Home
>
Addonics Technologies
>
Raid Tower
>
Addonics Technologies Sapphire RAID enclosures S4SHU3 User Manual
Addonics Technologies Sapphire RAID enclosures S4SHU3 User Manual
Have a look at the manual Addonics Technologies Sapphire RAID enclosures S4SHU3 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 299 Addonics Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 3
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Installation
1. Install drives as described in the Disk Installation section.
2. Connect the AC power adapter’s input to a wall outlet and the output
cable to the power connector.
3. Connect either the USB 3.0 or eSATA cable from the Sapphire Snap-In
Disk Array to the computer.
4. Configure the Port Multilpier as described in the Port Multiplier sec\
tion.
5. Turn on the...](http://img.usermanuals.tech/thumb/181/2442/w64_sapphire-raid-enclosures-s4shu3-1478565661_d-2.png "Page 3
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Installation
1. Install drives as described in the Disk Installation section.
2. Connect the AC power adapter’s input to a wall outlet and the output
cable to the power connector.
3. Connect either the USB 3.0 or eSATA cable from the Sapphire Snap-In
Disk Array to the computer.
4. Configure the Port Multilpier as described in the Port Multiplier sec\
tion.
5. Turn on the...")
![Page 9
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Next, click the Basic RAID Configuration tab and select the type of RAID\
desired. Note that RAID 1 is currently disabled as an option since more \
than two individual drives are available, and DELETE ALL RAID is
disabled since there are currently no arrays to delete. Shown below is
the same set of drives being selected as a LARGE array.
Finally, click Apply. The Jmicron RAID...](http://img.usermanuals.tech/thumb/181/2442/w64_sapphire-raid-enclosures-s4shu3-1478565661_d-8.png "Page 9
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Next, click the Basic RAID Configuration tab and select the type of RAID\
desired. Note that RAID 1 is currently disabled as an option since more \
than two individual drives are available, and DELETE ALL RAID is
disabled since there are currently no arrays to delete. Shown below is
the same set of drives being selected as a LARGE array.
Finally, click Apply. The Jmicron RAID...")
![Page 10
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
The RAID and Disk Information screen (shown when the program was
launched) will now show the Port Multiplier with an Array. The drives are
now listed as M0-M4, indicating they are members of the array. If spares
are present (individual drives added later, and the EZ switch is in the
OFF position), they would be listed as S0, S1, etc. On the right pane, \
the
RAID Level, status,...](http://img.usermanuals.tech/thumb/181/2442/w64_sapphire-raid-enclosures-s4shu3-1478565661_d-9.png "Page 10
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
The RAID and Disk Information screen (shown when the program was
launched) will now show the Port Multiplier with an Array. The drives are
now listed as M0-M4, indicating they are members of the array. If spares
are present (individual drives added later, and the EZ switch is in the
OFF position), they would be listed as S0, S1, etc. On the right pane, \
the
RAID Level, status,...")
www.addonics.com Phone: 408-573-8580 Fax: 408-573-8588 Email: http://www.addonics.com/sales/query/ CONTACT US