Addonics Technologies SATA eSATA Mini SAS AD2SA3GPX1 user guide

							Specifications
Chip Set:  Silicon Image Sil3132 Integrated Host Controller
Interface:  PCI-Express Bus Compatible
I/O Ports:  2 SATA Ports
Regulatory approvals:  FCC, CE
Features:
•  Supports Serial ATA Generation 2 transfer rate of 3.0 Gbps (300 Mb/s)
•  Supports First-Party DMA Commands for NCQ (Native Command Queuing)
•  Supports 1-lane 2.5Gbps PCI Express
•  Supports RAID0, 1, 5, and 10 using Silicon Image SATARAID5 Array Manager
•  Supports individual drive mode
•  Fully compliant with Serial ATA 1.0a and Serial ATA II Extensions to Serial ATA 1.0a Specifications  
   revision 1.1
•  Hot-plug capability
•  Port Multiplier Compatible
T E C H N O L O G I E S
User Guide
2 Ports SATA II RAID5/JBOD
PCI Express Controller
(AD2SA3GPX1)
Technical Support
If  you  need  any  assistance  to  get  your  unit  functioning  properly,  please  have  your 
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v4.1.11         
						

							www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
RAID Described:
Stripe (RAID 0): Greatly increases the performance of data transfer by simultaneously writing data to 2 
or more drives.
Mirror (RAID 1): Duplicates or mirrors the data on both drives. No data will be lost if one of the drives 
fails.
Mirror-Striping (RAID 1+0): Combined both Striping and Mirroring technologies to provide both the 
performance enhancements that come from Striping and the data availability and integrity that come 
from Mirroring.
Parity (RAID 5): Adds fault tolerant to disk striping by including parity information with the data.
Installation: 
Software Installation:Note: Install the SATARAID5 array manager utility from the CD that came with your package first before 
installing the SATA Host Controller.
A.  From the CD start-up menu select Auto Play > SATA RAID Utilities > Model #AD2SA3GPX1.
B.  Unzip the file on your drive. Folder name is SATARAID5_Utility_3132.
C.  On the GUI folder install 3132-W-I32-R_15180b.msi  (SATARAID5 software).
D.  From the CD start-up menu select SATA Adapters > Model # AD2SA3GPX1.
E.  Unzip the file on your drive. Folder name is 3132r5.
Hardware Installation: 
1.  Power off PC and remove its cover.
2.  Select an empty PCI-E slot and insert the SATA host controller.
3.  Makes sure to secure the bracket with a screw.
4.  Close the PC’s cover.
Windows 2000, XP, 2003, 2008 Server Driver Installation:1.  Turn computer ON. When Windows boots up, “A New Hardware Found” pops on the screen  
  and the Addonics Serial ATA PCI Host Controller is identified.
2.  At the “Add New Hardware Wizard Window, click “Next”
3.  Choose “Select for the best driver for your devices”, and click “Next” 
4.  Navigate to the folder where you extracted the 3124r5 driver.
5.  If using a driver that has not been digitally signed by Microsoft, you will be asked if you want  
  to continue the installation. Click Continue.
6.  When the new hardware wizard has finish installing the Serial ATA card. Click “Finish” to  
  complete the installations.
Confirming Serial ATA Driver Installation:1.  Right click the My Computer icon and select Manage.
2.  Click Device Manager in the Menu Tree.
3.  Click the “+” sign in front of SCSI controllers. Silicon Image SoftRAID5 controller should  
  appear.
Important Note:•  To do a RAID SET with 2 SATA drives directly connected to the SATA ports on the controller            
  card, you can press F4 or CTRL+S from the boot up screen. Read and follow the instruction  
  inside the BIOS screen.
•  You can also install the SATA GUI utility under Windows to monitor the RAID Set. It is under  
  the Utility section of the driver disc.
•  If you have a port multiplier (PM) with 5 drives and connect the PM to the SATA controller  
  card, in the RAID BIOS of the SATA controller card, it will only display 1 drive and that is the  
  drive connected to port 1 on the PM. To see all 5 drives, you would need to be inside the  
  operating system disk utility.