ADT Security Services Simon XTi User Manual

							Disposal 
Dispose of all equipment is accordance with local requirements. 
Contact your installer for more information. 
Sensor and module locations 
Use  Table 15  below  to list your sensor and module locations. 
Table 15: Sensor and module locations 
Sensor number Sensor name Sensor type Location 
Example  Front door Door/window sensor  Front door 
1.     
2.    
3.    
4.    
5.    
6.    
7.    
8.    
9.    
10.    
11.    
12.    
13.    
14.    
15.    
16.    
17.    
18.    
19.    
20.    
21.    
22.    
23.    
24.    
25.     
						

							Sensor number  Sensor name  Sensor type Location 
26.    
27.    
28.    
29.    
30.    
31.    
32.    
33.    
34.    
35.    
36.    
37.    
38.    
39.    
40.    
Access codes 
Use Table 16  below  to record your access codes. 
Table 16: Access codes 
Code description Code 
Master code   
User code 1  
User code 2  
User code 3  
User code 4  
User code 5  
User code 6  
User code 7  
User code 8  
Duress code  
Delays 
Use Table 17  on page 39  to record your delay times.  
						

							 
Simon XTi User Manual  39 
Table 17: Delays 
Delay Time 
Exit delay  
Entry delay   
Simon XTi system quick reference 
 
Task Instructions 
Level 1: Disarm the 
system Control panel: Press PRESS TO DISARM and enter your access code. 
Key fob: Press Unlock. 
Telephone: Press 1. 
Level 2: Arm doors and 
windows Control panel: Press PRESS TO ARM, then press Doors + Windows Only and 
enter your access code (if required). 
Key fob: Press Lock. 
Telephone: Press 2. 
Level 3: Arm motion 
sensors Control panel: Press PRESS TO ARM, then press Motion Sensors Only and 
enter your access code (if required). 
Telephone: Press 3. 
Level 4: Arm doors, 
windows, and motions Control panel: Press PRESS TO ARM, then press Arm All and enter your code 
(if required) 
Key fob: Press Lock twice. 
Telephone: Press 2 3. 
Activate no delay 
Control panel: Press PRESS TO ARM, set Entry Delay to OFF, then press 
Doors+Windows Only. 
Key fob: Press Lock. 
Telephone: Press 2 3. 
Activate panic alarm  Control panel: Enter the Emergency Screen and press Panic, Police, or Fire. 
Key fob: Press and hold Lock and Unlock for 3 seconds. 
Check system status  Control Panel: Enter the Status & Settings screen and press the Listen icon 
by Panel Status. 
Telephone: Press 0. 
Toggle chime or special 
chime mode  Control panel: Enter the Status & Settings menu and scroll to Chime or 
Special Chime, press On or Off to set the value. 
Bypass a sensor 
Control panel: Enter the Status & Settings menu, scroll to Direct Bypass 
Press ENTER, enter your master code, scroll to the sensor, and then press  
BYPASSED or NOT BYPASSED to set the value.