Addonics Technologies Pocket Portable BluRayDVDRRW pdrwue User Manual

							 
 
 
 
 
 
 
Addonics 
T E C H N O L O G I E S 
 
 
 
 
Pocket eSATA/USB DVD-RRW 
 
PDRWUE & AEPDRRWUE 
 
 
 
 
 
 
 
 
User’s Guide 
 
 
 
 
FCC Warning Statement  This equipment has been tested and found to comply with the limits for a class B digital device pursuant to Part 15 of the FCC rules.  These limits are designed to provide reasonable protection against harmful interference in a residential installation.  This equipment generates, uses and can radiate radio frequency energy.  If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur in a particular installation.  If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try and correct the interference by one or more of the following suggestions. Reorient or relocate the receiving antenna Increase the distance between the equipment and the receiver  Connect the equipment to a different power outlet other than the one where receiver is connected Consult a certified television or radio technician 
Pocket Series Optical Drive Parts 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Anodized aluminum housing 
 
Two tone plastic casing 
 Drive Activity LED 
 
Drive Activity LED 
 
Eject Button 
 
110 / 220 5V  power jack 
 
USB 2.0 / 1.1 port 
 
eSATA 3.0 / 1.5 Gbps 
  
						

							              
 
               
 
 
3 Switch Modes: 
 
INT –   Used when using USB bus power (Left position) 
Green LED lights up 
OFF – Pocket Drive is turned OFF (Middle position) 
EXT –  Used when using External Power adapter (Right position) 
Green LED lights up 
 
Note:  It is recommended to use the external power adapter when burning Cd’s 
or DVD’s. The switch must be positioned in EXT mode. 
To read CD or DVD’s it is fine to use USB bus power and the switch is 
in INT mode. 
 
The Addonics Driver Disk included with the product is for Windows 98 & 98SE 
drivers only. 
 
 
 
 
Software Installation 
 
DVD and CD Copying Software Installation: 
 
1. Load the DVD and CD Copying Disc onto the CD-ROM or  
DVD-/+R/RW drive.   
2. Click on the Install Button to start installation process. 
3. Follow the On screen Wizard for installation. 
4. Wait for a few seconds to finish the installation. 
5. Restart the system when prompted. 
6. You may now burn CD or DVD disc. 
 
Note: Serial Number or CD key can be found on the CD sleeve if prompted. 
 
Please read the On-Line Help of the software for all the detail commands and 
features of the software. 
 
 
 
Technical Support 
 
If you need assistance to get your unit functioning properly, please call Addonics 
Technical Support.  Our technical staff will be happy to assist you, but they will 
need your help to do so.  Calling the technical support staff without all the proper 
information can be both time consuming and frustrating.  Here are some tips to 
help you out: 
 
MODEL NUMBER – Please have this number on hand. 
SYSTEM INFORMATION – Type of computer, peripherals, etc. 
  OPERATING SYSTEM – What version of Windows   
  WHAT’S THE TROUBLE? – Give enough information  
about your problem so that we can recreate and diagnose it. 
 
FREE Software Drivers for all Addonics Technologies 
Products are available 24 hours per day at the  
World Wide Web Site: www.addonics.com 
 
Contact Information 
Phone:  408-573-8580 
Fax:  408-573-8588 
Email:  http://www.addonics.com/sales/query/ 
Internet:  http://www.addonics.com 
 
TECHNICAL SUPPORT 
Phone:  408-453-6212 
Hours:  8:30 am - 6:00 pm PST 
Email:  http://www.addonics.com/support/query/ 
Switch between internal power through USB connection or external power using included USB power cable or 110/220 5V power adapter