Addonics Technologies RAID Tower V NT5SNES1G User Manual

Technical Support
If you need any assistance to get your unit functioning properly, please have 
your product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
T E C H N O L O G I E S
www.addonics.com
NAS Tower
(NT5SNES1G)
User Guide
Installation
Network Connection
The NAS Tower is factory configured for dynamic IP addressing (DHCP client). 
Connect the unit to a network (router or switch) where DHCP...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Overview
Installation
Network Connection
The NAS Tower is factory configured for dynamic IP addressing (DHCP client). 
Connect the unit to a network (router or switch) where DHCP is supported. 
Static IP may be assigned later after initial setup.
Storage
The NAS Tower does not support FIS switching for port multipliers, therefore 
the installed drives must be configured as a RAID...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Installation
Network Connection
The NAS Tower is factory configured for dynamic IP addressing (DHCP client). 
Connect the unit to a network (router or switch) where DHCP is supported. 
Static IP may be assigned later after initial setup.
Storage
The NAS Tower does not support FIS switching for port multipliers, therefore 
the installed drives must be configured as a RAID array....

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Installation
Network Connection
The NAS Tower is factory configured for dynamic IP addressing (DHCP client). 
Connect the unit to a network (router or switch) where DHCP is supported. 
Static IP may be assigned later after initial setup.
Storage
The NAS Tower does not support FIS switching for port multipliers, therefore 
the installed drives must be configured as a RAID array....

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Installation
Network Connection
The NAS Tower is factory configured for dynamic IP addressing (DHCP client). 
Connect the unit to a network (router or switch) where DHCP is supported. 
Static IP may be assigned later after initial setup.
Storage
The NAS Tower does not support FIS switching for port multipliers, therefore 
the installed drives must be configured as a RAID array....

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Installation
Network Connection
The NAS Tower is factory configured for dynamic IP addressing (DHCP client). 
Connect the unit to a network (router or switch) where DHCP is supported. 
Static IP may be assigned later after initial setup.
Storage
The NAS Tower does not support FIS switching for port multipliers, therefore 
the installed drives must be configured as a RAID array....

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Installation
Network Connection
The NAS Tower is factory configured for dynamic IP addressing (DHCP client). 
Connect the unit to a network (router or switch) where DHCP is supported. 
Static IP may be assigned later after initial setup.
Storage
The NAS Tower does not support FIS switching for port multipliers, therefore 
the installed drives must be configured as a RAID array....

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Installation
Network Connection
The NAS Tower is factory configured for dynamic IP addressing (DHCP client). 
Connect the unit to a network (router or switch) where DHCP is supported. 
Static IP may be assigned later after initial setup.
Storage
The NAS Tower does not support FIS switching for port multipliers, therefore 
the installed drives must be configured as a RAID array....

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Configuring the Port Multiplier Using the JMicron RAID Manager
Windows users may install the JMicron HW RAID Manager application 
located on the SATA Controller CD, or download it from 
http://addonics.com/drivers/driver_list.php. In the CD, browse to Config\
ura -
tion Utilities → JMB393.
Mac and Linux users may download those versions of the same utility from\...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Next, click the Basic RAID Configuration tab and select the type of RAID\
 
desired. Note that RAID 1 is currently disabled as an option since more \
than 
two individual drives are available, and DELETE ALL RAID is disabled since 
there are currently no arrays to delete. Shown below is the same set of \
drives being selected as a LARGE array.
Finally, click Apply. The Jmicron RAID...