Home
>
Addonics Technologies
>
Port Multiplier & Hub
>
Addonics Technologies Port Multiplier AD5HPMREU User Manual
Addonics Technologies Port Multiplier AD5HPMREU User Manual
View the Addonics Technologies Port Multiplier AD5HPMREU User Manual for free. All the Addonics Technologies manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.
![Page 2
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Cable Connections
1. Attach the SATA hard drives (up to 5) to the SATA ports on the Hardware
Port Multiplier (HPM) using SATA cables. It is recommended to connect
drives to the SATA ports 0 to 4 successively.
2. To provide power to the HPM, connect a 4-pin floppy power cable from the \
system power supply to the floppy power connector on the HPM.
3. Optional: Connect...](http://img.usermanuals.tech/thumb/181/2671/w300_port-multiplier-ad5hpmreu-1478579401_d-1.png "Page 2
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Cable Connections
1. Attach the SATA hard drives (up to 5) to the SATA ports on the Hardware
Port Multiplier (HPM) using SATA cables. It is recommended to connect
drives to the SATA ports 0 to 4 successively.
2. To provide power to the HPM, connect a 4-pin floppy power cable from the \
system power supply to the floppy power connector on the HPM.
3. Optional: Connect...")
![Page 4
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
RAID 1 or 10 (Mirror set, Stripe of mirror sets)
Number of drives: 2 (RAID 1) or 4 (RAID 10).
Unit capacity: size of one member (RAID 1) or size of two members (RA\
ID 10).
Spares: yes – if EZ mode is not disabled and 3 (RAID 1) or 5 (RAID\
10) drives
are present, the array will be initialized with a spare.
Fault tolerance: RAID 1 can withstand the loss of one drive without losi\...](http://img.usermanuals.tech/thumb/181/2671/w300_port-multiplier-ad5hpmreu-1478579401_d-3.png "Page 4
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
RAID 1 or 10 (Mirror set, Stripe of mirror sets)
Number of drives: 2 (RAID 1) or 4 (RAID 10).
Unit capacity: size of one member (RAID 1) or size of two members (RA\
ID 10).
Spares: yes – if EZ mode is not disabled and 3 (RAID 1) or 5 (RAID\
10) drives
are present, the array will be initialized with a spare.
Fault tolerance: RAID 1 can withstand the loss of one drive without losi\...")