Home > Addonics Technologies > Removable Drive Syst > Addonics Technologies Mobile Rack ae3rcs35n User Manual

Addonics Technologies Mobile Rack ae3rcs35n User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Addonics Technologies Mobile Rack ae3rcs35n User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 299 Addonics Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							User’s Manual 
    Features of product --- z Aluminum Frame, Aluminum cover 
    z Interface: Serial ATA 1.0 
    z High performance transfer rate up to 150MB/s 
    z Plug & play, hot swappable 
    z Point to point, free from master/slave setting 
    z SATA 15Pin & 4Pin Power connectors 
    z LED for P/S , Fan sensor & Buzzer 
    z Power Control Switch 
    z Reset Switch for buzzer alarm 
    z 8cm FAN X1 
    z Magic Handle—Auto In/Out 
    z Color for choice: black or beige 
    z Dim: 202(L) X 146(W) X 86(H) mm 
      
                      
    ---Caddy Drive Drawer Install--- 
    Use TM#6*4 long screws to mount the drive in the drawer. (see picture C) AE3RCS35NSA, AE3RCS35NSAWAddonics Technologies, Inc.            www.addonics.com          support email: [email protected] 
    						
    							---Front Panel--- (see picture D) 
      
     
    D.1--- Reset Switch for buzzer alarm and Overheating LED 
    When overheating occurs the buzzer alarms (default setting: 60 and the temperature LED retu ℃rns red 
    meanwhile buzzer is alarming and LED is blinking). press the Reset Switch to stop the alarm, and LED 
    goes off. 
    D.2--- HD1 Power SW and LED: Power on, LED indicates Green. 
    D.3--- HD2 Power SW and LED: Power on, LED indicates Green. 
    D.4--- HD3 Power SW and LED: Power on, LED indicates Green. 
    D.5--- Fan sensor LED: LED is indicating Green when it is working. When fan failed, LED turns Red. 
    D.6--- Safety Lock   
    The safety lock safeguards the hard disk in the correct position and prevent it bouncing out while 
    HDD is working. (see Picture E) 
       
    ---Rear View--- (see picture F)    
    F.1-- 4pin Power connector 
    F.2-- 15pin Serial ATA Power connector 
    F.3-- 7pin Serial ATA Signal connector 
    If your power is not from SATA 15pin 
    connector, then, use the 4pin power 
    connector, the 4pin power will 
    automatically be convert to SATA power. Addonics Technologies, Inc.            www.addonics.com          support email: [email protected] 
    						
    All Addonics Technologies manuals Comments (0)

    Related Manuals for Addonics Technologies Mobile Rack ae3rcs35n User Manual