
    If the temperature in the freezer compartment drops to under -11 °C 
    and the ALARM OFF button has not been pressed prior, the warning 
    tone will switch off automatically. The red warning indicator and the 
    temperature display will continue to flash. 
    If the ALARM OFF button is pressed now, the red warning indicator 
    switches off. In addition, the temperature display will show for five sec-
    onds the highest temperature the frozen food has warmed to. Then the 
    display will change to the current freezer temperature. The stored high-
    est temperature is now erased.
    Attention! If suspicion of partial or complete thawing exists, please 
    check the quality of the foods to determine if they can be used.
    Function Errors
    If the appliance electronics detects a technical fault that needs to be 
    rectified by customer service, the temperature display shows a square in 
    the temperature display of the freezer. The red warning indicator 
    flashes. The appliance will continue to operate in emergency mode.
    Opening the door
    If the door is closed when the appliance is in operation, it cannot be 
    immediately opened again, because a vacuum occurs which holds the 
    door closed until pressure has been equalised. The door can be opened 
    again after several minutes.
     
    						
    							20818 34 59-00/0
    Freezing
    Except for the bottom drawer, which serves for storage purposes, all 
    compartments and drawers are suited for freezing small quantities of 
    fresh food. The two upper compartments are suited for freezing of 
    large quantities of food.
    Important! 
     The temperature in the freezer compartment must be –18 °C or 
    colder before freezing food.
     Please observe the freezing capacity given on the rating plate. The 
    freezing capacity is the maximum quantity of fresh food that can be 
    frozen within a period of 24 hours. If you wish to freeze food several 
    days in a row, please observe a maximum capacity of only 2/3 to 3/4 
    of that on the rating plate.
     Allow warm food to cool down before freezing. The warmth will 
    cause increased ice formation and increase the power consumption.
     When freezing large quantities of food, place the frozen cold accu-
    mulation block at the top of the cold food.
     Thawed foods which have not been processed further (cooked into 
    meals) may not under any circumstances be frozen a second time.
    0 1.When freezing maximum capacity press the FROSTMATIC button 24 
    hours prior to freezing, or 4 to 6 hours for smaller quantities. The yel-
    low indicator light illuminates.
    3 The FROSTMATIC button need not be pressed for freezing of small 
    quantities of up to 3 kg.
    2.All foods must be packed air tight prior to freezing, so that they do not 
    dry out or lose their flavour, and so that no flavour contamination of 
    other frozen goods occurs.
    Caution! Do not touch frozen food with wet hands. Your hands could 
    freeze to the food.
    3.Place the packed food in the drawers. Unfrozen food must not touch 
    items already frozen, otherwise the frozen food could begin to defrost.
    3 The appliance electronics automatically switch the FROSTMATIC func-
    tion off after a period of 50 hours. Yellow indicator light goes out. You 
    can also stop the FROSTMATIC function manually by pressing the 
    FROSTMATIC button again.
     
    						
    All AEG manuals Comments (0)

    Related Manuals for AEG A 75248 Ga Operating Instructions