Addonics Technologies USB 31 or 37 ADU3ESA user guide

							Technical Support
If you need any assistance to get your unit functioning properly, please have your 
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v3.1.11
T E C H N O L O G I E S
www.addonics.com
User Guide
USB 3.0 to eSATAp Adapter(ADU3ESA)         
						

							www.addonics.com
Phone:   408-573-8580
Fax:     408-573-8588
Email:   http://www.addonics.com/sales/query/
CONTACT US
Type of USB Port:
USB 3.0 - Green Power LED
USB 2.0 - Orange Power LED
Drive Activity LED:
Blinking red color if there is drive activity on the eSATA storage device connected to 
the USB3.0 to eSATAp adapter.
Note: The USB3.0 to eSATAp adapter is compatible with hardware port multipliers 
where the hard drives are configured as a single raid volume. The current firmware of 
the USB3.0 to eSATAp adapter also supports individual hard drive mode when 
connected to the Addonics HPM-XA.  In this mode, the system sees a single USB 
device with multiple drive letters.  Removing any of the storage units (\
or drive letters) 
associated with the single USB device forces the USB to reset with the r\
educed 
number of drives.  During the reset, any ongoing drive activities for other drives 
connecting to the USB 3.0 adapter will be terminated.  So it’s important to make sure 
all drives are inactive before removing any device from the port multiplier connecting 
to the USB 3.0 - eSATAp adapter.
Drive Activity  LED
Power LED
eSATAp (Hybrid eSATA) port for
connecting eSATA or eSATAp
storage device To any Computer/System USB3.0/2.0 Port
(Optional) USB Extension Cable to Computer/System