Addonics Technologies Mixed Media Duplicator MSDU5 User Manual

							Technical Support
If you need any assistance to get your unit functioning properly, please 
have your product information ready and contact Addonics Technical 
Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
T E C H N O L O G I E S
www.addonics.com
User Guide
1:5 mSATA / micro SATA SSD Duplicator
(MSDU5)         
						

							www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Unpacking and Overview
1
Power Cord (U.S. Version Shown)
WARNING: Please remember to
set the power supply to your local outlet voltage prior to plugging in the power cord. Failure to do somay damage the power supply.
2
3
4
1. LCD Mangement Console
2. Source Slot
3. Target Slots
mSATA adapter
(ADMS18SA) x6
mSATA SSD
in the adapter Micro SATA HDD
The Duplicator Panel
There are four buttons and an LCD 
on the panel of HDD Duplicator.
4. LCD shows a function or a  
    message.
5. Use to scroll up function menus.
6. Use to scroll down function menus.
7. Use to execute a function.
8. Use to cancel a function.
Connecting the Power Cable and 
Powering On
a. Connect the power cord provided 
    from the wall outlet to the back of 
    the tower.
b. Push the power button to turn on 
    the HDD duplicator.
E
N T
ESC
57
68
Duplicator Panel 
						

							www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Quick Start
By default, the duplicator will initialize, scan for drives and offer the copy 
function. Insert the source and target drives, power up the unit,  wait \
for the 
copy function to appear, then press ENT.
Canceling Functions
When selection menu options, canceling is done by pressing ESC. When the\
 
unit is busy performing an operation such as copy, verify, or overwrite, the 
operation can be canceled by holding the ESC button until the unit beeps\
.
Duplicator Functions
The duplicator has three menu sections: The Main menu, Setup Options, and 
Advanced Setup Options. Setup Options is accessed through the Main menu.\
 
Advanced Setup Options is accessed by holding the ESC button from any 
other menu until the unit beeps.
Main Menu
1. Copy HDD
Scans the ports, then copies from the source to any targets found.
2. Async Copy HDD
Scans the ports, then copies from the source to any targets found. More \
drives may be added before the process is complete, they will begin the \
process as soon as they are detected.
3. Compare HDD
Scans the ports, then any targets found will be compared to the source.
4. Async Compare
Scans the ports, then any targets found will be compared to the source. \
More 
drives to compare may be added before the process is complete, they will\
 
begin the process as soon as they are detected.
5. PreScan Source
Reads all blocks on the source drive to confirm no I/O errors are encoun\
tered.
6. ReScan BUS
Manually scans all ports and reports how many units were found.
7. Source Size
Examines the source drive and reports total space and space used, if dri\
ve 
contains compatible partitions. Press up/down to change display, ESC to exit.
8. Secure Erase
Scans all ports, then erases all data on all connected drives. 
						

							www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
NOTE: Target drive size is still required to be equal to or greater than source\
. Only works 
with source drives formatted using Master Boot Record. If the source dri\
ve has a boot 
record other than MBR, the entire disk will be copied as if Fast Copy we\
re OFF. If the 
source drive is formatted with a Master Boot Record and contains only FAT32 or NTFS 
partitions, identical partitions will be created on the target(s) and \
only the files will be 
copied. If the source drive with MBR format includes partitions other th\
an FAT32 or NTFS, 
all sectors of all partitions (including FAT32 and NTFS) will be duplicated.
Enabling Fast Copy may not produce bootable duplicates.
10-9. Auto Start Drive
When source drive is present, inserting a target drive will cause copy 
process to begin automatically. Default setting is OFF.
10-10. Auto Start Timer
Sets delay in time after target insertion before beginning auto copy 
process if Auto Start Drive is ON. Default setting is OFF (no delay).
10-11. Tolerance Size
Sets the minimum target size in percentage compared to the source that 
is allowed to use for copying. Default is 100% (equal in size).
NOTE: Leaving this setting at 100% or using for minor adjustments only 
is strongly recommended. Permitting target size less than source size 
may result in inaccurate copies.
10-12. BootTime Delay
This option is used to set boot delay time. Default setting is 5 seconds\
.
10-13. Quick Compare 
Sets Compare function to stop after a small amount of data has been 
verified, up to 100MBytes. Default setting is OFF.
10-14. Copy with Size
Causes duplicate drive to report to an operating system the exact same 
total size as source when copy is complete. Works only on drives format -
ted using a Master Boot Record. Default setting is OFF.
Advanced Setup Options
11-01. Read Error Skip
Allows duplicator to ignore I/O errors while reading source drive. Defau\
lt 
setting is OFF.
11-02. Update Firmware
Used to apply firmware updates. Connect a drive formatted as FAT 
containing one partition with the firmware file in the root directory. 
						

							www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
NOTE: This function scans the entire disk before proceeding. Providing a drive\
 that is as 
small as possible is strongly recommended.
11-03. Compare Firmware
Used to confirm correct firmware. Connect a drive formatted as FAT 
containing one partition with the firmware file in the root directory.
NOTE: This function scans the entire disk before proceeding. Providing a 
drive that is as small as possible is strongly recommended.
11-04. Quick Erase HDD
Scans the ports, then quickly erases all sectors on all connected drives\
.
11-05. Full Erase HDD
Scans the ports, then completely erases all sectors on all connected 
drives.
11-06. H/W Diagnostic
Starts comprehensive tests for Ram, LCD, buttons, ports and Flash.
11-07. Load Default
Resets all configuration settings to default.
11-08. Copy HPA
Enables copy functions to duplicate the source drives Host Protected 
Area. Normally this area is defined as not available to a host controlle\
r as 
defined by ATA/SATA specifications.
11-09. Burn In
Runs a function continuously until aborted. Selections are Copy & 
Compare, Compare, Async Cpy & Cmp, Async Compare. 
						

							www.addonics.com
Phone:   408-573-8580
Fax:     408-573-8588
Email:   http://www.addonics.com/sales/query/
CONTACT US