Home
>
Addonics Technologies
>
Raid Tower
>
Addonics Technologies RAID Tower V RT5835HEU3 user guide web
Addonics Technologies RAID Tower V RT5835HEU3 user guide web
Here you can view all the pages of manual Addonics Technologies RAID Tower V RT5835HEU3 user guide web. The Addonics Technologies manuals for Raid Tower are available online for free. You can easily download all the documents as PDF.
Page 1
Technical Support If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at: Hours: 8:30 am - 6:00 pm PST Phone: 408-453-6212 Email: http://www.addonics.com/support/query/ v5.1.11 www.addonics.com T E C H N O L O G I E S User Guide RAID Tower V (RT5835HEU3)
Page 2
![Page 2
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Removing Cover of Raid Tower V
Loosen the 3 screws at the back of the tower using a Philips screwdriver. Push cover
toward the rear of the tower and lift slightly to disengage and remove.\
Arrays
The RT5835HEU3 contains two individual Port
Multipliers, each managing an array of four
drives. Array 1 includes the four drives on the
left of the Disk Array 5SA, and Array 2 includes...](http://img.usermanuals.tech/thumb/181/2421/w300_raid-tower-v-rt5835heu3-user-guide-web-1478564401_d-1.png "Page 2
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Removing Cover of Raid Tower V
Loosen the 3 screws at the back of the tower using a Philips screwdriver. Push cover
toward the rear of the tower and lift slightly to disengage and remove.\
Arrays
The RT5835HEU3 contains two individual Port
Multipliers, each managing an array of four
drives. Array 1 includes the four drives on the
left of the Disk Array 5SA, and Array 2 includes...")
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ Removing Cover of Raid Tower V Loosen the 3 screws at the back of the tower using a Philips screwdriver. Push cover toward the rear of the tower and lift slightly to disengage and remove.\ Arrays The RT5835HEU3 contains two individual Port Multipliers, each managing an array of four drives. Array 1 includes the four drives on the left of the Disk Array 5SA, and Array 2 includes...
Page 3
![Page 3
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Resetting the RAID Mode
NOTE: This procedure destroys all RAID data. It should not harm individual drives
or their contents; however, creating or running backups of all data is strongly
recommended before proceeding.
1. Power down the unit and set the dip switch to the factory default settin\
g (all
switches OFF).
2. While holding the SET button with a ballpoint pen, turn the...](http://img.usermanuals.tech/thumb/181/2421/w300_raid-tower-v-rt5835heu3-user-guide-web-1478564401_d-2.png "Page 3
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Resetting the RAID Mode
NOTE: This procedure destroys all RAID data. It should not harm individual drives
or their contents; however, creating or running backups of all data is strongly
recommended before proceeding.
1. Power down the unit and set the dip switch to the factory default settin\
g (all
switches OFF).
2. While holding the SET button with a ballpoint pen, turn the...")
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ Resetting the RAID Mode NOTE: This procedure destroys all RAID data. It should not harm individual drives or their contents; however, creating or running backups of all data is strongly recommended before proceeding. 1. Power down the unit and set the dip switch to the factory default settin\ g (all switches OFF). 2. While holding the SET button with a ballpoint pen, turn the...
Page 4
![Page 4
Setting or Modifying the RAID Mode
NOTE: Setting or modifying the RAID mode destroys all data.
1. Follow the procedure for resetting the RAID Mode.
2. Power down the unit and set the dip switch to the desired RAID Mode.
3. While holding the SET button with a ballpoint pen, turn the unit on. A long beep
will sound from the Port Multiplier. The SET button may be released once the long beep
stops.
If instead of a long beep the Port Multiplier sounds a series of short b\
eeps, an error has
occurred...](http://img.usermanuals.tech/thumb/181/2421/w300_raid-tower-v-rt5835heu3-user-guide-web-1478564401_d-3.png "Page 4
Setting or Modifying the RAID Mode
NOTE: Setting or modifying the RAID mode destroys all data.
1. Follow the procedure for resetting the RAID Mode.
2. Power down the unit and set the dip switch to the desired RAID Mode.
3. While holding the SET button with a ballpoint pen, turn the unit on. A long beep
will sound from the Port Multiplier. The SET button may be released once the long beep
stops.
If instead of a long beep the Port Multiplier sounds a series of short b\
eeps, an error has
occurred...")
Setting or Modifying the RAID Mode NOTE: Setting or modifying the RAID mode destroys all data. 1. Follow the procedure for resetting the RAID Mode. 2. Power down the unit and set the dip switch to the desired RAID Mode. 3. While holding the SET button with a ballpoint pen, turn the unit on. A long beep will sound from the Port Multiplier. The SET button may be released once the long beep stops. If instead of a long beep the Port Multiplier sounds a series of short b\ eeps, an error has occurred...
Page 5
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Raid M ode BZS1 EZ M2 M1 M0
JB O D ( Indiv id u al d riv e s) * FA C TO RY D EFA U LT SETTIN G
O FF O FF2 O FF O FF O FF
0 O FF O N3 ON ON ON
1 o r 1 0 O FF O FF O N O N O FF
3 O FF OFF O
N ON
OFF
5 O FF O FF O FF O N OFF
CL ONE OFF OFF OFF O N ON
LA RG E O FF O N3 ON OFF O N
1 Audible alarm is recommended at all times....
Page 6
![Page 6
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
RAID 3 (Stripe set with dedicated parity)
Number of drives: at least 3
Unit capacity: size of one member times number of members minus one.
Spares: yes
Fault tolerance: can withstand the loss of one drive without losing data\
.
RAID 3 works by striping data for individual I/O blocks across all membe\
rs except
one, which contains parity data for the stripe set computed by the Port \...](http://img.usermanuals.tech/thumb/181/2421/w300_raid-tower-v-rt5835heu3-user-guide-web-1478564401_d-5.png "Page 6
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
RAID 3 (Stripe set with dedicated parity)
Number of drives: at least 3
Unit capacity: size of one member times number of members minus one.
Spares: yes
Fault tolerance: can withstand the loss of one drive without losing data\
.
RAID 3 works by striping data for individual I/O blocks across all membe\
rs except
one, which contains parity data for the stripe set computed by the Port \...")
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ RAID 3 (Stripe set with dedicated parity) Number of drives: at least 3 Unit capacity: size of one member times number of members minus one. Spares: yes Fault tolerance: can withstand the loss of one drive without losing data\ . RAID 3 works by striping data for individual I/O blocks across all membe\ rs except one, which contains parity data for the stripe set computed by the Port \...
Page 7
www.addonics.com Phone: 408-573-8580 Fax: 408-573-8588 Email: http://www.addonics.com/sales/query/ CONTACT US