Addonics Technologies Saturn Cipher 35 IDE saturn cipher chd User Manual

							Addonics Technologies Saturn Cipher Combo Hard Drive User Guide 
 
10
Chapter 6 Attaching USIB interface cable  
 
 
 
 
 
 
 
 
 
 
 
 
 
  
 
 
 
Be sure the Saturn cipher key is inserted into the dr ive enclosure prior to 
turning on th e power or attachi ng the USIB  interface cable to the co mputer. 
Hard drive will not be detected if the interface cable is attached to the 
computer without the Cipher key inserted first.  Under such condition, the 
power to the drive enclosure will have to be turned off  and turned back on 
with the Ciph er key already  inserted into the drive enclosure in order for the 
hard dri ve to be detec ted by the system. 
 
The Saturn Cipher drive enclosure can be use d as an internal removab le hard 
drive or as a drive cartridge by  installing the optional drive cradle into the 
drive bay o f a Desktop, Server or any computing equipment.  For m ore detail 
of these options, visit the Saturn Cipher page on Addonics we b site 
www.addonics.com. 
  
						

							Addonics Technologies Saturn Cipher Combo Hard Drive User Guide 
 
11
Chapter 7    Saturn IDE Drive cradle 
 
Overview 
Drive cradle, also known as fixed tray, is the frame that mounts inside the 
drive bay of a Deskto p, Server or any computing equipment. T he drive cradle 
provides both power and da ta connection betwee n the computer and the drive 
enclosure.   
 
The Saturn  IDE Drive cradle fits into any standard 5 ¼ ” drive bay and 
connects to the computer via IDE interface. The Satur n IDE drive cradle is 
compatible with all Saturn  Drive enclosures and Saturn Cipher Drive 
enclosures. As a r esult you can insert SATA or IDE hard dri ve, encrypted or 
unencrypted, into the same drive cradle of a computer.  
 
Building a hot swap drive bay 
You can change th e IDE connection of the drive cradle to USB  2.0 or SATA 
by attaching an Addonics IO converter – IDE-USB, IDE-SATA, or the IDE-
USIB co nnector board to the 40-pin  IDE connector on back of  the drive 
cradle. Wh en the power input of these IO c onverters is connected to the 
unique power sensing connector on the back of the Saturn IDE dr ive cradle, 
you can have hot swap capability o f the hard drives, just like using a tape 
cartr idge sys tem, without shuttin g down the computer. 
 
To learn about the full family of Addo nics IO converters, please visit 
www.addoni cs.com/product/io/ 
  
						

							Addonics Technologies Saturn Cipher Combo Hard Drive User Guide 
 
12
Chapter 8 Drive Cradle installation and using the Saturn 
Combo Hard Drive 
 
Insert the IDE drive cradle into a standar d 5 ¼” drive bay of a co mputer 
and secure th e drive cradle to the dr ive bay with 4 screws (already 
included with th e drive cradle), 2 on each side of the drive bay. 
 
 
 
 
Be sure the Saturn cipher key is inserted into the drive enclosure prior to 
turning on t he power of the drive cradle. Hard drive will not be detected b y 
the computer if the power to the drive cradle is turned on without the Cipher 
key. Under such condition, th e system has to be restarted with the Cipher key 
already inserted into the dri ve enclosure in order to detect the har d drive. 
 
The key lock of the drive cradle must be in  the lock position in order to get 
power to the hard drive. This also locks the drive enclosure inside the drive 
cradle. 
 
Once the drive is detected b y the system OS, the Satur n Cipher key may b e 
removed from the drive enclosure.  The Saturn  Cipher hard drive will 
continue operati ng normally till i t is removed from the system o r powered off. 
  
						

							Addonics Technologies Saturn Cipher Combo Hard Drive User Guide 
 
13
Chapter 9    USIB interface cable installation 
 
USB 2.0 USIB interface cable  
  
Ø Since USB 2.0 Hi-Speed is an evolution of the existing  USB 1.1 
specification, it is fully forward and backward compatible with 
current USB sys tems.  
 
Ø If you do not have an USB2.0 port, you may install an  optional 
USB2.0 adapter or controller  
             
USB driver installation 
For Win98 and Win98SE  
 
1. Make sure your computer is up and running. 
2. Insert the USB cable to the USB  Port. 
3. A New Hardware Found message shall pops up.  
4. Follow w izard and poin t to the location of the driver. (Follow the 
steps from the Dri ver Disc to where yo u saved the driver files) 
5. Let Windows finish the installation and that’s it. 
6. Double click My  Computer icon and t here should be an extr a drive 
letter for the Saturn Cipher ExDrive. 
7. You may now access the drive. 
 
    Note: Saturn Cipher ExDrive is Plug and play under Windows  XP, and 
Me, 2000. There is no third party driver needed. 
 
              Brand New Har d drive must be Partitioned and Fo rmatted first.
            
						

							Addonics Technologies Saturn Cipher Combo Hard Drive User Guide 
 
14
 
eSATA USIB interface cable  
 
 
     
 
 
eSATA Saturn Cipher ExDrive Installation 
 For Win98SE, Me, 2000 and XP 
 
 
Note: There no drivers needed to use the Serial ATA cable as long as the 
drivers are installed for the Serial ATA Controller card/chip. It is plug and 
play. 
 
  
 
 
Note: Brand New Hard drive must be Partitioned and Form atted first.
  
 
 
 
 
 
 
 
  
						

							Addonics Technologies Saturn Cipher Combo Hard Drive User Guide 
 
15
 
 
Technical Support 
 
If you need assistan ce to get your unit functionin g properly, please call 
Addonics Technical Support .  Our technical staff will be happy to  assist you, 
but they will need your help to do so.  Calling th e technical support staff 
without all the proper information can be both time consuming and 
frustrating.  Here are some tips to help yo u out: 
 
(1) MODEL NUMBER – Please have this number on hand. 
(2) SYSTEM INFORMATION – Type of computer, periph erals, etc. 
(3)   OPERATING SYSTEM – What version of Windows   
(4)   WHAT’S THE TROUBLE? – Give enough information  
About your problem so that we can recreate an d diagnose it. 
 
FREE Software Drivers for all Addonics Technologies 
Products are available 24 hours per day at the  
World Wide Web Site: www.addonics.com. 
 
Contact Information 
 
Addonics Technologies 
2466 Kruse Drive 
San Jose CA, 95131 
 
Phone:  408-433-3899 
Fax:  408-433-3898 
Email:  [email protected] 
Internet:  http://www.addonics.com 
 
TECHNICAL SUPPORT 
Phone:  408-433-3855 
Hours:  8:30-6:00 PST 
Email:  [email protected]