ADT Security Services Power864 User Manual

Glossary: Fire Escape Planning
27
Entry/exit 
doorsYour installer will program the doors you usually use to enter or exit the premises 
as entry/exit doors. These doors will be programmed to have entry and exit delays. 
Keypads will normally be placed near the entry/exit delay doors for easy access to 
arming/disarming functions.
Event bufferThe event buffer contains a list of the last 256 events that have occurred on your 
system. You must be at an LCD5500Z keypad to view the event buffer.
Exit delayA...

28
System Information
Fill out the following information for future reference and store this guide in a safe place.
For Service
Central Station Information:
Account #: ______________________________ Telephone #: ____________________________
Installer Information:
Company: _______________________________ Telephone #: ____________________________
Access Codes
Your Master Code is:____________________________
Additional Access Codes:
System Information
[F] FIRE _____________________________________
[A]...

System Information: Zone Information
29
Zone Information
There are ________ active zones on the system.
Zone Protected Area Zone Type Zone Protected Area Zone Type
01 33
02 34
03 35
04 36
05 37
06 38
07 39
08 40
09 41
10 42
11 43
12 44
13 45
14 46
15 47
16 48
17 49
18 50
19 51
20 52
21 53
22 54
23 55
24 56
25 57
26 58
27 59
28 60
29 61
30 62
31 63
32 64 

30 

31
Index
A
Access codes
adding 
21
changing 
21
defined 
26
erasing 
22
Master code 
27
programming 
21
Alarm
defined 
26
false 
12
fire 
12
intrusion 
13
memory 
13
viewing 
13
Arming
automatic 
10
away 
7
getting ready 
6
no entry delay 
9
quick 
9
stay 
8
Automatic arming 
10
Auxiliary keys 
14
Away
arming 
7
B
Bells
testing 
18
Buttons on keypad 
1
Bypass group 
16
Bypassing zones 
15
C
Central station 
5
defined 
26
Cleaning the system 
5
Codes See Access codes
Computer access to system 19
D
Date...

32
Limited Warranty
Digital Security Controls Ltd. warrants the original purchaser that for a period of
twelve months from the date of purchase, the product shall be free of defects in
materials and workmanship under normal use. During the warranty period, Digital
Security Controls Ltd. shall, at its option, repair or replace any defective product
upon return of the product to its factory, at no charge for labour and materials. Any
replacement and/or repaired parts are warranted for the remainder of the...

:
33
WAR NING Please Read Carefully
Note to InstallersThis warning contains vital information. As the only individual in contact with
system users, it is your responsibility to bring each item in this warning to the
attention of the users of this system.
System FailuresThis system has been carefully designed to be as effective as possible. There are
circumstances, however, involving f ire, burglary, or other types of emergencies
where it may not provide protection. Any alarm system of any type may be...

34
FCC COMPLIANCE STATEMENT
CAUTION: Changes or modifications not expressly
approved by Digital Security Controls Ltd. could void your
authority to use this equipment.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installa-
tion. This equipment generates, uses and can radiate radio
frequency energy and, if not...

:
35
Industry Canada Statement
AVIS:  L’étiquette de l’Industrie Canada identifie le matériel
homologué.  Cette étiquette certifie que le matériel est con-
forme à certaines normes de protection, d’exploitation et de
sécurité des réseaux de télécommunications.  Industrie Can-
ada n’assure toutefois pas que le matériel fonctionnera à la
satisfaction de l’utilisateur.
Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’il est
permis de le raccorder aux installations de l’entreprise locale
de...

©2000 Digital Security Controls Ltd.
Toronto  Canada  www.dsc.com
Printed in Canada  29005267 R001