Home > Addonics Technologies > Raid Tower > Addonics Technologies RAID Tower IX RT93SNDHMS User Manual

Addonics Technologies RAID Tower IX RT93SNDHMS User Manual

Add to Favourites
    Download as PDF

    View the Addonics Technologies RAID Tower IX RT93SNDHMS User Manual for free. All the Addonics Technologies manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 Technical Support If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at: Hours: 8:30 am - 6:00 pm PST Phone: 408-453-6212 Email: http://www.addonics.com/support/query/ v5.1.11 www.addonics.com T E C H N O L O G I E S RAID Tower IX (RT93SNDHMS) User Guide
    Page 2 www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ Removing Cover of RAID Tower IX Loosen the 5 screws at the back of the tower for the cover using a Philips screwdriver. Lift the cover and pull slightly toward the rear of the tower to disengage and remove. Power LED: lit when RAID Tower is on . Host LED: lit when array group is connected, blinks during array activity. Error LED: lit when array group has a problem, blinks if...
    Page 3 www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ Resetting the RAID Mode NOTE: This procedure destroys all RAID data. It should not harm individual drives or their contents; however, creating or running backups of all data is strongly recommended before proceeding. 1. Power down the unit and set the dip switch to the factory default setting (all switches OFF). 2. While holding the SET button with a ballpoint pen, turn the unit...
    Page 4 Setting or Modifying the RAID Mode NOTE: Setting or modifying the RAID mode destroys all data. 1. Follow the procedure for resetting the RAID Mode. 2. Power down the unit and set the dip switch to the desired RAID Mode. 3. While holding the SET button with a ballpoint pen, turn the unit on. A long beep will sound from the Port Multiplier. The SET button may be released once the long beep stops. If instead of a long beep the Port Multiplier sounds a series of short beeps, an error has occurred...
    Start reading Addonics Technologies RAID Tower IX RT93SNDHMS User Manual

    Related Manuals for Addonics Technologies RAID Tower IX RT93SNDHMS User Manual

    All Addonics Technologies manuals