Advidia A54 OD Dome Camera Quick Start Guide

Network Dome Camera · Quick Start Guide 
 20 
20 
3 Setting the Network Camera over the 
LAN 
Purpose: 
To view and configure the camera via LAN (Local Area Network), you need to connect the network camera in the same subnet with your 
PC. Then, install the Advidia Camera Finder Utility to search and change the IP of network camera. 
 The following figure shows the cable connection of network camera and PC: 
 
Figure 3-1 Wiring over LAN 
 Set the IP address of the camera for accessing via LAN. 
Steps:...

Network Dome Camera · Quick Start Guide 
 21 
21 Refer to the following introductions to set IP address with the Advidia Camera Finder Utility software (for more detailed 
instructions please download the Camera Finder manual from the Advidia Website www.advidia.com/support): 
 After launching the Advidia Camera Finder software, it automatically searches the online devices from the subnet where 
your computer is located.  This search may take 30 seconds or more depending on network size. After searching...

Network Dome Camera · Quick Start Guide 
 22 
22 
Click the refresh icon  to refresh the online device list manually. 
The newly discovered devices will be added to the list. 
Note: 
You can click on each column heading to order the information. 
 Modify device information 
Steps: 
1). Select the device(s) to be modified in the device list as shown in Figure 3-3.  
2). Click on “File” and select “Login Manager ” as shown in 
Figure 3-4 to enter the username and password information of selected...

Network Dome Camera · Quick Start Guide 
 23 
23  
 
 
 
 
Figure 3-4 Login Manager 
 
 
Figure 3-5 Launch Edit Table 
  

Network Dome Camera · Quick Start Guide 
 24 
24 
 
Figure 3-6 Edit Table 
5) Enter the desired IP address (or range if changing the IP address of more than one device) of the network camera in the address 
field of the edit table and click Apply Network Changes. You can also select “Dynamic IP” if you would prefer to have an IP address assigned by your network router. 
 
 The default value of the IP address is “192.0.0.64”. The default 
user name is “admin”, and password is “12345”. For security...

Network Dome Camera · Quick Start Guide 
 25 
25 
4 Accessing via Web Browser 
System Requirement: 
Operating System: Microsoft Windows XP SP1 and above version / Vista / Win7 / Server 2003 / Server 2008 32bits 
CPU: Intel Pentium IV 3.0 GHz or higher 
RAM: 1G or higher 
Display: 1024×768 resolution or higher 
Web Browser: Internet Explorer 6.0 and above version, Apple Safari 5.02 and above version, Mozilla Firefox 3.5 and above version and 
Google Chrome8 and above version 
Steps: 
1) Open the web...

Network Dome Camera · Quick Start Guide 
 26 
26 
 
Figure 4-1 Login Interface 
5) Install the plug-in before viewing the live video and managing the camera. Please follow the installation prompts to install the 
plug-in. 
Note: 
You may have to close the web browser to finish the installation of the plug-in.  

Network Dome Camera · Quick Start Guide 
 27 
27 
 
Figure 4-2 Download Plug-in 
 
Figure 4-3 Install Plug-in   

Network Dome Camera · Quick Start Guide 
 28 
28 
 
Figure 4-4 Install Plug-in  
6) Reopen the web browser after the installation of the plug-in and repeat the above steps 2-4 to login. 
Note: 
For detailed instructions of further configuration, please refer to the camera’s user man